Casio 2400 User manual

Category
Digital pianos
Type
User manual

This manual is also suitable for

EN/ES
CTK2400-ES-1A
GUÍA DEL USUARIO
Guarde toda información para tener como referencia futura.
Precauciones de seguridad
Antes de intentar usar el teclado digital, asegúrese de
leer las “Precauciones de seguridad” separadas.
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the Digital Keyboard, be sure to
read the separate “Safety Precautions”.
CTK
-
2090
CTK
-2400
EnglishEspañol
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
MA1402-A Printed in China
K
CTK2400_A5_x1a_EN_ES.indd 1 2014/02/10 19:12:48
Function Transmitted Recognized Remarks
Basic
Channel
1
1 - 16
1 - 16
1 - 16
Default
Changed
Note
Number
0 - 127
0 - 127
*
1
36 - 96
True voice
Program
Change
:True #
After
Touch
Control
Change
X
X
X
O
Pitch Bender
OX
System Exclusive
O
*
2
O
*
2
Key’s
Ch’s
Velocity
O
9nH v = 1 - 127
X
9nH v = 0, 8nH v =
**
O
9nH v = 100
X
9nH v = 0
Note ON
Note OFF
Mode
Mode 3
X
Mode 3
X
Default
Messages
Altered
System
Common
X
X
X
X
X
X
: Song Pos
: Song Sel
: Tune
Aux
Messages
Remarks
X
O
X
O
X
X
O
O
X
O
O
X
: All sound off
: Reset all controller
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
System
Real Time
O
O
X
X
: Clock
: Commands
0, 32
1
6, 38
7
10
11
64
66
67
91
100, 101
Bank select
Modulation
Data entry
Volume
Pan
Expression
Hold 1
Sostenuto
Soft pedal
Reverb send
RPN LSB, MSB
Models: CTK-2090/CTK-2400 Version : 1.0
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
O
X
X
O
O
X
O
O
O
X
X
*
3
*
3
*
3
O
O
O
O
O
O
O
O
O
O
O
(MSB only)
*
2
*
2
O
0 - 127
O
0 - 127
Important!
Please note the following important information before using this product.
Before using the optional AD-E95100L Adaptor to power the unit, be sure to check the AC Adaptor for any damage first.
Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC
adaptor that is seriously damaged.
Never attempt to recharge batteries.
Do not use rechargeable batteries.
Never mix old batteries with new ones.
Use recommended batteries or equivalent types.
Always make sure that positive (+) and negative (–) poles are facing correctly as indicated near the battery compartment.
Replace batteries as soon as possible after any sign they are getting weak.
Do not short-circuit the battery terminals.
The product is not intended for children under 3 years.
Use only CASIO AD-E95100L adaptor.
The AC adaptor is not a toy.
Be sure to disconnect the AC adaptor before cleaning the product.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Declaration of Conformity
Model Number: CTK-2090/CTK-2400
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This mark applies in EU countries only.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE
USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
The contents of this manual are subject to change without notice.
The actual appearance of the product may be different from that shown in the illustrations in this User’s Guide.
Company and product names used in this manual may be registered trademarks of others.
*1: Depends on tone.
*
2: For details about NRPN, RPN, and system
exclusive messages, see MIDI
Implementation at
http://world.casio.com/
.
*
3: In accordance with pedal effect setting.
*1: Depende del tono.
*
2: Para obtener información acerca de NRPN,
RPN y los mensajes exclusivos del sistema,
consulte Implementación MIDI en
http://world.casio.com/
.
*
3: De acuerdo con el ajuste de efecto de pedal.
