Siemens DB-11 User manual

DB-11
Siemens
Brand
Siemens
Model
DB-11
Type
User manual

This manual is also suitable for

P/N 315-095509-3
Installation Instructions
MODEL LK-11
DB-11 Base Detector Lock
INSTALLATION PROCEDURE
1. Use the hex tool provided with the SIEMENS Model
LK-11 to install the set screw into the hole in the
cover of the detector. (Refer to Figure 1.)
2. To lock the detector in the DB-11 base, rotate the
hex tool clockwise until the set screw is flush with
the detector cover flange and the top of the screw
extends into the DB-11 base locking hole, as
shown in Figure 2.
REMOVAL PROCEDURE
1. To unlock the detector in the DB-11 base, use the
hex tool provided to rotate the set screw counter-
clockwise until it no longer extends into the
detector base and backs out approximately 1/4
inch from the detector cover flange. (Refer to
Figure 3.)
2. Remove the detector.
Figure 1
Installing the Set Screw
Figure 2
Set Screw in Locked Position
Figure 3
Removing the Set Screw
Fire Safety
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
firealarmresources.com
  • Page 1 1

Siemens DB-11 User manual

DB-11
Siemens
Brand
Siemens
Model
DB-11
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents