2. Neutrik
  3. BDA 559 V3

Neutrik BDA 559 V3 User manual

  • Hello! I've reviewed the safety notice for the NEUTRIK powerCON TRUE1 TOP connector. This document emphasizes the importance of proper insertion and twist-locking to prevent electrical contact issues and ensure safe operation. I'm here to help answer any questions you may have about the safety guidelines for this connector.
  • What should I check on my powerCON TRUE1 TOP connector?
    What can happen if the connector is inserted incorrectly?
    How do I know if the connector is inserted correctly?
Note:
The proper twist-lock is
achieved when the silvery tab is
in the position shown in C and
an audible «click» is heard.
SAFETY NOTICE
R
A
C
click
Note:
When connecting, match the notch on
the cable connector to the
corresponding guide slot on the chassis.
Note:
After inserting properly as in
illustration , twist the
cable connector clockwise to
lock.
A
SAFETY WARNING
incorrect insertion may
cause electrical contact
misalignment resulting in
equi pmen t malfu ncti on
and/or personal injury.
BC
Page 1 of 2
®
powerCON TRUE1 TOP
max.
1 Newton
www.neutrik.com
Draft. Nr.: BDA 559 V3
Update: 2023-06-28
Neutrik AG LI-9494 Schaan
I
A brand of the Neutrik Group
Data subject to change without prior notice. 2023 NEUTRIK . NEUTRIK , powerCON are registered trademark of Neutrik AG.
® ®
©
ALL RIGHTS RESERVED.
The manufacturer of cord sets and of interconnection cord sets is responsible for the conformity assessment
according to the applicable regulatory documents.
Please regularly check the condition of your powerCON TRUE1 TOP connector system (cable connector &
chassis) for clear signs of wear and tear.
Through improper use and the excessive use of force, the encoding lugs and guide slots in the connector
system can become so severely worn or damaged that it is possible to insert the cable connector the wrong
way. However, when inserted the wrong way, the cable connector should not twist-lock into place.
A cable connector/plug connector inserted the wrong way could, in some circumstances, lead to contact
between live wires and the grounding contact in the plug socket.
To determine that the cable connector/plug connector is inserted correctly, follow the use instructions and
listen for the “click” when performing the twist-lock. Immediately unplug any connector that does not
twist-lock correctly in place.
ANote:
When connecting,
match the notch on
the cable connector
to the
corresponding
guide slot on the
plug connector.
Note:
After inserting
properly as in
illustration , twist
the cable connector
clockwise to lock.
A
BC
A
Note:
The proper twist-
lock is achieved
when the silvery
tab is in the
position shown in
C and an audibel
«click» is heard.
C
Note:
The proper twist-
lock is achieved
when the silvery
tab is in the
position shown in
C and an audibel
«click» is heard.
C
Note:
When connecting,
match the notch on
the plug connector
to the
corresponding
guide slot on the
chassis.
Note:
After inserting
properly as in
illustration , twist
the plug connector
clockwise to lock.
A
BC
Page 2 of 2
SAFETY NOTICE
R
®
powerCON TRUE1 TOP
SAFETY WARNING
incorrect insertion may
cause electrical contact
misalignment resulting in
equi pmen t malfu ncti on
and/or personal injury.
SAFETY WARNING
incorrect insertion may
cause electrical contact
misalignment resulting in
equi pmen t malfu ncti on
and/or personal injury.
max. 1 Newtonmax. 1 Newton
www.neutrik.com
Draft. Nr.: BDA 559 V3
Update: 2023-06-28
Neutrik AG LI-9494 Schaan
I
A brand of the Neutrik Group
Data subject to change without prior notice. 2023 NEUTRIK . NEUTRIK , powerCON are registered trademark of Neutrik AG.
® ®
©
ALL RIGHTS RESERVED.
The manufacturer of appliance connection cables and of further connection appliance connection cables is
responsible for the conformity assessment according to the applicable directives and standards.
/