2. MONESSEN
  3. See-Through

MONESSEN See-Through Architect Guide

  • Hello! I've reviewed the specification document for the MONESSEN Lo-Rider See-Through LSTF36-B gas firebox. This document details the firebox dimensions, framing requirements, and viewing area. I'm ready to answer your questions about this product.
  • What is the actual front width of the firebox?
    What is the viewing area of the firebox?
    What is the framing height of the firebox?
Specifications
Additional information can be found online at www.monessenhearth.com
Please consult the manufacturer’s
installation manual for all details and
requirements before making a final
design layout decision.
Lo-Rider See-Through
Vent Free Gas Firebox
Lo-Rider See-Through LSTF36-B
MODEL FRONT WIDTH HEIGHT DEPTH VIEWING AREA
LSTF36-B Actual Framing Actual Framing Actual Framing 36" x 30-3/4"
45" 46" 37-1/4" 37-1/2" 24" 23"
ACTUAL
FRAMING
45“
42“*
18-3/4“
24“
Top
42“
30-3/4“
1-1/4“
5-1/4“
3“
3“ 36“ 3“
37-1/4“
Front
12“12“
2-3/8“
8-3/8“
3-1/4“
8-3/4“
Left
Right
*NOTE: When centering rebox on a wall, use this measurement. 23”
37-1/2”
42-1/2”
46”
Specifications
MON/LSTF36-B_0518
(877) 863-4350 | monessenhearth.com
Lo-Rider See-Through LSTF36-B
CLEARANCES AND HEIGHT REQUIREMENTS
33½"
19"
27¾"
2½”
Finish Wall
Combustible
Material Area
45°
1”
3”
5”
6”
Fireplace
Hood
Top View
1½”
3½”
4½”
MINIMUM HEARTH DIMENSIONS
MANTEL LEG CLEARANCES
42"
Minimum
6"
Minimum
6"
Minimum
12”
10”
8”
6”
12”
14”
15½”
16¾”
18”
Combustible
Material Can
Contact Top
of Fireplace
Noncombustible Material
Only if Needed to Cover
Radiant Top Face
MANTEL CLEARANCES
PRODUCT LISTING CODES
US ANSI Z223.1 / NFPA54
ANSI Z21.11
CSA Design Certified
Additional information can be found online at www.monessenhearth.com
Product information provided is not
complete and is subject to change
without notice. Product installation
must adhere strictly to instructions
accompanying product to avoid risk
of fire and potential injury.
36”
(914 mm)
/