2. VEVOR
  3. Y428BT
Y428BT

VEVOR Y428BT, Y428 User guide

  • Hello! I've reviewed the user guide for the VEVOR Y428/Y428BT Thermal Label Printer. This document covers the setup process, including power control, software installation for both Windows and Mac, label size adjustments and printer usage. I see there are instructions on how to connect to computer via USB, install the necessary software, and print labels. I'm ready to answer your questions about this device.
  • How do I power off the printer?
    Where can I download the printer driver for Mac?
    What should I do after changing label sizes?
Original instructions for Thermal Label Printer,please read all manual
1.Ensure the power is OFF(Press down“O”means Power OFF)
USB po on your computer to aviod producing unwanted
1.Double-click the le "Vevor-Mac-Driver-Latest.pkg".
ocial website https://www.vevor.com/pages/download-
center-label-printer,or nd it from the USB stick that comes
with the package.
2.Click
"
Continue
"
and follow
the on screen instructions.
3.Click
"
Close
"
to nish.
5.Power on the printer, you will see "VEVOR Y428/Y428BT" in the
list,Now you can print labels.
4.Open”System Preferences”,and click”Printers & Scanners”.
ocial website https://www.vevor.com/pages/download-
center-label-printer,or nd it from the USB stick that comes
with the package.
3.Click “Next”and “nish” to complete the driver installation.
You can also scan QRCode below to download APP.
iOS
Android
would cause printing blank.
(102mm x 152mm).Each time you change dierent label sizes,please
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/