ShockLink
User Guide
www.laerdal.com
Front page example
T R A I N I N G
T R A I N I N G
Intended Use
2
Items Included
3
Items included example
T R A I N I N G
T R A I N I N G
ShockLink
User Guide
www.laerdal.com
Front page example
T R A I N I N G
T R A I N I N G
ShockLink
Important Product Information
EN
www.laerdal.com
FR
DE
JA
ZH
KO
ShockLink enables the connection of compatible live defibrillators to ShockLink prepared
training manikins and Patient Simulators, creating more realistic Basic Life Support (BLS)
and Advanced Cardiac Life Support (ACLS) defibrillation training.
Connect ShockLink to training pads and a compatible defibrillator to begin training.
The shock energy from a defibrillator is defused in the ShockLink cable.
ShockLink removes the need for specialised defibrillator training manikins and Patient
Simulators with chest-studs or a load box to absorb the shock.
Visit www.laerdal.com/ShockLink for more information about ShockLink,
ShockLink Technology and for Spare Parts and Accessories. ShockLink
1 x AAA battery
Pouch
Remote Control ShockLink
Training Pads
User Guide Important Product
Information
Overview - ShockLink Overview - Remote Control
45
2 min
Overview example
=
==
=
Pad Connector
Correct Pad
Placement
Bluetooth
Enabled
ON
Flashing
Defibrillator
Connector
Battery Lid
Note
Laerdal LINK Technology detects correct pad placement automatically.
Note
For more information regarding compatibility with defibrillators other than a Philips defibrillator,
visit www.laerdal.com/ShockLink.
Override Pad Placement: Pads OFFOverride Pad Placement: Pads ON
Activate
Pads Placement
Indication
Select ECG
CPR Artefact
Steady
Low Battery
Setup Setup
67
T R A I N I N G
T R A I N I N G
Illustration sequence example
1
2
3
4
T R A I N I N G
T R A I N I N G
Note
ShockLink is automatically turned on when the defibrillator is turned on.
5
6
T R A I N I N G
T R A I N I N G
ON
Correct Pad Placement
Low Battery
Bluetooth Enabled
Notes
• To reset the ShockLink device, remove the battery and reinsert after 5 seconds.
• Remove training pads immediately after use to prevent adhesive residue on the manikin
chest skin.
Setup - Compatibility
8
Illustration details
Setup - Compatibility
9
LLEAP
(SimPad PLUS)
LLEAP
(Laerdal Learning Application for PC)
** ShockLink Enabled Simulator
ShockLink
Remote Control
SkillReporter
(SimPad/SimPad PLUS)*
ShockLink
(Mobile App)
** ShockLink Enabled Manikin
Infra Red
WiFi
Bluetooth
* SkillReporter communicates with ShockLink via the manikin after correct pad
placement has been detected.
** Visit www.laerdal.com/ShockLink for compatible Manikins and Simulators.
Select one of the following control options:
20-09355 Rev B
© 2016 Laerdal Medical AS. All rights reserved.
Manufacturer: Laerdal Medical AS
P.O. Box 377
Tanke Svilandsgate 30, 4002 Stavanger, Norway
T: (+47) 51 51 17 00
Printed in China
www.laerdal.com
/
