2. Baxton Studio
  3. BBT5472-Maya-Sky Grey/Walnut-Bench

Baxton Studio BBT5472-Maya-Sky Grey/Walnut-Bench, BBT5472-Maya-Cream/Walnut-Bench Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT5472 bench. This document provides a clear, step-by-step guide, including a hardware and parts list. It also includes important cautions for safe assembly. I'm ready to answer any questions you might have about assembling your bench.
  • Should I fully tighten the nuts or bolts right away?
    What should I do to avoid damaging the threads?
    What tools are needed for assembly?
HARDWARE LIST (BOX : 1)
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 40mm 12 PCS
2 M6 SPRING WASHER 12 PCS
3 WOOD SCREW M4 x 38mm 8 PCS
4 WOOD DOWEL M8 x 30MM 14 PCS
5 M4 ALLEN KEY (BALL SHAPE) 1 PC
ASSEMBLY INSTRUCTIONS
STEP 1 STEP 2
1 OF 5
MODEL : BBT5472 - BENCH
D
D
4
D
4
A
A
4
C
C
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
PART LIST
ITEM DESCRIPTION BOX QTY
A BENCH 1 1 PC
B WOOD FRAME 1 1 PC
C LEG 1 4 PCS
D LEG SUPPORT WOOD 1 2 PCS
ASSEMBLY INSTRUCTIONS 2 OF 5
STEP 3 STEP 4
D
D
D
C
D
D
D1
25
Don't screw tied
CL
CR
CR
CL
FOLLOW STICKER ASSEMBLY
ASSEMBLY INSTRUCTIONS 3 OF 5
STEP 5 STEP 6
Finish step 6,
Please screw tied
the STEP 4, Bolt.
1
2
5
BB
B
C
OUTSIDEINSIDE
LEG (C) FRONT VIEW
ASSEMBLY INSTRUCTIONS 4 OF 5
STEP 7 STEP 8
A
3
ASSEMBLY INSTRUCTIONS 5 OF 5
STEP 9
/