Fluke OneTouch Series II User manual

Brand: Fluke

Model: OneTouch Series II

Category: Networking

Type: User manual

This manual is also suitable for

series II

OneTouch Series II

Network Assistant

Users Manual

September 1999 Rev. 1, 11/00

All product names are trademarks of their respective companies.

LIMITED WARRANTY & LIMITATION OF LIABILITY

Fluke Corporation (Fluke) warrants its products to be free from

defects in material and workmanship under normal use and

service for one (1) year, beginning on the date of shipment. This

warranty extends only to the original buyer or end-user customer

of a Fluke authorized reseller, and does not apply to fuses, bat-

teries or to any product which, in Fluke’s opinion, has been mis-

used, altered, neglected or damaged by accident or abnormal

conditions of operation or handling. Fluke warrants that software

will operate on appropriate Fluke instruments substantially in

accordance with its functional specifications for 90 days and that

it has been properly recorded on non-defective media. Fluke

does not warrant that software will be error free or operate with-

out interruption.

Fluke authorized resellers shall extend this warranty on new and

unused products to end-user customers only but have no

authority to extend a greater or different warranty on behalf of

Fluke.

Fluke’s warranty obligation is limited, at Fluke’s option, to refund

of the purchase price, or free of charge repair or replacement of

a defective product which is returned to an authorized Fluke

Service Center within the warranty period.

To obtain warranty service, call Fluke for instructions at the

number listed in the Appendix. Following warranty repair, the

product will be returned to Buyer, transportation prepaid (FOB

Destination). If Fluke determines that the failure was caused by

misuse, alteration, accident or abnormal condition of operation or

handling, Fluke will provide an estimate of repair costs and ob-

tain authorization before commencing the work. Following re-

pair, the product will be returned to the Buyer transportation

prepaid and the Buyer will be billed for the repair and return

transportation charges (FOB Shipping Point).

Warranty service is available outside the United States only if

product was purchased through a Fluke Authorized Sales Outlet

in the country of use or the applicable Fluke international price

was paid. Product transported from the United States for which

the applicable Fluke international price was not paid must be

returned to the U.S. to receive warranty service, at the shipment

expense and risk of Buyer. Fluke reserves the right to invoice

Buyer for importation costs of repair/replacement parts when

product purchased in one country is submitted for repair in an-

other country.

THIS WARRANTY IS PURCHASER’S SOLE AND EXCLUSIVE

REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FIT-

NESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT

BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING

LOSS OF DATA, WHETHER ARISING FROM BREACH OF

WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE

OR ANY OTHER THEORY.

Since some countries or states do not allow limitation of the term

of an implied warranty, or exclusion or limitation of incidental or

consequential damages, the limitations and exclusions of this

warranty may not apply to every buyer. If any provision of this

Warranty is held invalid or unenforceable by a court of compe-

tent jurisdiction, such holding will not affect the validity or en-

forceability of any other provision of this warranty.

Fluke Corporation

P.O. Box 9090

Everett WA 98206-9090

FlukeEurope B.V.

P.O. Box 1186

5602 B.D. Eindhoven

The Netherlands

Table of Contents

Chapter Title Page

1 Introduction.................................................................................................................. 1-1

Introducing the OneTouch Series II Network Assistant.................................................. 1-1

Software Version....................................................................................................... 1-2

Supplied Equipment.................................................................................................. 1-2

Optional Equipment .................................................................................................. 1-2

Placing Orders and Getting Assistance .................................................................... 1-3

2 Autotest and Central Setup......................................................................................... 2-1

Introduction....................................................................................................................2-1

Device Discovery Process ........................................................................................ 2-2

Identifying Routers............................................................................................... 2-2

Device Icons......................................................................................................... 2-3

Station Detail Display................................................................................................ 2-8

Viewing Multiple Protocols on Station Detail Displays.......................................... 2-9

NetWare Devices List ............................................................................................... 2-9

NetWare Print Server List.............................................................................................. 2-11

TCP/IP Devices Display............................................................................................ 2-11

Sorting ...................................................................................................................... 2-15

Address Entry Keypad .............................................................................................. 2-16

OneTouch Series II

Users Manual

Central Setup ............................................................................................................ 2-17

IP Config............................................................................................................... 2-17

Using DHCP to Get an IP Source Address........................................................... 2-19

SNMP ................................................................................................................... 2-21

3 Network Health............................................................................................................. 3-1

Introduction ....................................................................................................................3-1

Interpreting Error Results .......................................................................................... 3-8

Collisions.............................................................................................................. 3-8

Late Collisions ...................................................................................................... 3-8

Short Frames........................................................................................................ 3-8

Jabbers................................................................................................................. 3-8

Bad Frame Check Sequence (FCS)..................................................................... 3-8

Tracking Addresses................................................................................................... 3-9

Local vs. Remote Stations......................................................................................... 3-9

4 Cable Tests................................................................................................................... 4-1

Introduction ....................................................................................................................4-1

Cable Autotest........................................................................................................... 4-2

Split Pairs.............................................................................................................. 4-2

Cable Length Results ........................................................................................... 4-2

Wiremap Cable..................................................................................................... 4-3

Identifying Cables...................................................................................................... 4-4

Toner.................................................................................................................... 4-4

Define Cable......................................................................................................... 4-4

Basic Cable Concepts............................................................................................... 4-4

Twisted Pair Cables.............................................................................................. 4-5

Reversed Pair....................................................................................................... 4-6

Contents

(continued)

iii

Crossed Pair ........................................................................................................ 4-6

Split Pair............................................................................................................... 4-6

Cable Length........................................................................................................ 4-7

Cable Termination................................................................................................ 4-8

Test Fiber Optic Cable................................................................................................... 4-10

Ensuring Accurate Measurements............................................................................ 4-10

Setting a Reference.................................................................................................. 4-10

Measuring Optical Loss............................................................................................. 4-11

Measuring Output Power .......................................................................................... 4-11

5 NIC/Hub Tests.............................................................................................................. 5-1

Introduction....................................................................................................................5-1

NIC Autotest.............................................................................................................. 5-2

Hub Autotest............................................................................................................. 5-3

Viewing Hub Capabilities.......................................................................................... 5-3

NIC Detector............................................................................................................. 5-4

Flash Hub Port.......................................................................................................... 5-4

6 Connectivity Tests....................................................................................................... 6-1

Introduction....................................................................................................................6-1

IP Trace Route.......................................................................................................... 6-2

IP & NetWare Ping.................................................................................................... 6-2

Entering IPX Addresses....................................................................................... 6-3

Conducting a Ping Station Test................................................................................. 6-4

Key Device Ping........................................................................................................ 6-6

Interpreting Ping Test Results................................................................................... 6-8

ConfigMaster............................................................................................................. 6-8

Station Locator.......................................................................................................... 6-10

OneTouch Series II

Users Manual

Find MAC.............................................................................................................. 6-10

Find IP.................................................................................................................. 6-11

Mode of Operation................................................................................................ 6-11

Results.................................................................................................................. 6-11

7 ITO – Internetwork Throughput Option...................................................................... 7-1

Introduction ....................................................................................................................7-1

ITO/xDSL Throughput Test ....................................................................................... 7-2

ITO/xDSL Theory of Operation............................................................................. 7-2

Basic Operation.................................................................................................... 7-4

Conducting a Throughput Test............................................................................. 7-4

Connecting and configuring the Remote Unit....................................................... 7-7

Connecting and configuring the Local Unit........................................................... 7-7

Results Displayed During the Throughput Test .................................................... 7-13

Final Test Results................................................................................................. 7-13

ITO/xDSL Traffic Generator....................................................................................... 7-15

MAC Mode............................................................................................................ 7-17

IP Mode................................................................................................................ 7-17

MAC and IP Mode Results.................................................................................... 7-18

Ping Mode ............................................................................................................ 7-19

Ping Mode Results................................................................................................ 7-20

Appendices

A Specifications.......................................................................................................... A-1

B Basic Maintenance.................................................................................................. B-1

C Web Remote Control............................................................................................... C-1

D Glossary.................................................................................................................. D-1

Index

List of Tables

Table Title Page

2-1. Device Icons......................................................................................................................... 2-4

2-2. TCP/IP Device Icons............................................................................................................. 2-13

3-1. Network Health Meters ......................................................................................................... 3-5

4-1. Fiber Test Terminology......................................................................................................... 4-11

7-1. ITO and xDSL Terminology .................................................................................................. 7-1

OneTouch Series II

Users Manual

vii

List of Figures

Figure Title Page

1-1. OneTouch-10/100 Series II Network Assistant ..................................................................... 1-2

2-1. Autotest Display.................................................................................................................... 2-2

2-2. Station Filter.......................................................................................................................... 2-6

2-3. Station List Information......................................................................................................... 2-6

2-4. NetBIOS Information............................................................................................................. 2-6

2-5. Novell Server Information ..................................................................................................... 2-7

2-6. Station Detail ........................................................................................................................ 2-8

2-7. Ping SNMP Results .............................................................................................................. 2-9

2-8. Station Running Multiple Protocols....................................................................................... 2-9

2-9. NetWare File Server List....................................................................................................... 2-10

2-10. Netware File Server Information........................................................................................... 2-11

2-11. TCP/IP Devices Display........................................................................................................ 2-12

2-12. Local Station List................................................................................................................... 2-15

2-13. Sort Options.......................................................................................................................... 2-16

2-14. Address Entry Keypad.......................................................................................................... 2-16

2-15. Central Setup........................................................................................................................ 2-17

2-16. IP Address Configuration...................................................................................................... 2-18

2-17. Address Entry Keypad.......................................................................................................... 2-19

2-18. DHCP Display....................................................................................................................... 2-20

OneTouch Series II

Users Manual

viii

2-19. Security Setup....................................................................................................................... 2-21

2-20. SNMP.................................................................................................................................... 2-22

2-21. Community String Editor........................................................................................................ 2-23

3-1. Network Health...................................................................................................................... 3-1

3-2. Top Senders Display............................................................................................................. 3-2

3-3. Station Detail......................................................................................................................... 3-3

3-4. Network Health Test Meter Icon............................................................................................ 3-3

3-5. Station Addresses ................................................................................................................. 3-8

4-1. Cable Tests........................................................................................................................... 4-1

4-2. Wiremap Results................................................................................................................... 4-3

4-3. Reversed Pair........................................................................................................................ 4-6

4-4. Crossed Pair.......................................................................................................................... 4-6

4-5. Split Pair................................................................................................................................ 4-7

4-6. Cable Termination................................................................................................................. 4-9

4-7. Fiber Test Results................................................................................................................. 4-12

4-8. Connections for Setting a Reference Level........................................................................... 4-13

4-9. Connections for Measuring Optical Loss............................................................................... 4-14

4-10. Connections for Measuring Output Power............................................................................. 4-15

5-1. NIC/Hub Test......................................................................................................................... 5-1

5-2. NIC Autotest.......................................................................................................................... 5-2

5-3. Hub Autotest Display............................................................................................................. 5-3

5-4. NIC Detector.......................................................................................................................... 5-4

5-5. Flash Hub Port Display.......................................................................................................... 5-6

6-1. Connectivity Tests Display .................................................................................................... 6-1

6-2. IP Trace Route...................................................................................................................... 6-2

6-3. IP & NetWare Ping Display.................................................................................................... 6-2

6-4. NetWare Ping........................................................................................................................ 6-3

6-5. IP Ping................................................................................................................................... 6-3

Contents

(continued)

6-6. IP and NetWare Ping............................................................................................................ 6-5

6-7. IP Ping Results ..................................................................................................................... 6-5

6-8. NetWare Ping Results........................................................................................................... 6-5

6-9. Ping Key Devices.................................................................................................................. 6-6

6-10. IP Configuration.................................................................................................................... 6-7

6-11. Edit Key Devices................................................................................................................... 6-7

6-12. ConfigMaster ........................................................................................................................ 6-9

6-13. Station Locator...................................................................................................................... 6-10

6-14. Station Locator Information................................................................................................... 6-12

7-1. Local and Remote Units........................................................................................................ 7-3

7-2. ITO Local Unit and Possible Remote Unit Locations............................................................ 7-5

7-3. xDSL Test Connections........................................................................................................ 7-6

7-4. Local Unit Configuration Display for Throughput Test........................................................... 7-8

7-5. xDSL Central Office (Remote) Connections ......................................................................... 7-9

7-6. xDSL Subscriber-end Connections....................................................................................... 7-10

7-7. ITO Results Shown During the Test...................................................................................... 7-13

7-8. Final ITO Throughput Test Results....................................................................................... 7-14

7-9. Traffic Generator Setup Display............................................................................................ 7-16

7-10. MAC or IP Mode Sample Results ......................................................................................... 7-19

7-11. Ping Mode Sample Results................................................................................................... 7-21

C-1. Web Agent............................................................................................................................ C-2

OneTouch Series II

Users Manual

1-1

Chapter 1

Introduction

Introducing the OneTouch Series II

Network Assistant

The Fluke OneTouch Series II Network Assistant

(hereafter referred to as the "Network Assistant") provides

quick solutions to the most common problems found

when installing and troubleshooting Ethernet networks.

