Alcatel-Lucent OmniPCX Office 4019 User manual

OmniPCX Office 4019
Alcatel-Lucent
Brand
Alcatel-Lucent
Model
OmniPCX Office 4019
Category
IP phones
Type
User manual

This manual is also suitable for

1300 133 996 www.evotec.com.au
4018 / 4019 User guide
1. Customising your terminal
Modifying your personal code
1. Using the Up-down navigator, navigate to
Settings
2. Press OK
, then scroll to Options
3. Press OK
, then scroll to Password
4. Follow the spoken instructions to change your
password
5. To return to home page, a long press on the
Back/Exit
key is required
Lock/unlock your telephone
1. Using the Up-down navigator, navigate to Lock
2. Press OK
3. Depending on the displayed information, enter
either your password or confirm (default is
1515)
Identifying the terminal you are on
1. Using the Up-down navigator, navigate to Who
am I
2. Press OK
, and the system will display your
telephone number
3. To return to home page, a long press on the
Back/Exit
key is required
Adjusting the audio functions
1. Using the Up-down navigator, navigate to
Settings
2. Press OK
, then scroll to Phone
3. Press OK
, then scroll to Ringing
4. Press OK
to adjust Melody, and use the Up-
down navigator
5. To select desired melody. Confirm your selection
with OK.
OR
1. Scroll to Volume
, press OK, and use the Up-
down navigator to select desired volume.
Confirm your selection with OK
.
2. To return to home page, a long press on
Back/Exit
key is required
Adjusting screen brightness
1. Using the Up-down navigator, navigate to
Settings
2. Press OK
, then scroll to Phone
3. Press OK
, then scroll to Contrast
4. Using the Up-down navigator
, adjust the contrast
5. To return to home page, a long press on
Back/Exit
key is required
2. Basic Functions
Making a call
Choose the method to suit:
A) Lift the receiver; or
B) Press the Handsfree
button; or
B) Press the programmed line key; or
C) Dial the number for your call
Note - to make an external call, dial 0 before dialling
the telephone number
AUDIO KEYS
Hang-up key: to terminate a call.
Hands-free/Loudspeaker Key: to make or answer a call
without lifting the receiver (Alcatel 4018).
Intercom/Mute key: press during a conversation so that
your correspondent can no longer hear you
Terminal idle: press to answer calls automatically
without picking up the receiver.
Plus and Minus keys: To adjust the loudspeaker or
handset volume
FUNCTION KEYS
Messaging key: if the key flashes, a new voice or text
message has been received.
"Redial" key: to access the "Redial" function.
NAVIGATION
Up-down: use to navigate in the home page for
Information on the status of the set, date and time, set
programming and configuration functions.
OK key: used to validate your choices and options
Back/Exit key: to return to previous menu (short press)
or return to first screen (long press). You can also use
t
his ke
y
to correct a character
y
ou entered.
Ke
yp
ad
Audio Keys &
Function Keys
Navi
g
ation
1300 133 996 www.evotec.com.au
Receiving a call
Choose the method to suit:
A) Lift the receiver; or
B) Press the Handsfree
button; or
C) Press the key adjacent to the button programmed
for incoming calls
Transferring a call
1. Caller rings in, and is answered
2. Dial the extension number or 0 followed by the
external number
3. Use the Up-down navigator
to scroll to Transfer
4. Either announce the call, or simply transfer and
the call will ring
5. through on the transferred number
Redialling
Press the Redial button
Group Pickup
Dial * 6 to pickup another call from within the group
Direct Call Pickup
Dial # 6 followed by the extension number
Checking voicemail
If the Voicemail key flashes orange, a new voice
message or new text message has been received
1. Press the Voicemail
key
2. Using the Up-down navigator
, scroll to Voice or
Text
3. Press OK
3. Diverting your calls
Diverting your calls to another number
1. Using the Up-down navigator, scroll to Forward
2. Press OK
3. Press OK
to confirm Immediate
4. Dial the destination number
5. Press OK if the programming is not
automatically recorded
Diverting calls to your voicemail
1. Using the Up-down navigator, scroll to Forward
2. Press OK
3. Using the Up-down navigator
, scroll to
Immediate-->VM
4. Press OK
if the programming is not
automatically recorded
Cancel all diversions
1. Using the Up-down navigator, scroll to Forward
2. Press OK
3. Using the Up-down navigator
, scroll to Cancel
fwd.
4. During a conversation
Calling a second person during a call
While on a call, dial the number of the second party.
The first caller is automatically placed on hold.
Three-way conference
While the first party is on the line:
1. Dial the second caller. The first caller will be
placed on hold.
2. Use the Up-down navigator
to scroll to
Conference
3. Press OK
4. Press the Release
key to hang up on all
correspondents
5. Directory
Using call by name
1. Long press the Phone book key
2. Enter the first letter of the name
3. Using the Up-down navigator
, scroll through the
names
4. Make the call by pressing OK
Programming the keys in the personal phone
book
1. Press and release the Phone book key
2. Use the Up-down navigator
to select a key to
programme (numbers 0 to 9)
3. Press the Guide
key
4. Press OK
5. Follow the onscreen instructions
Calling via the programmed keys in the
personal phone book
6. Press and release the Phone book key
7. Press the programmed key directly (0 to 9)
OR
8. Use the Up-down navigator
to select the
contact to call
9. Press OK
to start the call
Placing a call on hold
1. Press and Park key
2. To retrieve a parked call press the Parked
key
  • Page 1 1
  • Page 2 2

Alcatel-Lucent OmniPCX Office 4019 User manual

OmniPCX Office 4019
Alcatel-Lucent
Brand
Alcatel-Lucent
Model
OmniPCX Office 4019
Category
IP phones
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents