Avaya Bay Command Console (AN/BN Routers) User manual

Part No. 117383-A Rev. A

September 1997

BayRS Version 12.00

BCC Version 3.10

Using the

Bay Command Console

(AN/BN Routers)

ii

117383-A Rev. A

4401 Great America Parkway 8 Federal Street

Santa Clara, CA 95054 Billerica, MA 01821

The information in this document is subject to change without notice. The statements, conﬁgurations, technical data,

and recommendations in this document are believed to be accurate and reliable, but are presented without express or

implied warranty. Users must take full responsibility for their applications of any products speciﬁed in this document.

The information in this document is proprietary to Bay Networks, Inc.

The software described in this document is furnished under a license agreement and may only be used in accordance

with the terms of that license. A summary of the Software License is included in this document.

Trademarks

AN, BCN, BLN, BN, FRE, and Bay Networks are registered trademarks and ANH, Bay Networks Press, and the Bay

Networks logo are trademarks of Bay Networks, Inc.

All other trademarks and registered trademarks are the property of their respective owners.

Restricted Rights Legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subparagraph

(c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013.

Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer

software, the rights of the United States Government regarding its use, reproduction, and disclosure are as set forth in

the Commercial Computer Software-Restricted Rights clause at FAR 52.227-19.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, Bay Networks, Inc. reserves the

right to make changes to the products described in this document without notice.

Bay Networks, Inc. does not assume any liability that may occur due to the use or application of the product(s) or

circuit layout(s) described herein.

reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above

copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials,

and other materials related to such distribution and use acknowledge that such portions of the software were

developed by the University of California, Berkeley. The name of the University may not be used to endorse or

promote products derived from such portions of the software without speciﬁc prior written permission.

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

In addition, the program and information contained herein are licensed only pursuant to a license agreement that

contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed

by third parties).

117383-A Rev. A

iii

Bay Networks, Inc. Software License Agreement

NOTICE:

Please carefully read this license agreement before copying or using the accompanying software or

installing the hardware unit with pre-enabled software (each of which is referred to as “Software” in this Agreement).

BY COPYING OR USING THE SOFTWARE, YOU ACCEPT ALL OF THE TERMS AND CONDITIONS OF THIS

LICENSE AGREEMENT. THE TERMS EXPRESSED IN THIS AGREEMENT ARE THE ONLY TERMS UNDER

WHICH BAY NETWORKS WILL PERMIT YOU TO USE THE SOFTWARE. If you do not accept these terms and

conditions, return the product, unused and in the original shipping container, within 30 days of purchase to obtain a

credit for the full purchase price.

1. License Grant.

Bay Networks, Inc. (“Bay Networks”) grants the end user of the Software (“Licensee”) a personal,

nonexclusive, nontransferable license: a) to use the Software either on a single computer or, if applicable, on a single

authorized device identiﬁed by host ID, for which it was originally acquired; b) to copy the Software solely for backup

purposes in support of authorized use of the Software; and c) to use and copy the associated user manual solely in

support of authorized use of the Software by Licensee. This license applies to the Software only and does not extend

to Bay Networks Agent software or other Bay Networks software products. Bay Networks Agent software or other

Bay Networks software products are licensed for use under the terms of the applicable Bay Networks, Inc. Software

License Agreement that accompanies such software and upon payment by the end user of the applicable license fees

for such software.

2. Restrictions on use; reservation of rights.

The Software and user manuals are protected under copyright laws.

Bay Networks and/or its licensors retain all title and ownership in both the Software and user manuals, including any

revisions made by Bay Networks or its licensors. The copyright notice must be reproduced and included with any

copy of any portion of the Software or user manuals. Licensee may not modify, translate, decompile, disassemble, use

for any competitive analysis, reverse engineer, distribute, or create derivative works from the Software or user

manuals or any copy, in whole or in part. Except as expressly provided in this Agreement, Licensee may not copy or

transfer the Software or user manuals, in whole or in part. The Software and user manuals embody Bay Networks’ and

its licensors’ conﬁdential and proprietary intellectual property. Licensee shall not sublicense, assign, or otherwise

disclose to any third party the Software, or any information about the operation, design, performance, or

implementation of the Software and user manuals that is conﬁdential to Bay Networks and its licensors; however,

Licensee may grant permission to its consultants, subcontractors, and agents to use the Software at Licensee’s facility,

provided they have agreed to use the Software only in accordance with the terms of this license.

3. Limited warranty.

Bay Networks warrants each item of Software, as delivered by Bay Networks and properly

installed and operated on Bay Networks hardware or other equipment it is originally licensed for, to function

substantially as described in its accompanying user manual during its warranty period, which begins on the date

Software is ﬁrst shipped to Licensee. If any item of Software fails to so function during its warranty period, as the sole

remedy Bay Networks will at its discretion provide a suitable ﬁx, patch, or workaround for the problem that may be

included in a future Software release. Bay Networks further warrants to Licensee that the media on which the

Software is provided will be free from defects in materials and workmanship under normal use for a period of 90 days

from the date Software is ﬁrst shipped to Licensee. Bay Networks will replace defective media at no charge if it is

returned to Bay Networks during the warranty period along with proof of the date of shipment. This warranty does not

apply if the media has been damaged as a result of accident, misuse, or abuse. The Licensee assumes all responsibility

for selection of the Software to achieve Licensee’s intended results and for the installation, use, and results obtained

from the Software. Bay Networks does not warrant a) that the functions contained in the software will meet the

Licensee’s requirements, b) that the Software will operate in the hardware or software combinations that the Licensee

may select, c) that the operation of the Software will be uninterrupted or error free, or d) that all defects in the

operation of the Software will be corrected. Bay Networks is not obligated to remedy any Software defect that cannot

be reproduced with the latest Software release. These warranties do not apply to the Software if it has been (i) altered,

except by Bay Networks or in accordance with its instructions; (ii) used in conjunction with another vendor’s product,

resulting in the defect; or (iii) damaged by improper environment, abuse, misuse, accident, or negligence. THE

FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL

OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of

its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or

altered ﬁles, data, or programs.

iv

117383-A Rev. A

4. Limitation of liability.

IN NO EVENT WILL BAY NETWORKS OR ITS LICENSORS BE LIABLE FOR ANY

COST OF SUBSTITUTE PROCUREMENT; SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES; OR ANY DAMAGES RESULTING FROM INACCURATE OR LOST DATA OR LOSS OF USE OR

PROFITS ARISING OUT OF OR IN CONNECTION WITH THE PERFORMANCE OF THE SOFTWARE, EVEN

IF BAY NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT

SHALL THE LIABILITY OF BAY NETWORKS RELATING TO THE SOFTWARE OR THIS AGREEMENT

EXCEED THE PRICE PAID TO BAY NETWORKS FOR THE SOFTWARE LICENSE.

5. Government Licensees.

This provision applies to all Software and documentation acquired directly or indirectly

by or on behalf of the United States Government. The Software and documentation are commercial products, licensed

on the open market at market prices, and were developed entirely at private expense and without the use of any U.S.

Government funds. The license to the U.S. Government is granted only with restricted rights, and use, duplication, or

disclosure by the U.S. Government is subject to the restrictions set forth in subparagraph (c)(1) of the Commercial

Computer Software––Restricted Rights clause of FAR 52.227-19 and the limitations set out in this license for civilian

agencies, and subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause of DFARS

252.227-7013, for agencies of the Department of Defense or their successors, whichever is applicable.

6. Use of Software in the European Community.

This provision applies to all Software acquired for use within the

European Community. If Licensee uses the Software within a country in the European Community, the Software

Directive enacted by the Council of European Communities Directive dated 14 May, 1991, will apply to the

examination of the Software to facilitate interoperability. Licensee agrees to notify Bay Networks of any such

intended examination of the Software and may procure support and assistance from Bay Networks.

7. Term and termination.

This license is effective until terminated; however, all of the restrictions with respect to

Bay Networks’ copyright in the Software and user manuals will cease being effective at the date of expiration of the

Bay Networks copyright; those restrictions relating to use and disclosure of Bay Networks’ conﬁdential information

shall continue in effect. Licensee may terminate this license at any time. The license will automatically terminate if

Licensee fails to comply with any of the terms and conditions of the license. Upon termination for any reason,

Licensee will immediately destroy or return to Bay Networks the Software, user manuals, and all copies. Bay

Networks is not liable to Licensee for damages in any form solely by reason of the termination of this license.

8. Export and Re-export.

Licensee agrees not to export, directly or indirectly, the Software or related technical data

or information without ﬁrst obtaining any required export licenses or other governmental approvals. Without limiting

the foregoing, Licensee, on behalf of itself and its subsidiaries and afﬁliates, agrees that it will not, without ﬁrst

obtaining all export licenses and approvals required by the U.S. Government: (i) export, re-export, transfer, or divert

any such Software or technical data, or any direct product thereof, to any country to which such exports or re-exports

are restricted or embargoed under United States export control laws and regulations, or to any national or resident of

such restricted or embargoed countries; or (ii) provide the Software or related technical data or information to any

military end user or for any military end use, including the design, development, or production of any chemical,

nuclear, or biological weapons.

9. General.

If any provision of this Agreement is held to be invalid or unenforceable by a court of competent

jurisdiction, the remainder of the provisions of this Agreement shall remain in full force and effect. This Agreement

will be governed by the laws of the state of California.

Should you have any questions concerning this Agreement, contact Bay Networks, Inc., 4401 Great America Parkway,

P.O. Box 58185, Santa Clara, California 95054-8185.

LICENSEE ACKNOWLEDGES THAT LICENSEE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND

AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. LICENSEE FURTHER AGREES THAT THIS

AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN BAY NETWORKS AND

LICENSEE, WHICH SUPERSEDES ALL PRIOR ORAL AND WRITTEN AGREEMENTS AND

COMMUNICATIONS BETWEEN THE PARTIES PERTAINING TO THE SUBJECT MATTER OF THIS

AGREEMENT. NO DIFFERENT OR ADDITIONAL TERMS WILL BE ENFORCEABLE AGAINST BAY

NETWORKS UNLESS BAY NETWORKS GIVES ITS EXPRESS WRITTEN CONSENT, INCLUDING AN

EXPRESS WAIVER OF THE TERMS OF THIS AGREEMENT.

117383-A Rev. A

v

Contents

About This Guide

Conventions .....................................................................................................................xiv

Acronyms ......................................................................................................................... xv

Ordering Bay Networks Publications ...............................................................................xvi

Bay Networks Customer Service .....................................................................................xvi

How to Get Help .............................................................................................................xvii

Chapter 1

Overview of the BCC Interface

Platform Requirements ...................................................................................................1-2

Conﬁgurable Objects ......................................................................................................1-2

Number of BCC Sessions ...............................................................................................1-2

Terminology and Concepts .............................................................................................1-3

Using Abbreviations and Acronyms ................................................................................1-7

Chapter 2

Learning to Use the BCC Interface

Entering and Exiting the BCC Interface ..........................................................................2-1

Using the BCC Conﬁguration Hierarchy .........................................................................2-3

Locating Conﬁgured Objects ....................................................................................2-5

Displaying Context ...................................................................................................2-6

Context-Sensitive Prompts .......................................................................................2-6

vi

117383-A Rev. A

Navigating in Conﬁguration Mode ..................................................................................2-7

Navigating with the back Command .........................................................................2-7

Navigating with Conﬁguration Commands ...............................................................2-8

Moving Back One or More Levels ......................................................................2-8

Moving Back to Root (box) Level .......................................................................2-8

Moving Forward from Root (box) Level ..............................................................2-9

Specifying a Full Path ......................................................................................2-10

Specifying a Shortened Path ...........................................................................2-10

Displaying Online Help .................................................................................................2-12

Using the BCC Help File ...............................................................................................2-25

Displaying Conﬁguration Data ......................................................................................2-26

Displaying the Total Device Conﬁguration ..............................................................2-26

Displaying the Conﬁguration of One Object ...........................................................2-28

Displaying Binary Conﬁguration Files as BCC Syntax ...........................................2-29

Chapter 3

Entering Commands

Command Input Features ...............................................................................................3-2

Using Command Abbreviations ................................................................................3-2

Recalling Commands ...............................................................................................3-2

Entering Commands from a File ..............................................................................3-3

Entering Multiple Commands per Line .....................................................................3-4

Continuing a Command Line ....................................................................................3-4

Entering Comments .................................................................................................3-6

System Commands ........................................................................................................3-6

Conﬁguration Commands ...............................................................................................3-7

Using Basic (Full) Syntax .........................................................................................3-7

Using Default Syntax ................................................................................................3-8

Using Abbreviated Syntax ........................................................................................3-9

Specifying Parameter Values .................................................................................3-10

Required, Derived, and Other Parameters ......................................................3-10

Specifying Multiple Parameter-Value Pairs ......................................................3-11

Command Operators ....................................................................................................3-11

Editing Command Lines ...............................................................................................3-13

Saving Commands on a Workstation ...........................................................................3-14

Saving the Active Conﬁguration to an NVFS Volume ...................................................3-14

117383-A Rev. A

vii

Chapter 4

Conﬁguring a Network Device

Creating and Modifying a Device Conﬁguration .............................................................4-1

Entering Conﬁguration Commands from a File ............................................................4-16

Disabling a Conﬁgured Object ......................................................................................4-17

Enabling a Conﬁgured Object .......................................................................................4-18

Deleting a Conﬁgured Object .......................................................................................4-19

Conﬁguration Command Responses ............................................................................4-20

Chapter 5

Conﬁguration Examples

Identifying Installed Link Modules ...................................................................................5-2

Conﬁguring an Ethernet Interface with IP, ARP, and RIP ................................................5-4

Conﬁguring a HSSI Port with IP .....................................................................................5-7

Conﬁguring a Token Ring Interface with IP and RIP .....................................................5-10

Conﬁguring PPP and IP on a Synchronous Interface ...................................................5-12

Conﬁguring a FDDI Interface with IP and RIP ..............................................................5-13

Conﬁguring OSPF and BGP .........................................................................................5-15

Conﬁguring Telnet, FTP, SNMP, and NTP .....................................................................5-23

Appendix A

Conﬁguration Tree

Appendix B

System Commands

Appendix C

TCL Support

Index

117383-A Rev. A

ix

Figures

Figure 1-1. The Technician Interface and the BCC Interface ......................................1-1

Figure 1-2. Conﬁguring IP and RIP on an Ethernet Interface ....................................1-5

Figure 2-1. Sample BCC Conﬁguration (AN/BN Router) ............................................2-4

Figure 2-2. Object Location or Context ......................................................................2-5

Figure 2-3. Moving Away from Root (box) Level .........................................................2-9

Figure 2-4. Specifying a Full Path ............................................................................2-10

Figure 2-5. Navigating with the BCC Backward (Recursive) Search Feature ..........2-11

Figure 2-6. Objects to Conﬁgure at the Next (Branch) Level ....................................2-23

Figure 4-1. Sample BCC Conﬁguration (BCN Router) ...............................................4-3

Figure 4-2. Typical BCC Conﬁguration Cycle .............................................................4-4

117383-A Rev. A

xi

Tables

Table 3-1. BCC Command Operators (Methods) ....................................................3-12

Table 3-2. Keystrokes for Editing BCC Command Lines .........................................3-13

Table B-1. AN/BN Router System Commands ......................................................... B-1

117383-A Rev. A

xiii

About This Guide

If you are responsible for conﬁguring and managing Bay Networks

®

AN

®

and BN

®

(BCN

®

and BLN

®

) routers, read this guide to learn how to use the

Bay Command Console (BCC™).

To use the BCC, you should have some experience supporting a multivendor

internetworking system. You should be able to perform network device

conﬁguration, maintenance, and troubleshooting.

For additional sources of information about conﬁguring AN and BN routers, see

the task map for this release.

If you want to Go to

Learn about BCC concepts and terminology Chapter

1

Learn how to perform basic BCC operations Chapter 2

Learn how to enter BCC commands Chapter 3

Learn how to use the BCC to conﬁgure an AN or BN router Chapter 4

Study examples that illustrate how to conﬁgure, navigate, get help,

and perform other system tasks on an AN or BN router

Chapter 5

Note:

Because the BCC makes real-time changes to a device conﬁguration,

Bay Networks recommends that you ﬁrst learn about BCC behavior on a

device not connected to your production network. After you become

comfortable with using the BCC, run it on a device in your production

network.

Using the Bay Command Console (AN/BN Routers)

xiv

117383-A Rev. A

Conventions

angle brackets (

< >

) Indicate a variable in a command line. The word or

words inside the angle brackets describe the type of

variable (for example,

<host-address>

). Do not type

the angle brackets when entering an actual value for a

variable.

Example: if command syntax is

ping

<ip-address>

,

enter

ping 192.32.10.12

bold text

Indicates text (usually commands) that you enter at the

BCC command line prompt.

Example: Enter

reset

.

braces ({ }) Enclose a list of

• Command keywords or conﬁguration parameter

values, one of which you can enter

• BCC instance IDs of conﬁgured objects

Example:

{arp/1.2.3.4/1 rip/1.2.3.4}

• A literal string, such as the literal value of the

console prompt

Example:

prompt {[%slot%:1]$}

(Yields a prompt such as “

[9:1]$

”.)

brackets ([ ]) Indicate command keywords, arguments, or ﬁlters not

required (taken as optional command input) by the

BCC.

ellipsis points (. . .) Repeat the last element of the command as needed.

Example:

ethernet/2/1

[

]

. . .

Translating this syntax to a speciﬁc command:

ethernet/2/1 boﬂ-retries 2 hardware-ﬁlter enabled

About This Guide

117383-A Rev. A

xv

italic text

Indicates variable values in command syntax

descriptions, new terms, ﬁle and directory names, and

book titles.

quotation marks (“ ”) Indicate a literal string in a command line, the title of a

chapter, or a section within a book.

screen text

Indicates BCC or Technician Interface output to a

console or Telnet screen, for example, prompts, system

messages, statistical data, and conﬁguration data.

vertical line (

|

) Separates choices for required or optional command

keywords and arguments. You must enter only one of

the choices available. Do not type the vertical line

when entering a command.

Example: If the command syntax is

show ip routes

|

rip

,

you enter either

show ip routes

or

show ip rip

, but not both.

Acronyms

ARP Address Resolution Protocol

BN Backbone Node

IP Internet Protocol

LAN local area network

MAC media access control

OSPF Open Shortest Path First

RIP Routing Information Protocol

SNMP Simple Network Management Protocol

TCP/IP Transmission Control Protocol/Internet Protocol

TFTP Trivial File Transfer Protocol

WAN wide area network

Using the Bay Command Console (AN/BN Routers)

xvi

117383-A Rev. A

Ordering Bay Networks Publications

To purchase additional copies of this document or other Bay Networks

publications, order by part number from Bay Networks Press

™

at the following

numbers:

• Phone--U.S./Canada: 888-422-9773

• Phone--International: 510-490-4752

• FAX--U.S./Canada and International: 510-498-2609

The Bay Networks Press catalog is available on the World Wide Web at

support.baynetworks.com/Library/GenMisc

. Bay Networks publications are

available on the World Wide Web at

support.baynetworks.com/Library/tpubs

.

Bay Networks Customer Service

You can purchase a support contract from your Bay Networks distributor or

authorized reseller, or directly from Bay Networks Services. For information

about, or to purchase a Bay Networks service contract, either call your local Bay

Networks ﬁeld sales ofﬁce or one of the following numbers:

Information about customer service is also available on the World Wide Web at

support.baynetworks.com

.

Region Telephone number Fax number

United States and

Canada

800-2LANWAN; then enter Express

Routing Code (ERC) 290, when prompted,

to purchase or renew a service contract

978-916-8880 (direct)

978-916-3514

Europe 33-4-92-96-69-66 33-4-92-96-69-96

Asia/Paciﬁc 61-2-9927-8888 61-2-9927-8899

Latin America 561-988-7661 561-988-7550

About This Guide

117383-A Rev. A

xvii

How to Get Help

If you purchased a service contract for your Bay Networks product from a

distributor or authorized reseller, contact the technical support staff for that

distributor or reseller for assistance.

If you purchased a Bay Networks service program, call one of the following Bay

Networks Technical Solutions Centers:

Technical Solutions Center Telephone number Fax number

Billerica, MA 800-2LANWAN 978-916-3514

Santa Clara, CA 800-2LANWAN 408-495-1188

Valbonne, France 33-4-92-96-69-68 33-4-92-96-69-98

Sydney, Australia 61-2-9927-8800 61-2-9927-8811

Tokyo, Japan 81-3-5402-0180 81-3-5402-0173

117383-A Rev. A

1-1

Chapter 1

Overview of the BCC Interface

The BCC is a command-line interface for conﬁguring Bay Networks devices.

After logging on to a device, you access the BCC by entering the

bcc

command at

the Technician Interface prompt (F

igure 1-1).

Figure 1-1. The Technician Interface and the BCC Interface

Technician

Interface

BCC

BCC0001B

Access

the BCC

Login

Using the Bay Command Console (AN/BN Routers)

1-2

117383-A Rev. A

From the

bcc>

prompt, you can

• Run any system command not classiﬁed as “Technician Interface only.” (See

Appendix B, “System Commands.”)

• Use conﬁguration mode to perform tasks such as creating or deleting IP

interfaces on the router. Enter BCC conﬁguration mode by entering the

conﬁg

command at the bcc> prompt.

For tasks related to device management (managing ﬁles on the router, viewing

statistics or the event log, and so on), you can enter Technician Interface

commands directly at the BCC command-line prompt. (For a complete list of

system commands, refer to Appendix B.)

Platform Requirements

The BCC software requires 8 MB of dynamic RAM (DRAM) to run on AN and

BN (BLN/BCN) router platforms. In addition, a minimum of 1.5 MB of DRAM

must be available when you start the BCC interface.

Conﬁgurable Objects

Refer to the Release Notes for Router Software 12.00 for the most up-to-date

information about what services you can conﬁgure using the BCC on AN and BN

routers. (You can also obtain this information by entering the

help tree

command

at any BCC prompt.)

Number of BCC Sessions

You can open one BCC session per slot. For the AN router (a single-slot device),

this means you can open only one BCC session at a time. For a BCN or BLN

router (a multiple-slot device), you can open multiple concurrent BCC sessions,

but with only one session active per slot.

Note:

For more information about Technician Interface commands, refer to

Using Technician Interface Software.

Page is loading ...

Avaya Bay Command Console (AN/BN Routers) User manual

Related papers

Other documents