www.lg.com
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO: MFL63724108(1005-REV00)
Printed in Thailand
2
ENGLISH
SAFETY INSTRUCTIONS
• Please read these safety precautions carefully before using the product.
• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruc-
tion.
PRECAUTION IN INSTALLING THE PRODUCT
WARNING
WARNING
CAUTION
Keep away from heat sources like electrical
heaters.
- Electrical shock, fire, malfunction or deforma-
tion may occur.
If you can smell smoke or other odors or hear
a strange sound unplug the power cord and
contact the service center.
- If you continue to use without taking proper
measures, electrical shock or fire can occur.
Do not use the product in damp place such as
a bathroom or any place where it is likely to get
wet.
- This may cause a fire or could give an electric
shock.
Install the product on a flat and stable place
that has no risk of dropping the product.
- If the product is dropped, you may be
injured or the product may be broken.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in instal-
lation such as bookcase or rack.
- Ventilation required.
ELECTRICAL POWER RELATED PRECAUTIONS
Make sure to connect the power cable to the
grounded current.
- You may be electrocuted or injured.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered
with dust, dry the power plug completely or
wipe dust off.
- You may be electrocuted due to excess
moisture.
During a thunder or lightning storm, unplug
the power cable or signal cable.
- You may be electrocuted or a fire can break
out.
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
PRECAUTIONS IN MOVING THE PRODUCT
Do not shock the product when moving it.
- You may be electrocuted or the product
can be damaged.
Make the panel face forward and hold it
with both hands to move.
- If you drop the product, the damaged
product can cause electric shock or fire.
Contact with the service center for repair.
Make sure to turn off the product.
Make sure to remove all cables before mov-
ing the product.
- You may be electrocuted or the product
can be damaged.
PRECAUTIONS IN USING THE PRODUCT
Do not disassemble, repair or modify the
product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, cali-
bration or repair.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with liq-
uids, such as vases, shall be placed on the
apparatus.
Refer all servicing to qualified service per-
sonnel. Servicing is required when the
apparatus has been damaged in any way,
such as power supply cord or plug is dam-
aged, liquid has been spilled or objects
have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
WARNING
WARNING
CAUTION
CAUTION
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /
BURN-IN” ON YOUR TELEVISION SCREEN
-
When a fixed image (e.g. logos, screen menus, video game,
computer display and teletext pages) is displayed on the televi-
sion for an extended period it can become permanently imprint-
ed on the screen. This phenomenon is known as “image burn” or
“burn-in”. Image burn is not covered under the manufacturer’s
warranty.
-
In order to prevent image burn, avoid displaying a fixed image on
your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
-
Image burn can also occur on the letterboxed areas of your
television if you use the 4:3 aspect ratio setting for an extended
period.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off
this unit by SWITCH.
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
If you ignore the caution message, you may be slightly injured or the product may be damaged.
CAUTION
WARNING
3
ENGLISH
■ Image shown may differ from your TV.
■ To connect an additional equipment, see the External equipment Setup section in CD Manual.
CONNECTING YOUR UNIT
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
COMPONENT IN
/DVI IN
WIRELESS
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
R
1
2
COMPONENT IN
AUDIO
VIDEO
L/MONO
AUDIO
VIDEO
AV IN1
1
2
VCR Connection
2
DVD/STB
2
Antenna
Connection
1
Power Cord
3
TO VIEW THE USER'S GUIDE ON THE CD-ROM
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader.
If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder
"ACRORD" double-click your language.
To view the User's guide
The User's guide files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically.(Windows users only)
If the web page does not appear automatically, open the User's guide file directly.
Open "My computer" Open the folder "LG" Double click the "index.htm" file.
TO VIEW THE SIMPLE MANUAL
You can easily and effectively access the TV information by viewing the simple manual on the TV.
Press the GREEN button, you can check the Simple manual menu.
Press the EXIT button to return to normal TV viewing.
