Childcare lullabye 036140M-267 User manual

Childcare
Brand
Childcare
Model
lullabye 036140M-267
Category
Baby furniture
Type
User manual
IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Lullabye
BASSINET “LAMB”
#036140M-267
2
Read all instructions before assembly and use of the bassinet. Keep
instructions for future use.
FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS
INJURY OR DEATH.
FALL HAZARD - TO PREVENT FALLS;
• DO NOT USE THIS PRODUCT WHEN INFANT BEGINS TO PUSH UP ON HANDS AND KNEES
OR HAS REACHED MANUFACTURER’S MAXIMUM WEIGHT OF 8 KGS, WHICHEVER
COMES FIRST.
SUFFOCATION HAZARD - INFANTS HAVE SUFFOCATED;
• IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET /CRADLE, AND ON SOFT
BEDDING.
• NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING.
• USE ONLY THE PAD PROVIDED BY MANUFACTURER.
SAFETY PRECAUTIONS
WARNING
If sheet is used with the pad, use only the one provided by the bassinet manufacturer or one specically designed to t he bassinet.
To reduce the risk of Sudden Infant Death Syndrome (SIDS), paediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
Use bassinet with only child at a time.
ALWAYS attach all provided fasteners (strings, straps, clamps etc...) tightly to the bassinet according to the instructions. Check frequently.
Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacier cords. Do not
suspend strings over a bassinet or attach strings to toys.
DO NOT leave child unattended in the bassinet.
ALWAYS make sure the wheels or stands are in the locked “down” position.
NEVER place bassinet near a window where cords from curtains can strangle a child.
Adult assembly is required.
Remove any tools or excess parts including plastic packaging from the bassinet vicinity after its assembly.
Discontinue use of the bassinet before the infant can sit up by themselves.
Padding and cushioning materials, including the mattress are to be sufciently rm to preclude conforming to the contours of the infants
face.
Ensure proper ventilation is maintained in and around the bassinet by limiting bed clothes, extra pillows or toys.
Ensure the bassinet is placed at a reasonable distance from curtains, blinds, heaters and power points.
Ribbons or lace associated with the bedding may entangle the infant.
Promptly replace worn out or broken parts. T
The need to keep medication, string, elastic, small toys or small items such as money out of reach from any position in the rocking cradle.
RECOMMENDED MATTRESS SIZE (SUPPLIED)
This bassinet has been manufactured for use with a mattress which measures 410mm wide x 775mm long and 22mm in thickness. The
width and length are specied because it is important that the gaps between the mattress and the sides and ends of the bassinet will not
exceed 40mm. This is to minimise the risk of a child’s limb becoming caught in the gap.
3
Due to variations in the style and design of our products, the photographs and illustrations shown in this
instruction manual are generic, therefore product fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specications without notice as a result of our ongoing
policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Lullabye Bassinet
Congratulations on your purchase of the Lullabye
Bassinet “Lamb”
This product has been designed and developed with safety,
comfort and functionality in mind. Please take the time to read
this manual carefully before using this product and keep it in a
safe place for future reference.
CONGRATULATIONS
4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please contact
Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Main Frame
(DO NOT
REMOVE FOAM)
Canopy
x 1
x 1
x 1 x 4
x 1
x 1
x 2
x 1
Mattress Support
Board
50mm screw,
nylon lock nut
and washer
Bassinet Liner
Mattress Pad
(with tted sheet)
U Frame
Base Frame
There are no accessories recommended for us with this Childcare Lullabye Bassinet.
5
ASSEMBLY CONTENTS
Tools Required:
Philips head
screw driver
x 1
x 1Spanner
Supplied loose in box continued:
Basket x 1
x 4Castors
6
ASSEMBLY / OPERATING INSTRUCTIONS
To insert Castors...
To attach Basket...
1
1
2
Insert all four castors into the ends of the base frame
tubes.
Slide support rod through ends of basket as shown.
Insert support rod into one side of base frame.
Push base frame leg away from support rod to insert
rod into other side of base frame.
Repeat for other support rod.
1a.
1a.
2a.
2b.
2c.
7
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Bassinet Frame...
1
2
3
4
5
Unfold the base frame as shown.
Place the U frame on top of the base frame, aligning
the vertical support rods with the holes in base frame.
Ensure that the push pins are facing towards the
centre of the bassinet.
Then place the mattress support board, so that the
holes in support board align with the holes in the base
and U frames.
Ensure the press studs on the mattress support board
are facing downwards.
Place the rst washer on top of one of the holes in the
mattress support board
Insert the screw through the washer, mattress support
board, U frame and base frame.
Using the screwdriver and spanner, secure with a nylon
lock nut underneath the base frame as shown.
Repeat for other side to form the assembly shown right.
Insert the main frame onto the U frame support pillars
to complete the fram assembly.
The push pins on the support should automatically
click into position.
1a.
2a.
2b.
2c.
3a.
3b.
3c.
4a.
5a.
5b.
PLEASE NOTE! You may need the help of another adult.
8
ASSEMBLY / OPERATING INSTRUCTIONS
To attach Bassinet Liner...
1
2
3
4
Place the bassinet liner onto the main frame.
Stretch the pockets on the bottom of the bassinet liner
around the ends of the mattress support board.
Lift the bottom skirt of the bassinet liner into the
bassinet and attach the eight press studs around the
top of the main frame.
Attach the four press studs on the bottom of the
bassinet liner to the bottom of the mattress support
board.
1a.
2a.
3a.
4a.
9
ASSEMBLY / OPERATING INSTRUCTIONS
To insert Mattress Pad...
To attach Canopy...
1
1
2
3
Insert the mattress pad with the tted sheet onto the
bassinet liner.
Position the canopy over the top end of the bassinet
with the warning label.
Push the canopy ratchets onto the frame on both
sides of the bassinet.
Attach the Velcro on each canopy ap to the side of
the bassinet liner.
Attach the velcro strips on the rear of canopy liner
edge to the velcro strips on the rear outer edge of
bassinet top rail liner.
1a.
1a.
1b.
2a.
3a.
The bassinet is now ready for use.
10
HOW TO CARE FOR YOUR CHILDCARE BASSINET
Cleaning
Maintenance
To ensure the long-lasting use of your bassinet, dry it with a soft
absorbent cloth after use. Use a damp cloth to clean the frame. Do
not use abrasive cleaners. Allow it dry completely before folding or
storing it away. Do not dry clean, or use bleach on fabrics or trims. Do
not machine wash, tumble or spin dry, unless the care labelling on
the product permits these methods.
Check bassinet regularly to ensure that locking devices and
components are secure and working properly. Always check parts
regularly for tightness of screws, nuts and other fasteners – tighten
or replace if required. To maintain the safety of your bassinet, seek
prompt repairs for bent, torn,worn or broken parts. Use only those
parts and accessories approved by CNP Brands.
If you have any difculties in assembling the bassinet, please contact
our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand
contact Wainhouse Distribution on 0800 567 5000.
11
ABOUT US
About CNP Brands
Currently, CNP Brands boasts one of the most diverse brand portfolios
with a combination of company owned brands and distribution
agreements. These include distribution lines for 4moms, Brica, Cybex,
Eveno, Good Baby, Lascal, Maclaren, Motorola, Munchkin and
OiOi.
Our own brands, including Childcare, have gone from strength to
strength in recent years. Childcare, and our premium brand bebe
care, demonstrate our commitment to quality and continuing
investment in product development.
Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut, VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: info@cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected].nz
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Childcare lullabye 036140M-267 User manual

Childcare
Brand
Childcare
Model
lullabye 036140M-267
Category
Baby furniture
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents