ACTi TVW-300 Quick is a standalone TV wall server that allows you to display live video from network cameras on multiple monitors. It supports up to four monitors and can be used to create a variety of video wall configurations. The TVW-300 Quick is easy to set up and use, and it comes with a variety of features that make it a great choice for a variety of applications.
Some of the key features of the ACTi TVW-300 Quick include:
- Support for up to four monitors
- Multiple video wall configurations
- Easy to set up and use
- Variety of features
The ACTi TVW-300 Quick is a great choice for a variety of applications, including:
ACTi TVW-300 Quick is a standalone TV wall server that allows you to display live video from network cameras on multiple monitors. It supports up to four monitors and can be used to create a variety of video wall configurations. The TVW-300 Quick is easy to set up and use, and it comes with a variety of features that make it a great choice for a variety of applications.
Some of the key features of the ACTi TVW-300 Quick include:
- Support for up to four monitors
- Multiple video wall configurations
- Easy to set up and use
- Variety of features
The ACTi TVW-300 Quick is a great choice for a variety of applications, including:
Quick Installation Guide
TVW-300
4-Monitor Tower Standalone TV Wall
V.21.01.13
2 Quick Installation Guide
Thank you for purchasing ACTi Standalone TV Wall Server. This guide
contains all the information you need to quickly set up the TV Wall system via
local display interface.
For detailed instructions on installation and operation, please search for the
product manuals on http://www.acti.com/downloadcenter.
The items below are required for installation:
• HDMI / DVI / DisplayPort Monitor
• USB or PS/2 keyboard
• Network cable
This package includes the following items:
√TVWUnit √PowerCord √SocketConverters
√FrontCoverKeys
√USBMouse
√ScrewPack
UNPACK
1
BEFORE YOU START
Quick Installation Guide 3
REAR PANEL
2
1
Power Switch
2
Power Connector
3
PS/2 Connector
4
USB Ports x 2
5
HDMI Ports
6
DisplayPorts
7
DVI Ports
8
USB 3.0 Ports x 4
9
LAN Port
10
Audio Input / Output
FRONT PANEL
Audio Out and Mic In
LED Indicators
Power Button
USB 3.0 Ports x 2
3
AT A GLANCE
2
4
2
1
1
2
3
4
4
3
7
8
6
5
6
9
10
5
7
5
7
6
1
4 Quick Installation Guide
The example below displays a local network consisting of the TVW, network
cameras and basic required peripherals to start using the device.
CONNECT THE DEVICES
4
Network Switch
USB Devices
# 1
Power Source
START UP
5
NOTE: To assign a static IP address to the TV Wall server, after entering Windows operating
system,congurethenetworksettingsinWindows Network and Sharing Center.
2. On the front panel, press the POWER BUTTON
to turn on the device.
1. Turn on the the POWER SWITCH at the back
of the device.
TVW
HDMI / DVI / Display Port Monitors
# 2 (optional)# 3 (optional) # 4 (optional)
NOTE: If the video
connector of your
monitor is not
available on TVW,
use display connector
converters.
3. On Windows login screen, follow the on-screen
instructions to setup your login password.
This will be used in succeeding Windows login. It is strongly
recommended not to leave the password blank.
Quick Installation Guide 5
First thing to do is to register the TV Wall Server license either by Online
Registration or Ofine Registration.
Online Registration
Use Online Registration if the TV Wall server has Internet access.
1. Membership ID in ACTi Member Center is required for activation. If you do
not have an account yet, Register one for free at https://member.acti.com/
login.
5
REGISTER LICENSE
2. On the Windows Notications Panel, double-click the icon to bring
up the TV Wall Administrator Tool.
3. Click Register.
6 Quick Installation Guide
4. Select Online Registration.
5. Select the MAC Address then
lluptheLicense Key, ACTi
Account, and Password.
6. Click Apply to complete.
Ofine Registratioin
Use Ofine Registration if the TV Wall server is in a network but not
connected to public Internet.
Youneedtogetanactivationlefromanothercomputerandtransferittothe
TVWallserver.Butrst,takenoteoftheMACaddressofTVWallserver.
1. Membership ID in ACTi Member Center is required for activation. If you do
not have an account yet, Register one for free at https://member.acti.com/
login.
Quick Installation Guide 7
2. Access https://www2.acti.com/support/LicenseMgt/TVW_registration.asp.
3. Enter the License Key and the MAC address of TV Wall server, then click
Submit.
4. Anemailwiththeactivationcodele(*.lic)willbesenttotheregistered
emailaddress.SavethisletoaUSBDisk.
5. On the TV Wall server
Windows Notications
Panel, double-click the
icon to bring up the TV Wall
Administrator Tool.
6. Choose Ofine Registration.
Click Import and upload the
licensele(*.lic).
7. Click Apply to activate the
license.
8 Quick Installation Guide
6
START TV WALL SERVICE
After successfully registering the TV Wall Server, the status shows that the
service is RUNNING.
To start viewing monitor clients, click the Settings page tab. Then, click Start
Up.
Bring Up the Views
To manage and bring up the
views at anytime, right click
the TV Wall Server icon
from the Windows Status
Bar then click Start Up
Monitor Clients.
Quick Installation Guide 9
ADD TV WALL TO CMS SERVER
7
NOTE: Ensure the CMS server has been updated to the latest version.
1. On the CMS server, go to Setup page > TV Wall, then click Add TV Wall.
2. Input the Name of the TV Wall Server and its connection properties: Host
IP address, Port, Account and Password.
3. Click “Apply”to save this server.
The CMS server will detect the display arrangement. If you apply new display
settings on the TV Wall server later, CMS will be synchronized simulataneously.
1 3
2
10 Quick Installation Guide
8
CREATE TV WALL VIEWS
To start real-time handling of the TV Wall monitors via CMS interface, create a
view on the CMS Live View screen which will act as a deck dedicated as the TV
Wall Controller.
1. On the CMS, click on the View ToolbarandllintheView properties.
It is recommended to name this View as “TV Wall Controller” and create a
new View group.
2. Highlight this View, select a layout and click to enter the View Edit
mode.
3. On a blank channel window, click Create TV Wall Controller.
Create TV Wall Controller
a
b
c
Quick Installation Guide 11
4. As the channel window shows the TV Wall Controller background, click
to save the View.
5. Scroll the left-panel menu towards TV Wall and drag the TV Wall server
source onto the TV Wall Controller view. You may drag multiple TV wall
servers here as you want.
6. The TV Wall View appears, drag the bottom-right corner to adjust the
dimensions. Click to save this TV Wall View.
12 Quick Installation Guide
9
ASSIGN VIEWS TO MONITORS
To assign a camera device to the view, simply drag a camera channel to the
grid on the the TV Wall View. Continue to drag another camera to the view. The
TV Wall Monitor(s) will immediately display the camera views.
Or, you may select a live channel on the CMS Live view interface, right-click
“Send to TV Wall” to send the live stream of that channel to the TV wall.
Display on TV Wall Stations
Quick Installation Guide 13
MANAGE TV WALL VIEWS
10
When you click on a TV Wall source, the Controller Toolbar on top of the
window becomes enabled. Use the toolbar to manage the TV Wall Views.
View Mode: Toggle between Viewer Mode and Screen Mode.
Select TV Wall View: Use this drop-down box to select and change from one view set to
another.YouneedtocreateTVWallViewsetrst.
View Manager: Allows you to manage the TV Wall view sets, such as rename or delete.
View Patrol:Allowsyoutocreateandcongurepatrolfunctions.Whenactivated,allows
theTVWallviewstochangeinsequencefromoneviewsettoanothereveryspecied
period of time.
Create View: Click to create a new TV Wall View set.
Save View: Click to save the view.
Clear Content: Click to clear the assigned cameras to the TV Wall view.
Reset Position: Click to move the TV Wall view set to its default position and dimensions
on the CMS interface.
Playback Control: Click to display the Playback Control toolbar on the TV Wall Controller
window. Click a channel from the view to view it on playback mode. All controls like play,
pause, forward, rewind or go to schedule etc. are done on the CMS interface while the
video playback actually occurs on the TV monitors.
Right-click to change View Layout
1 2 3 4 5 6 7 8 9
1
2
3
4
5
6
7
8
9
Due to continuous product improvements, some contents may have changed
from the time this documentation was written.
You can download the latest user documentation from
http://www.acti.com/downloadcenter
.
www.acti.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
ACTi TVW-300 Quick is a standalone TV wall server that allows you to display live video from network cameras on multiple monitors. It supports up to four monitors and can be used to create a variety of video wall configurations. The TVW-300 Quick is easy to set up and use, and it comes with a variety of features that make it a great choice for a variety of applications.
Some of the key features of the ACTi TVW-300 Quick include:
- Support for up to four monitors
- Multiple video wall configurations
- Easy to set up and use
- Variety of features
The ACTi TVW-300 Quick is a great choice for a variety of applications, including:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ACTi TVW-100 Quick Installation guide
-
-
-
-
-
-
-
-
-
Other documents
-
Aritech TruVision TruVision TVW-AWB-1 Angled back box mount for wedge camera Technical Manual
-
United Digital Technologies KCM-7311 Datasheet
-
QNAP VS-12164U-RP PRO+ User manual
-
FLIR DN208P2V4 Series User manual
-
-
Digimerge DNR200 Series User manual
-
Geovision GV-Video Wall User manual
-
-
Security Tronix ST-NVR-128 Owner's manual
-
Digital Watchdog DW-V960H16 User manual
