2. Winners Only
  3. DQ1455E

Winners Only DQ1455E Assembly Instructions

  • I have reviewed the assembly instructions for the DQ1455 Backless Solid Bench. This document provides a clear parts list, hardware information, and step-by-step instructions for assembly. I'm ready to answer your questions about setting up and caring for your new bench.
  • How many people are required for assembly?
    What type of surface should be used for assembly?
    What should I avoid when polishing my furniture?
BACKLESS SOLID BENCH
DQ1455
PART NO FIGURE DESCRIPTION Q'TY
Bench Leg
PARTS LIST
4 Pcs
1 Pc
1 Pc
Hardware Bag
DQ1455-13
DQ1455-13
DQ1455-07
DQ1455-07
DQ1455-01
MADE IN MALAYSIA
PAGE 1 OF 2
Bench Top
ANR-11026A-SHN
STEP 2
Set Bench upright on its legs.
STEP 1
ASSEMBLY
Turn the Bench Top upside down on a protective
surface such as carpet or other soft material.
Place the Bench Leg to corner of Apron, then tighten the
Flat Washer, Lock Washer and JCBC Bolt using the
Allen Key provided. Repeat the same for the other
legs.
1 pc
Flat Washer
8 pcs
8 pcs Lock Washer
8 pcs
HARDWARE PARTS :
NOTE: The unit should be assembled by 2 or more people.
MADE IN MALAYSIA
PAGE 2 OF 2
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
BACKLESS SOLID BENCH
DQ1455
Allen Key
JCBC Bolt
ANR-11026A-SHN
Allen Key
JCBC Bolt
Lock Washer Flat Washer
/