Andersen 400 Series - Gliding - 0004356 Operating instructions

Brand: Andersen

Model: 400 Series - Gliding - 0004356

Type: Operating instructions

Andersen® Perma-Shield® Gliding Windows

Full Insect Screen

Weight of window and door unit(s)

and accessories will vary. Use a

reasonable number of people with

sufficient strength to lift, carry,

and install window and door

unit(s) and accessories. Always

use appropriate lifting techniques.

Congratulations! You have just purchased one of the many fine Andersen products. For ease of installation and

continued enjoyment of your Andersen product, please read and follow this Instruction Guide completely. If

your abilities do not match this procedure's requirements contact an experienced contractor. You may direct

any questions about this or other products to your local Andersen dealer. Andersen dealers can be found in the

Yellow Pages under Windows. Thank you for choosing Andersen.

Proper assembly, installation and maintenance of Andersen products is essential if the benefits of experienced

product design and engineering, quality materials, and skilled workmanship are to be fully attained. Every

assembly and installation is different (windloads, structural support, etc.) and, Andersen strongly recommends

consultation with an Andersen supplier or an experienced contractor, architect, or structural engineer prior to the

assembly and installation of any Andersen product. Assembly and installation of Andersen products is the sole

responsibility of the architect, building owner, contractor and/or consumer and Andersen has no responsibility in

this regard.

Full Insect Screen

for Andersen® Gliding Windows

INSTALLER: Please leave this guide with the building owner to file for future reference.

Use of ladders and/or scaffolding and

working at elevated levels may be

hazardous. Follow equipment

manufacturer's instructions for safe

operation. Use extreme caution when

working around window and door

openings. Personal injury and/or falls

could occur.

Improper use of hand or

power tools could result in

personal injury and/or product

damage. Follow equipment

manufacturer's instructions

for safe operation. Always

wear safety glasses.

Important Safety, Assembly, and Installation Information

Insect screen will not

stop child from falling out

window. Keep child away

from open window.

Passive Side

Insect Screen Panel

Astragal Lever

Parts Included

(1) Active Side

Insect Screen Panel

(1) Passive Side

Insect Screen Panel

Installation

Tools Required

None

Active Side

Insect Screen Panel

(with Astragal Lever)

Instruction Guide 0004356 Revised 12/27/99

! !

Andersen® Perma-Shield® Gliding Windows Full Insect Screen

1. Install Passive Side Insect Screen Panel

2. Install Active Side Insect Screen Panel

• Open window unit and slide the active window panel

all the way to the left.

• Locate

Passive Side Insect Screen Panel

(without

Astragal

and

Astragal Lever

• Grasp insect screen handle at the bottom of the insect

screen and insert top of insect screen into insect

screen track. Pull in at bottom of insect screen and lift

up slightly placing insect screen into bottom track.

• Slide insect screen all the way to the left making sure

insect screen panel fits into channel on side jamb of

window.

• Locate active side insect screen panel (with astragal

and astragal lever). Install into insect screen track

using same procedure as described in Step 1.

NOTICE

Insect screen is installed from the interior side

of the window.

3. Flip Astragal Lever

• Flip

Astragal Lever

down to tighten insect screens

against side jambs.

Passive Side

Insect Screen Panel

Slide Into Side

Jamb Channel

Active Side

Insect Screen Panel

(with Astragal Lever)

Astragal Lever

Viewed From Exterior

Andersen 400 Series - Gliding - 0004356 Operating instructions

Andersen 400 Series - Gliding - 0004356 Operating instructions

Andersen 400 Series - Gliding - 0004356 Operating instructions

Related papers

Other documents