CTK2400_A5_x1a_EN_ES.indd 2 2014/02/10 19:12:49
English
EN-1
Contents
General Guide ...........................EN-2
Using the 10-key Pad (
bp
)...................................EN-4
Using the FUNCTION Button (
3
).......................EN-4
Getting Ready to Play ..............EN-5
Preparing the Music Stand ...................................EN-5
Power Supply .......................................................EN-5
Playing the Digital Keyboard...EN-6
Turning on Power and Playing .............................EN-6
Using Headphones...............................................EN-6
Using the Metronome ...........................................EN-7
Controlling the
Keyboard Sounds .....................EN-8
Select from a variety of musical
instrument sounds ................................................EN-8
Using Reverb........................................................EN-9
Using a Pedal .......................................................EN-9
Changing the Pitch (Transpose, Tuning)............EN-10
Sampling a Sound and
Playing it on the Keyboard
(Sampling) ...............................EN-11
Playing the SAMPLING DEMO ..........................EN-11
Sampling a Sound and Playing It .......................EN-11
Sounding Sampled Sounds ................................EN-13
Applying an Effect to a Sound Sample...............EN-14
Using a Sampled Sound in a Rhythm
(VOICE PERCUSSION) .....................................EN-15
Starting a Sampling Operation Manually............EN-15
Deleting Sampled Data.......................................EN-15
Enabling or Disabling the Sampling Play Back...EN-16
Enabling or Disabling Auto Incrementing
during Short Sampling........................................EN-16
Playing Built-in Songs........... EN-17
Playing the Demo Songs....................................EN-17
Playing Back a Particular Song ..........................EN-17
Using Built-in Songs to
Master Keyboard Play ........... EN-21
Phrases ..............................................................EN-21
Step Up Lesson Flow .........................................EN-21
Selecting the Song, Phrase,
and Part You Want to Practice ...........................EN-22
Lessons 1, 2, and 3 ............................................EN-23
Lesson Settings ..................................................EN-24
Using Auto Step Up Lesson ...............................EN-25
Using Auto
Accompaniment ..................... EN-27
Playing the Rhythm Part only .............................EN-27
Playing All Parts .................................................EN-28
Using Auto Accompaniment Effectively..............EN-30
Using One-Touch Preset....................................EN-31
Connecting External
Devices ................................... EN-32
Connecting a Computer......................................EN-32
MIDI Settings......................................................EN-33
Connecting to Audio Equipment.........................EN-35
Reference................................ EN-36
Troubleshooting..................................................EN-36
Specifications .....................................................EN-38
Operating Precautions........................................EN-39
Song List.............................................................EN-40
Fingering Guide ..................................................EN-41
Chord Example List ............................................EN-42
MIDI Implementation Chart
Included Accessories
Music Stand
Song Book
Leaflets
Safety Precautions
Appendix
Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
Separately Available Accessories
You can get information about accessories that
are separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/
CTK2400_A5_x1a_EN_ES.indd 3 2014/02/10 19:12:49
EN-2
General Guide
In this manual, the term “Digital Keyboard” refers to the CTK-2090/CTK-2400.
Illustrations in this User’s Guide show the CTK-2400.
In this manual, buttons and other controllers are identified using the numbers shown below.
bm bp
5
bnbo
cm cn co cqcp cr cs cm
bq br bs bt ck cl
1 2 34
6789bk bl
ct dk
CTK2400_A5_x1a_EN_ES.indd 4 2014/02/10 19:12:49
English
General Guide
EN-3
The following explains the meaning of the $ symbol that appears on the product console and with the key names below.
$ : Indicates a function that is enabled by holding down the button for some time.
1
P(POWER) button EN-6
2
VOLUME slider EN-6
3
FUNCTION button EN-4
4
METRONOME, $ BEAT button EN-7
5
TEMPO buttons EN-7, 19, 31
6
REPEAT, INTRO button EN-18, 30
7
REW, NORMAL/FILL-IN button EN-18, 30
8
FF, VAR./FILL-IN button EN-18, 30
9
PAUSE, SYNCHRO/ENDING button EN-18, 30
bk
PLAY/STOP, START/STOP button EN-11, 17, 27
bl
PART SELECT, ACCOMP/$ CHORDS button
EN-20, 28
bm
TONE, SAMPLING DEMO button EN-8, 11
bn
RHYTHM, ONE TOUCH PRESET $ button
EN-12, 27, 31
bo
SONG BANK button EN-11, 17
bp
Number buttons, [–]
/
[+] keys EN-4
bq
SAMPLED TONES/EFFECTS 1,
LISTEN button EN-14, 23
br
SAMPLED TONES/EFFECTS 2,
WATCH button EN-14, 23
bs
SAMPLED TONES/EFFECTS 3,
REMEMBER button EN-14, 24
bt
SAMPLED TONES/EFFECTS 4, NEXT button
EN-14, 22
ck
SAMPLED TONES/EFFECTS 5, AUTO button
EN-14, 25
cl
VOICE PERCUSSION, LESSON button EN-15, 22
cm
Speakers
cn
Song Bank list
co
Built-in microphone
cp
Display
cq
SAMPLING button EN-11
cr
Rhythm list
cs
Tone list
ct
CHORD root names EN-28
dk
Percussion instrument list EN-8
dl dm
dn do dp
dl
USB port EN-32
dm
SUSTAIN jack EN-9
dn
AUDIO IN jack EN-11, 35
do
DC 9.5V terminal EN-5
dp
PHONES/OUTPUT jack EN-6, 35
Back
CTK2400_A5_x1a_EN_ES.indd 5 2014/02/10 19:12:49
General Guide
EN-4
Use the number buttons and the [–] and [+] keys to change
the settings of the parameters that appear in the upper left
area of the display.
Use the number buttons to enter numbers and values.
Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 004, input 0 3 0 3 4.
Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
You can use the [+] (increase) and [–] (decrease) keys to
change the displayed number or value.
Holding down either key scrolls the displayed setting.
Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
Use the FUNCTION button (
3
) to access settings that let
you select the reverb type, pedal effect, etc.
1.
Press
3
(FUNCTION).
2.
Next press
3
(FUNCTION) until the parameter
whose setting you want to change is displayed.
Each press of
3
(FUNCTION) cycles through the
available parameters.
To scroll backwards through parameters, hold down
3
(FUNCTION) as you press
4
(METRONOME).
3.
When the parameter you want is displayed, use
bp
(10-key) to change its setting.
The parameter setting will disappear from the upper left
area of the screen if you do not perform any operation
for some time.
The tone and other parameters revert to their initial
defaults whenever you turn on power (page EN-6).
Using the 10-key Pad (
bp
)
Number Buttons
[–] and [+] Keys
Using the FUNCTION Button (
3
)
Mde r nPno
Setting
Parameter
Setting
Trans .
Parameter Display See Page
1 Transpose Trans. EN-10
2 Accompaniment Volume AcompVol EN-31
3 Song Volume Song Vol EN-19
4 Tuning Tune EN-10
5 Reverb Reverb EN-9
6 Voice Fingering Guide Speak EN-24
7 Note Guide NoteGuid EN-25
8 Performance Evaluation Scoring EN-25
9 Phrase PhraseLn EN-25
10 Sampling Start SampAuto EN-15
11 Sampling Play Back SampPB EN-16
12
Auto Incrementing during
Short Sampling
AutoIncr EN-16
13 Keyboard Channel Keybd Ch EN-33
14 Navigate Channels Navi. Ch EN-33
15 Local Control Local EN-34
16 Accomp Out AcompOut EN-34
17 Pedal Effect Jack EN-9
CTK2400_A5_x1a_EN_ES.indd 6 2014/02/10 19:12:49
English
EN-5
Getting Ready to Play
Either an AC adaptor or batteries can be used to power this
Digital Keyboard. Normally, use of AC adaptor power is
recommended.
The AC adaptor does not come with this Digital Keyboard.
Purchase it separately from your retailer. See page EN-1
for information about options.
Make sure that you use only the AC adaptor specified for this
Digital Keyboard. Use of a different type of AC adaptor can
cause malfunction.
Be sure to turn off Digital Keyboard power before
connecting or disconnecting the AC adaptor.
The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
To prevent breaking of the wire, take care to avoid
putting any type of load on the power cord.
Never insert metal, pencils, or any other objects into
the product’s 9.5V DC terminal. Doing so creates the
risk of accident.
Be sure to turn off power before loading batteries.
It is up to you to prepare six commercially available
AA-size batteries. Do not use oxyride batteries or any
other nickel based batteries.
1.
Open the battery cover on the bottom of the
Digital Keyboard.
2.
Load six AA-size batteries into the battery
compartment.
Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
3.
Insert the tabs of the battery cover into the
holes on the side of the battery compartment,
and close the cover.
Low Battery Indication
The indicator shown below starts to flash to let you know
when battery power is low. Replace the batteries with new
ones.
Preparing the Music Stand
Power Supply
Using the AC Adaptor
Specified AC Adaptor: AD-E95100L
(JEITA Standard plug)
No bending! No winding!
Music stand
Household power outlet DC 9.5V terminal
AC adaptor
Using Batteries
Tabs
Low battery indicator
(flashes)
CTK2400_A5_x1a_EN_ES.indd 7 2014/02/10 19:12:50
EN-6
Playing the Digital Keyboard
1.
Press
1
.
This turns on power.
To turn off the Digital Keyboard, press
1
again.
2.
Try playing something on the keyboard. Use
2
to adjust volume.
Turning off the Digital Keyboard power causes all
current settings to be cleared. The Digital Keyboard will
revert to initial default settings the next time you turn it
on.
The message “Pls wait” will remain on the display
while a data save operation is in progress. Do not
perform any other operation while it is displayed.
Turning off the Digital Keyboard can cause Digital
Keyboard data to be deleted or become corrupted.
If you do not perform any operation on the Digital Keyboard
for one of the trigger times noted below, Auto Power Off will
turn off power.
Disabling Auto Power Off
You can disable Auto Power Off to ensure that power is not
turned off automatically during a concert, etc.
1.
While holding down
bm
(TONE), turn on power.
Auto Power Off will be disabled.
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
Be sure to turn down the volume level before connecting
headphones.
Headphones do not come with the Digital Keyboard.
Use commercially available headphones. See page EN-1
for information about options.
Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
11 22 bmbm
bpbp
55
44
Turning on Power and Playing
Auto Power Off
During battery operation : 6 minutes
During AC adaptor operation: 30 minutes
Increase
Decrease
Using Headphones
PHONES/OUTPUT jack
CTK2400_A5_x1a_EN_ES.indd 8 2014/02/10 19:12:50
English
Playing the Digital Keyboard
EN-7
The metronome lets you play and practice along with a steady
beat to help keep you on tempo.
1.
Press
4
.
This starts the metronome.
2.
Press
4
again to stop the metronome.
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
You can specify 0, or a value from 2 to 6 as the number of
beat per measure.
When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.
1.
Hold down
4
until the beats per measure
setting screen appears on the display.
If you do not perform any operation for after the beats
per measure setting screen appears, the display will
return to the screen displayed before you pressed
4
.
2.
Use
bp
(10-key) to enter the number of beats
per measure.
The bell will not sound if you specify 0 for this setting. In
this case, all beats are indicated by a click sound. This
setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.
Use the following procedure to change the tempo of the
metronome.
1.
Press
5
.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
Pressing
5
causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
bp
(10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
The tempo value will stop flashing if you do not perform
any operation for a short while.
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
For information about changing the Auto Accompaniment
volume, see page EN-31.
For information about changing the song volume, see page
EN-19.
You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.
Using the Metronome
Start/Stop
Changing the Beats per Measure
This pattern changes with each beat.
Bea t
Changing the Metronome Tempo
Changing the Metronome Sound Volume
Tempo value (flashes)
CTK2400_A5_x1a_EN_ES.indd 9 2014/02/10 19:12:50
EN-8
Controlling the Keyboard Sounds
Your Digital Keyboard lets you select tones for a wide variety
of musical instrument sounds, including violin, flute, orchestra,
and more. Even the same song sound takes on a different feel
by changing the instrument type.
1.
Press
bm
(TONE).
2.
Use
bp
(10-key) to select the tone number you
want.
The corresponding tone number and tone name will
appear on the screen.
Use the number buttons to enter the tone number.
Specify three digits for the tone number.
Example: To select 001, enter 0 3 0 3 1.
See the separate “Appendix” for a complete list of available
tones.
When one of the drum sets is selected (tone numbers 395
through 400), each keyboard key is assigned a different
percussion sound.
3.
Try playing something on the keyboard.
The tone of the instrument you selected will sound.
Press
bm
(TONE) and
bn
(RHYTHM) at the same time.
This selects the grand piano tone.
Settings
bmbm
bpbp
33
bnbn
Select from a variety of musical
instrument sounds
To select an instrument for playing
St .GrPno
Tone name
Tone number
Playing with a Piano Tone (Piano Setup)
Tone Number: “001”
Reverb: “06”
Transpose: “00”
Pedal Effect: SUS
Rhythm Number: “131”
Accompaniment: Rhythm part only
Local Control: On
Voice Percussion:Off
CTK2400_A5_x1a_EN_ES.indd 10 2014/02/10 19:12:50
English
Controlling the Keyboard Sounds
EN-9
Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
Press
3
(FUNCTION) a number of times until
“Reverb” appears on the display (page EN-4).
2.
Use
bp
(10-key) [–] and [+] keys to select the
reverb setting you want.
A pedal can be used to change notes in various ways while
playing.
A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer. See page EN-1
for information about options.
Connect an optional pedal unit.
1.
Press
3
(FUNCTION) a number of times until
“Jack” appears on the display (page EN-4).
2.
Use
bp
(10-key) [–] and [+] keys to select the
pedal effect you want.
The following shows the available pedal effects.
Using Reverb
Off (oFF) Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
Reverb
Reverb
Indicator disappears when
reverb is turned off.
Using a Pedal
Connecting a Pedal Unit
Selecting the Pedal Effect
Sustain
(SUS)
Sustains notes played while the pedal is
depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.
Sostenuto
(SoS)
Sustains notes that are playing when the
pedal is depressed before the keyboard
keys are released.
Soft
(SFt)
Slightly softens notes played while the pedal
is depressed.
Rhythm
(rHy)
Pressing the pedal starts and stops Auto
Accompaniment or song playback.
SUSTAIN jack
Jack
CTK2400_A5_x1a_EN_ES.indd 11 2014/02/10 19:12:50
Controlling the Keyboard Sounds
EN-10
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
The transpose setting range is –12 to +12 semitones.
1.
Press
3
(FUNCTION).
2.
Use
bp
(10-key) [–] and [+] keys to select the
transpose setting you want.
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
1.
Press
3
(FUNCTION) a number of times until
“Tune” appears on the display (page EN-4).
2.
Use
bp
(10-key) [–] and [+] keys to adjust the
tuning.
Performing this step causes the display to change from
“Tune” to a value that indicates the current frequency
setting as shown below. You can change the frequency
in 0.1Hz steps.
Even if you do not perform a
bp
(10-key) operation to
adjust the tuning, the current frequency setting will
appear automatically after a few seconds.
Changing the Pitch
(Transpose, Tuning)
Changing the Pitch in Semitone Steps
(Transpose)
Fine Tuning (Tuning)
Trans .
Tune
440.0Hz
CTK2400_A5_x1a_EN_ES.indd 12 2014/02/10 19:12:50
English
EN-11
Sampling a Sound and Playing it on the Keyboard
(Sampling)
You can use the digital keyboard’s built-in microphone to
record a sound and then play it with the keyboard keys. The
sampling feature is a great way to create your own original
sounds.
Use the procedure below to play a demo tune that features
sampled sounds.
1.
Hold down
bm
(SAMPLING DEMO).
This starts playback.
2.
To stop demo play, press
bm
or
bk
.
Sampled sounds are recorded in monaural.
The built-in microphone is only for inputting and
recording external sounds for use with the sampling
function. Sounds input with the built-in microphone are
not output through the speakers.
You cannot sample sounds input through the AUDIO IN
jack.
There are two sampling methods: long sampling and short
sampling. Long sampling is used for sampling in the Song
Bank Mode, while short sampling is use for sampling in the
Rhythm Mode.
Long Sampling
This method allows sampling of a single sound with a duration
of two seconds.
Sampling a new sound overwrites all previously
recorded data (including data recorded with short
sampling).
1.
Press
bo
(SONG BANK).
2.
Press
cq
(SAMPLING) and release it.
This enters sampling standby.
11 cqcq
bqbq brbr bsbs btbt ckck clclbkbk
bobo
bmbm
bpbp
33
bnbn
Playing the SAMPLING DEMO
Sampling a Sound and Playing It
Flashes
Speak !
CTK2400_A5_x1a_EN_ES.indd 13 2014/02/10 19:12:51
Sampling a Sound and Playing it on the Keyboard (Sampling)
EN-12
3.
Produce the desired sound in the direction of
the built-in microphone.
Sampling will start automatically.
Sampling will not start if the volume level of the sound
being sampled with the microphone is too low.
Sampling will stop automatically two seconds after it
starts, or if the sound being input through the
microphone stops before then.
Random phrases using the sampled sound will play
back to indicate that sampling is complete.
What you sample is stored as tone number 401.