The Network Assistant is a portable, handheld instrument

that is operated using a touchscreen user interface.

XCaution

Take care not to damage the touchscreen

with any sharp, pointed, or hard objects. For

additional information, see “Essentials” in

the Getting Started Manual.

The OneTouch Series II is available in three models:

OneTouch Series II 10

OneTouch Series II 10/100

OneTouch Series II 10/100 Pro

OneTouch Series II Pro features include:

Station Locator

Key Device Ping

ConfigMaster

Web Remote Control

These features are discussed throughout this manual in

the pertinent sections. Read the

OneTouch Series II

Network Assistant Getting Started Manual

(P/N 1279870)

that came with your purchase to become familiar with and

quickly begin using your OneTouch Series II Network

Assistant. You can also access

http://www.flukenetworks.com and navigate to the

OneTouch Series II area to access software and

OneTouch Series II

Users Manual

1-2

documents. Adobe Acrobat Reader is required to view the

documents. It is included on the CD-ROM that came with

your purchase or downloadable from www.adobe.com.

Software Version

To determine the version of the software in the OneTouch

Series II Network Assistant, press the green button to turn

the Network Assistant on then press

The software version number is displayed on the Help

screen. To update the software version for your Network

Assistant, read the

OneTouch Series II Getting Started

Manual

and the OneTouch Link program online help.

Supplied Equipment

The following is supplied with the Network Assistant:

NiMH Rechargeable Battery Pack

Universal AC Power Adapter

Cable Identifier 1

Instrument Softcase

Power Cord

Network Assistant Strap and Holster

CD-ROM Disk

OneTouch Series II Users Manual

OneTouch Link Program

OneTouch Reporter

ace010f.eps

Figure 1-1. OneTouch-10/100 Series II Network

Assistant

Optional Equipment

The following optional items and can be purchased

through Fluke or your local distributor:

NiMH Rechargeable Battery Pack (P/N N6600/NBP)

Cable Identifier Set -- numbers 2 through 6 (P/N

N6600/RA)

Introduction

Introducing the OneTouch Series II Network Assistant

1-3

UTP Accessory Kit (P/N N6703)

Extra

OneTouch Series II Network Assistant Getting

Started Manual

Placing Orders and Getting Assistance

To locate an authorized service center, visit us on the

World Wide Web at www.flukenetworks.com or call

Fluke using the phone numbers listed below:

North America : 1-800-28FLUKE (1-800-283-5853)

Europe: +31 40-267-8300

Japan: +81-3-3434-0188

Singapore: +65-

-738-5655

Anywhere in the world: +1-425-446-4519

For application related questions, send email to:

fluke-assist@flukenetworks.com.

2-1

Chapter 2

Autotest and Central Setup

Introduction

AutoTest and Central Setup are two critical elements of

using your Network Assistant. To run AutoTest, press

(AutoTest) on the top-level display. The Network

Assistant will take one of several courses of action.

If a link pulse is detected, it searches for devices on

the network. The devices on your segment are

shown by protocol on the AutoTest display. The map

view shows a summary of device types, including the

Network Assistant itself and the hub , which

shows hub capability (Figure 2-1).

If it detects a wire mapper (office locator), it will map

the cable.

If it detects the Fiber Optic Module (FOM), it will

report the results.

If it detects an open cable, it will perform Time

Domain Reflectometry (TDR) on the cable to

determine cable length, characteristic impedance,

and other parameters.

If no link pulse is detected but it detects termination,

no data will be found and you will see the message,

No cable tests when plugged into an active

device.

This could happen if it is plugged into a hub

or NIC that is not turned on.

