Dakota Digital RLC-40F Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Dakota Digital RLC-40F Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Manual # 650698
RLC-40F
Dakota Digital RLC Clock Installation
For 1940 Ford Car
Your new RLC-40F kit includes:
Installation
4X 5/8” length Screws
Harness
Installation Manual
RLC Clock
1. Remove the four screws holding the clock to the glove box on the back side.
Manual # 650698
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
4. Connect the clock harness to the back of the clock. Route the other end of the harness to
the RTX control box and refer to the Operation Manual to complete the clock setup.
2. Remove the clock assembly and rear housing.
/