2. Atlona
  3. AT-HDVS-TX-WP-NB

Atlona AT-HDVS-TX-WP-NB Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Atlona AT-HDVS-TX-WP-NB Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
AT-HDVS-TX-WP-NB
The AT-HDVS-TX-WP-NB is a no-button face plate for US HDVS and HDVS-150 wall plate modules.
Note: HDVS and HDVS-150 purchased separately.
Once the screws are removed, pull the face plate off the back box. (see
below)
Remove the screws from the HDMI and VGA
ports before removing the faceplate.
NB
Use a set of pliers to grab hold of the buttons, turn them slightly to
the left as they are pulled off.
Once the buttons are removed, place the AT-HDVS-TX-WP-NB on the front of the HDVS wall plate and replace the
screws. Installation is complete and the HDVS is ready to be used again.
/