2 Copyright ©2022 SwellPro All Rights Reserved
Thank You
Thank you for purchasing the Megaphone. We have designed and manufactured the
Megaphone to the highest quality standards.
Like any marine equipment, long-life and trouble-free operation rely on correct care and
maintenance. With proper care and maintenance, you should enjoy your drone for many
years.
It is important to familiarize yourself with the features of this product by carefully
reading this manual and particularly the priority sections indicated in the Table of
Contents.
Visit support.swellpro.com for the latest manuals, software, and tips. Refer to the
Version Information section at the end of this manual, which details additions and
corrections to this manual.
Using this Manual
This document is designed to be printed or viewed on a computer or mobile device. If
used electronically, you can search directly for terms like "Battery" to find references.
Additionally, you can click on any topic in the Table of Contents to navigate directly to
that topic.
FAQ
The user manual is the best companion while using the product. For the
specific problem using the product, the FAQ can be another great
resource for you to look at. Go to the SwellPro website, look for support >
product support > the product > FAQ to find the FAQ page.
support.swellpro.com
Copyright ©2022 SwellPro All Rights Reserved 3
Video Tutorials
Visit and subscribe to the SwellPro YouTube Channel for tutorial videos and product
information. Scan this QR code with your camera phone to go to our channel.
SwellPro Community
Join our exclusive SwellPro Community to post feedback and share your experience
with SwellPro products with other users like you.
https://support.swellpro.com/hc/en-us/community/topics
Social Media
Join our Facebook page to meet other people who share their adventures with SwellPro.
www.facebook.com/swellpro/
Register Product Warranty
Please register your product on SwellPro website as soon as possible to ensure
warranty coverage.
4 Copyright ©2022 SwellPro All Rights Reserved
Download the SDFly 2 App
Get the most from your Megaphone by flying with the SDFly 2 App. For Apple devices,
the iOS version is available for download on the AppStore. The Android version is
available for download on the Google Play Store or directly from the SwellPro website:
support.swellpro.com
There are 2 SDFly Apps, please use the SDFly 2 App for the use of the Megaphone. In order to
use the SDFly 2 App, you are REQUIRED to update the new set of firmware including flight
control, remote control, image transmission, gimbal (of your choice), camera (of your choice)
firmware. Please visit our support website, and search for “SDFly 2 App” for detailed
information.
Copyright ©2022 SwellPro All Rights Reserved 5
Content
Thank You 2
Using this Manual 2
FAQ 2
Video Tutorials 3
SwellPro Community 3
Social Media 3
Register Product Warranty 3
Download the SDFly 2 App 4
Content 5
Product Overview 7
In the Box 7
Product Diagram 8
Status Light 9
Install 10
Install Megaphone 10
Install Gimbal Camera 11
Install Payload Release 13
Use 14
Turn ON/OFF 14
Charge 14
Connect 15
Connect with SplashDrone 4 15
Standalone Use 16
Reset 17
Use 17
Speak 18
Copyright ©2022 SwellPro All Rights Reserved 7
Product Overview
In the Box
8 Copyright ©2022 SwellPro All Rights Reserved
Product Diagram
Power Button
Turn ON/OFF or reset the megaphone.
Status Light
The status light indicates the battery level, ON/OFF status, and connectivity of the
megaphone.
Adjustable Mount
Use the adjustable mount to adjust the angle of the megaphone to either 45° or 90°.
Rack
The rack is where all the components attach, including the gimbal camera.
Battery Cover
Copyright ©2022 SwellPro All Rights Reserved 9
The rubber battery cover keeps the battery from water and falling off during use. To
install or remove the battery, take off the battery cover and insert or take out the battery.
Status Light
10 Copyright ©2022 SwellPro All Rights Reserved
Install
Before you begin to install any of the accessories:
Power off the aircraft.
Remove the existing accessories.
Prepare a hex screwdriver (2.0mm).
Install Megaphone
1. Align the holes to the aircraft bottom plate. Install hex screws to the labeled holes
(A total of 7 screws).
For some older SplashDrone 4, there is no screw #2, which is fine. It doesn’t affect the
installation and use of the Megaphone. Just leave it unscrew if you can’t find it.
Copyright ©2022 SwellPro All Rights Reserved 11
2. Adjust the speaker angle. Install hex screws on each side of the speaker.
Install Gimbal Camera
1. Remove the gimble port cover.
2. Install the connector to the gimbal port.
Make sure the orange rubber ring is attached to the connector before you install it.
12 Copyright ©2022 SwellPro All Rights Reserved
3. Align the holes to the rack. Install hex screws to the labeled holes (A total of 4
screws).
Make sure the SwellPro logo is pointing toward the front of the aircraft.
