SERVICE MANUAL 1999
HOUSEHOLD PRODUCTS
11/30/2000
CLASSIC BEEHIVE BLENDER
1999
X PART NO.
4093-8 (OLD 5000-08) X
4094 (OLD 5000-25) X
BASIC PARTS
X
120V., 400W., 60HZ.
1 2 3 4 5
KEY # DESCRIPTION PART # QUANTITY REQ'D
1** CONTAINER - GLASS STYLE A *** 1
1** CONTAINER - GLASS STYLE G *** 1
11 CORD & PLUG ASSY. 088272-002-000 1
24 SWITCH - TOGGLE - ON/OFF PULSE M36967-000-000 1
24 SWITCH - 4 POS. ROTARY** M77339-000-000 1
** KNOB - ROTARY - BLACK M83774-002-000 1
25 NUT - SWITCH 013818-000-000 1
27 NAMEPLATE 030663-000-000 1
27 NAMEPLATE M89003-000-000 1
44 PROCESSING UNIT - INCL #45 015126-000-000 1
45 SEAL RING - NEOPRENE 083422-040-000 1
46 CONTAINER BOTTOM - BLACK 015132-020-090 1
47 CONTAINER HOLDER M85605-000-000 1
48 STUD DRIVE 026247-000-000 1
48 SLINGER 025729-002-000 1
51 BASE - CHROME PLATED - METAL 101793-001-000 1
51 BASE - CHROME PLATED - METAL 101793-002-000 1
53 SCREW - #10-16 x 3/4" 014330-000-000 2
54 COUPLING 026921-001-000 1
55** MOTOR 101637-042-000 1
56** BRACKET ASSAY MOTOR 027878-000-000
81 BASE COVER - METAL 101791-000-000 1
82 BUMPER - FEET - 11/16" M92619-000-000 4
83 SCREW - #8-32 x 5/8" 101801-000-000 4
84** STRAIN RELIEF 102117-000-000 1
101 FUSE ASSY. 028581-000-000 1
101 FUSE ASSY. M36926-001-000 1
** INST. BOOK M35936-000-000 1
** INST. BOOK M90373-000-000 1
*PLEASE SEE NOTES REGARDING MOTOR REPLACEMENT
** NOT SHOWN ON DRAWING
*** (A,G) SEE OLD STYLE BLENDER JARS
CORD
-TAPE
II-
CORD
LEAD
-T-l \
Q-54
In order to replace the motor you need to verify your blender base. If you have a blender base
type S (M9811 I), You need to used either the old motor bracket that is in your previous motor
or use the # 56 (027878-000-000) to install the new motor.
Type
“S”
-
(M98111-000-000)
(M98111-001-000)
Current Base
-
101793-001-000
101793-002-000
/
