2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. APC
  8. NBES0302

APC NBES0302, NetBotz Door Switch Sensor User manual

  • Hello! I am an AI chatbot trained to assist you with the APC NBES0302 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NetBotz
®
Door Switch Sensor for Rooms or Third-
Party Racks (NBES0302)—Installation Instructions
Inventory
Installation
Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz
products. See your NetBotz product documentation for details.
Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the
RJ-45 coupling and standard CAT-5 cabling.
Note: Use adhesive cable tie holders and tie wraps to secure the sensor cable.
Door switch sensor with
15.24-m (50-ft) cable (1)
#4 x 1/2-in screw (4) 63.5-mm (2.5-in) dual
adhesive tape (2)
203-mm (8-in) tie wrap (20)
Adhesive cable tie holder (10) RJ-45 coupling (1)
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2008 American Power Conversion. All rights reserved. All APC trademarks are property of
American Power Conversion. Other trademarks are property of their respective owners.
990-3378A
10/2008
*990-3378A*
Room door-mounting option
Rack door-mounting option
6 mm (1/4 in) or less
6 mm (1/4 in) or less
/