1
2
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains
or fingerprints on the
surface of the TV with
the polishing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
4
ENGLISH
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
Owner’s Manual
Batteries
(AAA)
Remote Control
M4X20
M4X20
x 8
Only 22LD3**
Cable Holder
(Refer to p. 20)
Protection Cover
(Refer to p. 22)
Only 26/32LD3**
(M4 X 20)
ACCESSORIES
Protection Cover
(Refer to p. 22)
Bolts for stand assembly
(Refer to p. 17)
(Except for
32/37/42/47/55/60LE5***,
32/37/42/47/55LE7***,
42/47/55LE8***,
42/47/55LX6***, 47/55LX9***)
Only 32/37/42/47LD4**
Bolts for stand assembly
(Refer to p. 17)
x 8
(M4 X 20)
Protection Cover
(Refer to p. 22)
x 8
Only 32/42/46/52/60LD5**
(M4 X 20)
Bolts for stand assembly
(Refer to p. 17)
Only 22/26LE53**
AC/DC Adaptor
(Refer to p. 23)
4-Ring spacers
(Only 26LE53
**
)
(Refer to p. 23)
Bolts for stand assembly
(Refer to p. 18)
(M4x14)
x 4
(M4x20)
(Only 26LE53
**
)
x 4
Protection Cover
(Refer to p. 22)
Cable Holder
(Refer to p. 21)
Power Cord
1-screw for stand fixing
(Refer to p. 21)
(Only 26/32LD3**, 32/37/42LD4**,
32/42LD5**, 32/37/42LD6**, 32/42LE4***,
32LE5***)
PREPARATION
Nero MediaHome
4 Essentials CD
(Only 32/42/52LD56*)
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE
INPUT
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
SUBTITLE
AD
TV/
RAD
BACK
EXIT
OK
MENU
Q.MENU
GUIDE
INFO i
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE
INPUT
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
TV/
RAD
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CHAR/NUM
DELETE
SUBTITLE
INFO i
BACK
EXIT
OK
MENU
Q.MENU
GUIDE
or
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE
INPUT
ENERGY
SAVING
MARK
FAV
RATIO
MUTE
TV/
RAD
SUBTITLE
BACK
EXIT
OK
MENU
Q.MENU
GUIDE
INFO i
or
or
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE
INPUT
ENERGY
SAVING
MARK
FAV
3D
MUTE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CHAR/NUM
DELETE
INFO i
BACK
EXIT
OK
MENU
Q.MENU
TV/
RAD
L/R SELECT
RATIO
LIGHT
GUIDE
or
P
A
G
E
P
1 2 3
4 5
0
6
7 8 9
LIST
Q.VIEW
AV MODE
INPUT
ENERGY
SAVING
MARK
FAV
3D
MUTE
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CHAR/NUM
DELETE
INFO i
BACK
EXIT
OK
MENU
Q.MENU
TV/
RAD
L/R SELECT
RATIO
LIGHT
GUIDE
5
ENGLISH
Cable Holder
(Refer to p. 21)
Component gender cable,
AV gender cable
Only 32/37/42/47/55LE53
**
x 2
Bolts for stand assembly (Refer to p. 18)
(M4x26)
(Only
47/55LE53
**
)
x 4
(M4x16)
x 4
(M4x22)
(Only 32LE53
**
)
x 4
(M4x24)
(Only
37/42LE53
**
)
x 4
Cable Holder
(Refer to p. 21)
Only 32/37/42/47/55/60LE55**, 32/37/42/47/55LE7***, 42/47/55LE8***, 42/47/55LX6***, 47/55LX9***
Nero MediaHome
4 Essentials CD
Bolts for stand assembly
(Refer to p. 19)
x 8
(M4 x 16)
(Only 32/37/42/47LE55
**
,
32/37/42/47LE7
***,
42/47LX6***)
x 8
(M4 x 20)
(Only 42/47/55LE8
***
)
x 4x 4
(M4 x 16)(M4 x 24)
(Only 55LE55
**
,
55LE7
***,
55LX6***)
Component gender cable,
AV gender cable
x 2
Protection cover
(Refer to p. 22)
Bolts for stand assembly
(Refer to p. 17)
(M4x20)
x 8
Only 32/37/42/47/55LD6**
Nero MediaHome
4 Essentials CD
Slightly wipe stained spot on the exterior only with
the cleansing cloths(mitt) for the product exterior if
there is stain or fingerprint on surface of the exterior.
For cleaning front frame, please slowly wipe in one
direction after spraying water 1~2 times on cleansing
cloths. Please remove excessive moisture after cleaning.
Excessive moisture may cause water stains on the frame.
(Only 32/37/42/47/55LE7
***
)
cleansing cloths(mitt)
M4x12
M4x22
M4X20
M4X20
(Only 47/55LX9***)
Bolts for stand assembly
(Refer to p. 20)
M4X20
M4X20
x 4
x 4
3D Glasses
(Only 42/47/55LX6
***
)
3D Glasses
(Only 47/55LX9***)
x 2
Stand Rear Cover
6
ENGLISH
P
OK
MENU
INPUT
INPUT
MENU
OK
P
INPUT
MENU
OK
P
■ Image shown may differ from your TV.
NOTE
►
TV can be placed in standby mode in order to reduce the power consumption. And TV should
be switched off using the power switch on the TV if it will not be watched for some time, as this
will reduce energy consumption.
► The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
P
OK
MENU
INPUT
INPUT
MENU
OK
P
INPUT
MENU
OK
P
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
P
OK
MENU
INPUT
INPUT
MENU
OK
P
INPUT
MENU
OK
P
PROGRAMMEVOLUME
OKMENU
INPUTPOWER
Only 22LD3**
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
Remote Control Sensor
P
OK
MENU
INPUT
INPUT
MENU
OK
P
INPUT
MENU
OK
P
Only 26/32LD3**
SPEAKER
FRONT PANEL CONTROLS
PREPARATION
Only 22/26/32LD3**
7
ENGLISH
INPUT
MENU
OK
P
INPUT
MENU
OK
P
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
SPEAKER
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
INPUT
MENU
OK
P
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Only 32/42/46/52/60LD5**
OK
P
MENU
INPUT
■ Image shown may differ from your TV.
OK
P
MENU
INPUT
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
OK
P
MENU
INPUT
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
SPEAKER
Only 32/37/42/47LD4**
8
ENGLISH
PREPARATION
■ Image shown may differ from your TV.
INPUT
MENU
OK
P
SPEAKER
Power/Standby Indicator
(Can be adjusted using the Power Indicator in the
OPTION menu.)
Remote Control Sensor
INPUT
MENU
OK
P
Intelligent Sensor
Adjusts picture according to the surrounding conditions.
INPUT
MENU
OK
P
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Only 32/37/42/47/55LD6**
P
OK
INPUT
MENU
■ Image shown may differ from your TV.
SPEAKER
P
OK
INPUT
MEN
U
Remote Control Sensor
P
OK
INPUT
MENU
OKPROGRAMME
INPUT
VOLUME MENU POWER
Power/Standby Indicator
(Can be adjusted using the
Power Indicator in the
OPTION menu.)
Only 22/26LE53**
9
ENGLISH
■ Image shown may differ from your TV.
Only 32/37/42/47/55/60LE5***, 32/37/42/47/55LE7***, 42/47/55LX6***
INPUT
MENU
P
OK
Remote Control Sensor
INPUT
MENU
P
OK
INPUT
MENU
P
OK
PROGRAMME
VOLUME
MENU
POWER
INPUTOK
Touch Sensor
• You can use the desired button function by touching.
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Power/Standby Indicator
(Can be adjusted using the Power
Indicator in the OPTION menu.)
Emitter (Only 42/47/55LX6
***
)
It is the part equipped with the emitter
exchanging signal with 3D glasses.
Please be careful not to block
the screen with objects or people
while watching a 3D Video.
SPEAKER
10
ENGLISH
Only 42/47/55LE8***
INPUT
MENU
P
OK
SPEAKER
Remote Control Sensor
INPUT
MENU
P
OK
INPUT
MENU
P
OK
INPUTOK
MENU
POWER
Touch Sensor
• You can use the desired button function by touching.
Power/Standby Indicator
(Can be adjusted using the Power Indicator in the OPTION
menu.)
PROGRAMME
VOLUME
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
■ Image shown may differ from your TV.
11
ENGLISH
SPEAKER
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.)
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Only 47/55LX9***
■ Image shown may differ from your TV.
Emitter
It is the part equipped with the
emitter exchanging signal with 3D
glasses.
Please be careful not to block
the screen with objects or
people while watching a 3D
Video.
12
ENGLISH
PREPARATION
Only 26/32LD3**
■ Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the TV on DC
power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Antenna / Cable Input
Connect antenna or cable to this jack.
SERVICE ONLY PORT
Headphone Socket
Plug the headphone into the headphone
socket.
USB Input
Connect USB storage device to this jack.
1
2
3
4
5
6
7
8
9
10
11
Only 22LD3**
BACK PANEL INFORMATION
12
AC IN
CABLE MANAGEMENT
1
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN 1
AV IN2
IN 2
1
L/MONO
SERVICE ONLY
2
3 5
8
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN 1
AV IN2
IN 2
1
L/MONO
SERVICE ONLY
12
2
11
6
9
7
4
7
K
AC-IN
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABEL IN
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
L(MONO)
R
AUDIO
VIDEO
COMPONENT IN
AV IN
SERVICE ONLY
2
3 4 5 6
8
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABEL IN
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
L(MONO)
R
AUDIO
VIDEO
COMPONENT IN
AV IN
SERVICE ONLY
10
11
9
7
1
13
ENGLISH
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the TV on DC
power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
WIRELESS Control
Connect the Wireless Dongle to the TV to
control the external input devices connected
to Media Box wirelessly.
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Antenna / Cable Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
Only 32/42/46/52/60LD55*
■ Image shown may differ from your TV.
CABLE MANAGEMENT
AC IN
1
AV IN2
IN 3
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
COMPONENT IN
/DVI IN
WIRELESS
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
R
H/P
RS-232C IN
(
CONTROL&SERVICE)
AUDIO IN
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO OUT
ANTENNA IN
RGB IN (PC)
/DVI IN
WIRELESS
CONTROL
1
2
COMPONENT IN
AUDIO
VIDEO
L/MONO
R
AUDIO
VIDEO
AV IN1
1
2
COMPONENT IN
AUDIO
VIDEO
L/MONO
AUDIO
VIDEO
AV IN1
AV IN2
IN 3
H/P
1
2
2
1
2
3 4 5 6
9
AV IN2
IN 3
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
COMPONENT IN
/DVI IN
WIRELESS
CONTROL
OPTICAL
DIGITAL
AUDIO OUT
R
H/P
RS-232C IN
(
CONTROL&SERVICE)
AUDIO IN
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO OUT
ANTENNA IN
RGB IN (PC)
/DVI IN
WIRELESS
CONTROL
1
2
COMPONENT IN
AUDIO
VIDEO
L/MONO
R
AUDIO
VIDEO
AV IN1
1
2
COMPONENT IN
AUDIO
VIDEO
L/MONO
AUDIO
VIDEO
AV IN1
AV IN2
IN 3
H/P
1
2
2
1
11
2
12
8
7
10
8
AV IN 2
L/MONO
R
AUDIO
VIDEO
HDMI IN 2 USB IN
H/P
ANTENNA IN
HDMI / DVI IN
1
(RGB)
1
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN 1
AV IN2
IN 2
1
L/MONO
2
4 5
9
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
/DVI IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN 1
AV IN2
IN 2
1
L/MONO
11
2
12
7
10
8
6
8
Only 32/37/42/47LD4**
14
ENGLISH
PREPARATION
Only 22LE53**
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN
IN 3
L(MONO)
/DVI IN
1
2
(DVI)
H/P
DC-IN
12
2
13