Copyright ©2022 SwellPro All Rights Reserved 13
Install Payload Release
1. Remove the payload release port cover.
2. Install the connector to the payload release port on the aircraft bottom plate.
Make sure the orange rubber ring is attached to the connector before you install it.
3. Align the holes to the bottom of the battery compartment. Install hex screws to the
labeled holes (A total of 2 screws).
Make sure to disassemble the stand before installing the payload release.
14 Copyright ©2022 SwellPro All Rights Reserved
Use
Turn ON/OFF
Turn ON: Press the power button for 2 seconds.
Turn OFF: Press the power button for 2 seconds.
After turning ON the megaphone, it will take 30 seconds to start. When the status light
turns from solid green to flashing green, it’s ready to connect or use.
Charge
Connect the battery to a power outlet using the Micro USB charging cable (included)
and a 5V/2A power adapter (not included).
Copyright ©2022 SwellPro All Rights Reserved 15
Battery Status Light
Connect
Before using the Megaphone, you need to configure the Megaphone to connect to the
aircraft.
Connect with SplashDrone 4
You only need to follow the steps to configure and connect the Megaphone once. After
the first configuration, the Megaphone will connect to the SplashDrone automatically
when you turn ON both of the devices. There is no need to reconfigure them again for
your later use.
1. Turn on the aircraft, remote controller, and the Megaphone (press the power button
for 2 seconds). Wait for the remote controller to connect to the aircraft. Wait for the
Megaphone’s status light turns from solid green to flashing green quickly.
2. Connect your device to the remote controller’s WiFi SWP-xxxxxx.
3. Open SDFly 2 App. Go to Login Device > Settings (top-right) > General Settings
> Connect to Megaphone.
16 Copyright ©2022 SwellPro All Rights Reserved
4. Follow the in-App instruction to connect the Megaphone.
5. You are now ready to use the Megaphone with SDFly 2 App.
If you fail to configure and connect the Megaphone, please try to reset and follow the steps
again.
Standalone Use
Besides using it with the SplashDrone 4, the Megaphone can be used by itself as a
standalone speaker. The wireless connection range is about 25 meters.
Copyright ©2022 SwellPro All Rights Reserved 17
If you use the Megaphone as a standalone device (connect your mobile device’s WiFi directly
to the Megaphone) and you want to switch to use with SplashDrone 4, you need to follow the
steps to reconfigure and connect to the SplashDrone 4.
For standalone use
1. Turn ON the Megaphone (press the power button for 2 seconds). Wait for the
Megaphone’s status light turns from solid green to flashing green quickly.
2. Connect your mobile device to the Megaphone’s WiFi Megaphone-xxxxxx.
3. Open SDFly 2 App, and tap Login Device.
4. You are ready to use the Megaphone on the SDFly 2 App.
DLNA Casting
After connecting your mobile device to the Megaphone, you can play audio files on the
music or streaming apps using DLNA casting if the App supports it.
Reset
If you have trouble connecting the Megaphone, or you want to connect your Megaphone
to another SpalshDrone 4, you can reset the Megaphone, then proceed with the
connection.
Reset the Megaphone
1. Turn ON the Megaphone (press the power button for 2 seconds). Wait for the
Megaphone’s status light turns from solid green to flashing green quickly.
2. Press the power button 2 times. The Megaphone will reset and restart. Wait for the
Megaphone’s status light turns from solid green to flashing green quickly, and you are
ready to connect and use.
Use
After following the steps to connect Megaphone to the SplashDrone 4 or your mobile
devices, the Megaphone buttons will appear on the App’s interface.
18 Copyright ©2022 SwellPro All Rights Reserved
Speak
Tap the speak button once to speak, and tap it again to end the speak. During the
speaking, speak to your mobile device just like you normally would speak, your voice will
transmit and amplify through the Megaphone. There is no limit on how long you can
speak.
Play Audio
Tap the Megaphone Functions button , and tap the playlist button , then select
the audio file you want to play. When playing the audio, you can play/pause, play
Copyright ©2022 SwellPro All Rights Reserved 19
next/previous, and set play mode (repeat, loop, shuffle). You can either scan and import
files from your mobile device storage or record audio files to the playlist.
Record Audio
Tap the Record button to record audio. After you complete the recording and save
the file, the audio file will be stored in the playlist. There is no limit on how long you can
record on the App as long as your mobile device has enough storage.
Adjust Speaker Angle
There are 2 adjustable angles for the speaker. Each cover different directions of sound
propagation. Set the angle according to your use.
Always calibrate the aircraft compass every time you change the speaker angle.
20 Copyright ©2022 SwellPro All Rights Reserved
Page is loading ...
Page is loading ...
Page is loading ...
/