4.
Press a keyboard key.
This will play the recorded sound.
Short Sampling
With short sampling, you can record up to five samples, each
with a length of up to approximately 0.4 seconds. Short
samples are assigned rhythm parts, and can be sounded as
voice percussion. For details, see “Using a Sampled Sound in
a Rhythm (VOICE PERCUSSION)” (page EN-15).
Sampling a new sound overwrites all previously
recorded data (including data recorded with long
sampling).
1.
Press
bn
(RHYTHM).
If you want to use a rhythm for sampling, select it here.
2.
Press
cq
(SAMPLING) and release it.
This enters sampling standby.
At this time tone number 412 (which is short sampling 1
tone) is selected.
3.
Produce the desired sound in the direction of
the built-in microphone.
Sampling will start automatically.
Sampling will not start if the volume level of the sound
being sampled with the microphone is too low.
Sampling will stop automatically 0.4 seconds after it is
started.
The sampled sound is assigned a rhythm number and
start to play to indicate that sampling is complete.
What you sample is stored as tone number 412.
4.
Press a keyboard key.
This will play the recorded sound.
Samp l i ng
Flashes
Flashes
Speak !
Samp l i ng
Lights
Samp l ed !
CTK2400_A5_x1a_EN_ES.indd 14 2014/02/10 19:12:51
English
Sampling a Sound and Playing it on the Keyboard (Sampling)
EN-13
5.
Press
cq
(SAMPLING).
At this time tone number 415 (which is short sampling 2
tone) is selected.
Each subsequent short sampling operation is
automatically assigned to the next sequential tone
number. After sampling reaches tone number 424
(short sampling 5 tone), it cycles back to tone number
412 (short sampling 1 tone).
If you want to assign a sample to a specific number
manually, press the SAMPLED TONES/EFFECTS
button (1 to 5) that corresponds to the number you want
before pressing the SAMPLING button. This will
perform short sampling and assign the result to the
number that corresponds to the button you press.
6.
Repeat steps 2 through 5 as many times as
necessary to perform the short sampling you
want.
Long Sample
In the Song Bank Mode, the five SAMPLED TONES/
EFFECTS buttons have the functions described below.
1: Sounds the original sampled tone as-is.
2 to 5: Select effects.
The SAMPLING L indicator appears on the display when
there is a long sample (sample created with long sampling)
available.
Short Sample
In the Rhythm Mode, the five SAMPLED TONES/EFFECTS
button can be used to select short sample tones.
1: Tone number 412
2: Tone number 415
3: Tone number 418
4: Tone number 421
5: Tone number 424
The SAMPLING S indicator appears on the display when
there is one or more sample (sample created with short
sampling) available.
Sounding Sampled Sounds
CTK2400_A5_x1a_EN_ES.indd 15 2014/02/10 19:12:51
Sampling a Sound and Playing it on the Keyboard (Sampling)
EN-14
Use the procedure below to apply effects to a sample that was recorded using either long sampling or short sampling.
1.
Press one of the five
bq
-
ck
(SAMPLED TONES/EFFECTS) buttons to cycle through available effects.
Example: Button 1 (tone number 412)
Original tone 3 Loop 1 3 Loop 2 3 Original tone 3
See the “Sampled Sound Tone Numbers” table below for details about the effects that are assigned to each button.
Sampled Sound Tone Numbers
The original sampled sound and its modified (by effects) versions are assigned to sequential tone numbers (the same as built-
in tones). This makes it easy to select a version of a sampled sound using
bp
(10-key).
Applying an Effect to a Sound Sample
SAMPLED TONES/
EFFECTS button
Tone No. Effect Name Description
1
401 Original Long
402 Loop 1 Long Loops the sampled sound.
403 Loop 2 Long
Loops the sample sound and raises the pitch of the resonating sound when
the keyboard key is released.
2
404 Loop 3 Long
Loops the sample sound and lowers the pitch of the resonating sound when
the keyboard key is released.
405 Pitch 1 Long Changes the pitch from low to high, at an increasing rate.
3
406 Pitch 2 Long Changes pitch from high to low, at a decreasing rate.
407 Pitch 3 Long
Changes pitch from high to low, at a decreasing rate, and then raises the
pitch when the key is released.
4
408 Tremolo Long Alternates volume between high and low.
409 Funny 1 Long Adds vibrato and changes pitch by a gradually increasing amount.
5
410 Funny 2 Long Alternates between high pitch and low pitch.
411 Funny 3 Long Adds vibrato and changes pitch from low to high.
1
412 Original Short 1
413 Loop 1 Short 1 Loops the sampled sound.
414 Loop 2 Short 1
Loops the sample sound and raises the pitch of the resonating sound when
the keyboard key is released.
2
415 Original Short 2
416 Loop 3 Short 2
Loops the sample sound and lowers the pitch of the resonating sound when
the keyboard key is released.
417 Pitch 1 Short 2 Changes the pitch from low to high, at an increasing rate.
3
418 Original Short 3
419 Pitch 2 Short 3 Changes pitch from high to low, at a decreasing rate.
420 Pitch 3 Short 3
Changes pitch from high to low, at a decreasing rate, and then raises the
pitch when the key is released.
4
421 Original Short 4
422 Tremolo Short 4 Alternates volume between high and low.
423 Funny 1 Short 4 Adds vibrato and changes pitch by a gradually increasing amount.
5
424 Original Short 5
425 Funny 2 Short 5 Alternates between high pitch and low pitch.
426 Funny 3 Short 5 Adds vibrato and changes pitch from low to high.
CTK2400_A5_x1a_EN_ES.indd 16 2014/02/10 19:12:51
English
Sampling a Sound and Playing it on the Keyboard (Sampling)
EN-15
Use the following procedure to replace a percussive
instrument with a sampled sound you sampled with short
sampling and play auto accompaniment rhythms (page
EN-27) with it.
1.
Each press of
cl
(VOICE PERCUSSION) button
toggles between the VOICE PERCUSSION mode
and the normal rhythm mode.
The VOICE PERCUSSION indicator will be on the
display while the VOICE PERCUSSION mode is
selected.
2.
Start rhythm play (page EN-27).
Some rhythm part sounds are replaced by sampled
sounds you sampled with short sampling.
In the VOICE PERCUSSION mode, the rhythm
accompaniment volume level is balanced with the volume
of the sampled sound. Because of this, the rhythm
accompaniment (chords and obbligato) volume level will be
lowered automatically.
1.
Press
3
(FUNCTION) a number of times until
“SampAuto” appears on the display (page
EN-4).
2.
Press
bp
(10-key) [–] key to select the OFF
setting.
This enables manual sampling. When this setting is
selected, sampling starts as soon as you release
cq
in
step 2 under “Long Sampling” (page EN-11) or step 2
under “Short Sampling” (page EN-12).
When the above setting is “oFF”, sampling starts when
you release
cq
, not when you press it. Sampling will
not start if you keep
cq
depressed.
1.
Press
1
to turn off power.
2.
While holding down
bo
(SONG BANK) and
bp
(10-key) [0] button, press
1
to turn power back
on again.
Make sure the digital keyboard is not connected to a
computer when performing the above steps. Otherwise,
data may not be deleted correctly.
1.
Press
bo
(SONG BANK).
2.
Hold down
bq
(SAMPLED TONES/EFFECTS 1).
This will cause the confirmation message “Sure?” to
appear.
3.
Press
bp
(10-key) [YES] key to delete the data
or
bp
(10-key) [NO] key to cancel.
1.
Press
bn
(RHYTHM).
2.
Hold down the SAMPLED TONES/EFFECTS
button (
bq
to
ck
) whose data you want to
delete.
This will cause the confirmation message “Sure?” to
appear.
3.
Press
bp
(10-key) [YES] key to delete the data
or
bp
(10-key) [NO] key to cancel.
Using a Sampled Sound in a
Rhythm (VOICE PERCUSSION)
Starting a Sampling Operation
Manually
Lights
SampAu t o
Deleting Sampled Data
To delete all sampled data
To delete the long sample
To delete the data for a specific short sample
number
CTK2400_A5_x1a_EN_ES.indd 17 2014/02/10 19:12:51
Sampling a Sound and Playing it on the Keyboard (Sampling)
EN-16
Use the procedure below to enable or disable the auto
playback routine (song or rhythm using sampled sound) that
is performed after sampling is complete.
1.
Keep pressing
3
(FUNCTION) until “SampPB”
appears on the display.
2.
Press
bp
(10-key) [–] key to disable the demo
routine.
While the demo routine is disabled, the playback in step
3 at the end of long sampling and short sampling is not
performed.
Use this procedure to enable or disable auto incrementing of
the short sampling number during short sampling.
1.
Keep pressing
3
(FUNCTION) until “AutoIncr”
appears on the display.
2.
Press
bp
(10-key) [–] key to disable short
sample number incrementing.
When short sample number incrementing is turned off,
short sampling is repeated using the number (number
does not change) selected with the SAMPLED TONES/
EFFECTS (1 to 5) button. To change short sampling to
another number, you need to press a different SAMPLED
TONES/EFFECTS (1 to 5) button before pressing the
SAMPLING button.
Enabling or Disabling the
Sampling Play Back
Enabling or Disabling Auto
Incrementing during Short
Sampling
CTK2400_A5_x1a_EN_ES.indd 18 2014/02/10 19:12:51
English
EN-17
Playing Built-in Songs
With this Digital Keyboard, built-in tune data is referred to as
“songs”. You can listen to the built-in songs for your own
enjoyment, or you can play along with them for practice.
In addition to simple listening enjoyment, the built-in songs
can be used with the lesson system (page EN-21) for
practice.
Use the following procedure to play back built-in songs (001 to
090).
1.
Press
bk
and
bl
at the same time.
This will start playback of the demo songs. Demo
playback continues until you stop it.
See page EN-40 for a complete list of available songs.
Demo playback always starts from song number 001.
2.
To change to another song while demo
playback is in progress, use
bp
(10-key) [–] and
[+] keys to enter the song number you want
(page EN-4).
This will cause demo playback to jump to the song whose
number you entered.
You cannot use
bp
(10-key) number buttons to select a
song.
3.
To stop demo playback, press
bk
.
Demo playback continues until you stop it by pressing
bk
.
Use the procedure below to play back one of the built-in
songs. You can play along on the keyboard with song
playback.
1.
Press
bo
(SONG BANK).
2.
Use
bp
(10-key) to enter the number of the song
you want.
See page EN-40 for a complete list of available songs.
Use the number buttons to enter the song number.
Specify three digits for the song number.
Example: To select 001, enter 0 3 0 3 1.
bpbp
55
33
66 77 88 99 bkbk blbl
bobo
Playing the Demo Songs
Tw i nk l e
Tune name
Song number
Flashes
Playing Back a Particular Song
Start/Stop
Tw i nk l e
Tune name
Song number
Lights
Lights
CTK2400_A5_x1a_EN_ES.indd 19 2014/02/10 19:12:51
Playing Built-in Songs
EN-18
3.
Press
bk
.
This starts playback of the song.
4.
Press
bk
again to stop playback.
Song playback will continue (repeat) until you press
bk
to
stop it. You can cancel song repeat by pressing
6
.
Use the operations in this section to perform pause, skip
forward, and skip back operations.
Pause
1.
Press
9
.
This pauses song playback.
2.
Press
9
again to resume playback from the
point where you paused it.
Skip Forward
1.
Press
8
.
This skips song playback forward to the next measure.
Each press of
8
skips ahead one measure. Holding
down
8
skips forward at high speed until you release it.
Pressing
8
while song playback is stopped performs
lesson function phrase skip forward (page EN-22).
Skip Back
1.
Press
7
.
This skips song playback back to the previous measure.
Each press of
7
skips back one measure. Holding down
7
skips back at high speed until you release it.
Pressing
7
while song playback is stopped performs
lesson function phrase skip back (page EN-22).
You can use the procedure in this section to repeat particular
measures for practice playing along until you master it. You
can specify the start measure and the end measure of the
section you want to play and practice.
1.
Press
6
to temporarily turn off song repeat.
Pause, Skip Forward, Skip Back
Key
Note
Tempo
Beat
Measure
Fingering
Sustain pedal
Indicator disappears when song repeat
is turned off.
Repeating Playback of Specific Measures
Measure number
Start End
These measures are repeated.
Disappears
CTK2400_A5_x1a_EN_ES.indd 20 2014/02/10 19:12:52
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47

Casio 2400 User manual

Category
Digital pianos
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI