Knoll 2MA4561 User manual

Brand: Knoll

Model: 2MA4561

Type: User manual

Installation Instructions

Part Number: 2MA4561H01

Page 1 of 2

Side-to-Side Filing

1. Each drawer receives 2 side-to-side hanging

rails. Install the rst rail in slots closest to the

drawer front in orientation as shown. (Fig. 1)

2. Install 2nd rail in desired rear location as

needed for desired le size for side-to-side

ling in orientation shown. Note: If installing

front-to-back le bars, position 2nd rail in slots

furthest to the rear of the drawer body.

(cont…)

Calibre File Bar

10.5" File Drawers

DISASSEMBLY FOR RECYCLING

Materials Identication and Segregation:

Where possible plastic components are marked

with ASTM recycling codes. Use these codes to

identify material type for recycling. Non-marked

components should be treated as mixed plastic.

Ferrous metals can be identied using a small

magnet for recycling. Non-ferrous metals should

be separated and recycled separately.

To disassemble product, reverse the

above installation steps.

Hanging rail (2)

Front to back

2-sided rail (2)

Front to back

1-sided rail (2)

Fig. 1

Rear rail slots.

Use Appropriate

slot for desired

hanging folder size.

Front rail slot

Front hanging rail

orientation

Rear hanging rail

orientation

Part List:

Installation Instructions

Part Number: 2MA4561H01

Page 2 of 2

Calibre File Bar, continued

Front-to-Back Filing

Note: Side to side le hanging rails to be installed

rst.

3. Install front-to-back bars between side-to-side

bars (installed in steps 1 and 2). 1-sided rails

are used on left and right sides of drawer with

at edge placed ush against side of drawer

body. 2-sided rails are used in center positions.

(Fig. 2)

1-sided rail

Front to back rail orientations

1-sided rail2-sided rails

Fig. 2

Knoll 2MA4561 User manual

Knoll 2MA4561 User manual

Related papers

Other documents