If link is detected, you can get the same information via

AutoTest or Network Health from the main menu. You

can then use the tabs to navigate between the different

views. The difference between AutoTest and Network

Health is that AutoTest restarts the discovery process

from the beginning, including DHCP addresses (if

enabled). Network Health allows you to view the

information without a discovery restart. Pressing AutoTest

is the same as unplugging the network cable and then

OneTouch Series II

Users Manual

2-2

plugging it back in. This is also the same as pressing

the

(Rerun) button.

Press a displayed device, cable, or hub icon to see a

popup screen showing more information about that item.

Close the resulting popup screen by pressing

ace201s.bmp

Figure 2-1. AutoTest Display

AutoTest continues to discover devices and to count

frames and errors even after you exit the screen by

pressing

(up one level). The Network Health test runs

in the background (read Chapter 3).

Device Discovery Process

When you attach the Network Assistant to a network, it

immediately begins searching for servers, routers,

printers, and switches. This search occurs whenever the

Network Assistant gains link pulse regardless of the

current menu.

During the discovery process (5-20 seconds, depending

on network), the Network Assistant processes only the

discovery response frames and broadcast frames. When

the discovery process has finished, the Network Assistant

goes into promiscuous mode. In this mode, it processes all

frames and reports all stations that talk on the network.

Identifying Routers

The Network Assistant also transmits RIP requests and

ICMP router requests as part of its router discovery

process. These discovery packets request router

information, allowing the Network Assistant to locate

routers that have little traffic and are not sending routing

updates.

Autotest and Central Setup

Introduction

2-3

The Network Assistant will identify as a router any device

advertising one of the following router protocols: RIP,

IGRP, EIGRP, IRDP, or OSPF.

Therefore, if a router is statically configured (i.e., is not

sending out routing updates), it may not show up as a

router.

The Network Assistant will identify any IP device that is

transmitting periodic router updates as a router. Therefore,

the Network Assistant identifies a workstation that is

inadvertently configured as a router.

Device Icons

Pressing a flashing device icon displays a popup screen

that shows information about problems with that device.

Close the popup window by pressing

. The device

icons are described in Table 2-1.

OneTouch Series II

Users Manual

2-4

Table 2-1. Device Icons

Icon Meaning Operations

Network

Assistant

Press to display the MAC address and software/hardware versions for your instrument.

Station Filter Press to filter out station types of low or no interest to you (Figure 2-2). You can unselect the

following: MAC Only (no L3 Address), IP Address, IPX, DECNET, and APPLETALK

Stations Press to display a list of stations on the network (Figure 2-3). Stations are listed by name by

default. You can also sort other ways (Frame Count, Protocol, Device Type, and MAC

address) by pressing

(Station List Sort). For more details, see "Tracking Addresses" and

"Local versus Remote Stations" in Chapter 3. Press a line in the station list to see a Station

Detail display (Figure 2-6). For more information, read "Station Detail Display."

NetWare Press to display a list of NetWare servers (Figure 2-5). Read “NetWare Devices List” for

more information. If there are more devices than will fit on the display, you can scroll through

the list.

NetBIOS Press to display a scrollable list of all NetBIOS servers with their network addresses and

protocols detected on the segment (Figure 2-4).

Autotest and Central Setup

Introduction

2-5

Table 2-1. Device Icons (Cont.)

Icon Meaning Operation

TCP/IP

Devices

Press to display IP routers, servers, stations and other devices detected on the network that are

running TCP/IP (Figure 2-11). Pressing an icon on the TCP/IP Devices display generates a list

of devices of that type. For more information, read “TCP/IP Devices."

Hub

Press to display general information about the status of the Hub. This information includes

whether the link is active and its activity level. The following fields within the Hub popup window

indicate the Hub’s status.

Capability

Speed

Duplex Mode

Link Pulse Status

Duplex

Polarity

RX Level (receive pair)

Normal:

Hub signal level is within specification.

Marginal:

Hub signal level is not within specification. (The problem is either excessive

attenuation in the cable or a defective Hub port.)

Cable

Press to display cable length and fault information (when the Network Assistant is not connected

to an active device). The Network Assistant displays the length to the first fault it detects. For

more details, see "Cable Autotest" in Chapter 4.

Page is loading ...

Fluke OneTouch Series II User manual

Brand: Fluke

Model: OneTouch Series II

Category: Networking

Type: User manual

This manual is also suitable for

series II

Download PDF

report

Fluke OneTouch Series II User manual

This manual is also suitable for

Fluke OneTouch Series II User manual

Related papers

Other documents