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN
IN 3
L(MONO)
/DVI IN
1
2
(DVI)
H/P
DC-IN
14
4
10 11
3
6
7
8
5
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
ANTENNA /
CABLE IN
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
H/P
AUDIO
VIDEO
COMPONENT IN
AV IN
IN 3
L(MONO)
/DVI IN
1
2
(DVI)
H/P
DC-IN
Only 26LE53**
Only 22/26LE53**
Only 32/42/52LD56*, 32/37/42/47/55LD6**
CABLE MANAGEMENT
AC IN
1
2
HDMI/DVI IN
(RGB)
WIRELESS
CONTROL
LAN
AV IN 2
L/MONO
R
AUDIO
VIDEO
HDMI IN 3 USB IN 1
H/P
USB IN 2
ANTENNA IN
1
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
RGB/DVI
WIRELESS
CONTROL
OPTICAL DIGITAL
1
2
COMPONENT IN
AUDIO
VIDEO
LAN
/DVI IN
1
2
AUDIO IN
AUDIO OUT
R
L(MONO)
AUDIO
VIDEO
AV IN 1
h}GpuY
puGZ
H/P
USB IN 1
USB IN 2
ANTENNA /
CABLE IN
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
RGB/DVI
WIRELESS
CONTROL
OPTICAL DIGITAL
1
2
COMPONENT IN
AUDIO
VIDEO
LAN
/DVI IN
1
2
AUDIO IN
AUDIO OUT
R
L(MONO)
AUDIO
VIDEO
AV IN 1
h}GpuY
puGZ
H/P
USB IN 1
USB IN 2
ANTENNA /
CABLE IN
12
12
3
8
2
3 54
6
10
8
7
9
11
13
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the TV on DC
power.
LAN
Network connection for Weather info, Photo
Album, Movie Online, etc.
Also used for video, photo and music files on
a local network.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
WIRELESS Control
Connect the Wireless Dongle to the TV to
control the external input devices connected
to Media Box wirelessly.
Component Input
Connect a component video/audio device to
these jacks.
Antenna / Cable Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
Headphone Socket
Plug the headphone into the headphone
socket.
DC ADAPTER PORT
Connect to the power cord socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
■ Image shown may differ from your TV.
CABLE MANAGEMENT
AC IN
1
or
15
ENGLISH
Only 32/37/42/47/55LE53**
CAUTION
► Use a product with the follow-
ing thickness for optimal con-
nection to HDMI cable(only
HDMI IN 4) / USB device.
*A 10 mm
■ Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the TV on DC
power.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
WIRELESS Control
Connect the Wireless Dongle to the TV to
control the external input devices connected
to Media Box wirelessly.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
Component Input
Connect a component video/audio device to
these jacks.
Antenna / Cable Input
Connect antenna or cable to this jack.
USB Input
Connect USB storage device to this jack.
Headphone Socket
Plug the headphone into the headphone
socket.
1
2
3
4
5
6
7
8
9
10
11
12
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
(RGB/DVI)
WIRELESS
CONTROL
/DVI IN
1
2
3
AUDIO IN
OPTICAL
DIGITAL
AUDIO OUT
AUDIO
VIDEO
COMPONENT IN1
R
L(MONO)
AUDIO
VIDEO
AV IN 1
ANTENNA /
CABLE IN
(DVI)
H/P
USB IN
AV IN2
VIDEO / AUDIO
COMPONENT IN2
/ AUDIO
IN 4
Y PB PR
1(DVI)
2
3
HDMI/DVI IN
(RGB)
WIRELESS
CONTROL
L/MONO
R
AUDIO
VIDEO
AV IN 2
LAN
USB IN 2
H/P
USB IN 1
HDMI
IN 4
ANTENNA
IN
AV IN3
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B PR
1
2 43
8
6
5
7 9
10
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
(RGB/DVI)
WIRELESS
CONTROL
/DVI IN
1
2
3
AUDIO IN
OPTICAL
DIGITAL
AUDIO OUT
AUDIO
VIDEO
COMPONENT IN1
R
L(MONO)
AUDIO
VIDEO
AV IN 1
ANTENNA /
CABLE IN
(DVI)
H/P
USB IN
AV IN2
VIDEO / AUDIO
COMPONENT IN2
/ AUDIO
IN 4
Y PB PR
6
9
12
2
11
16
ENGLISH
PREPARATION
Only 32/37/42/47/55/60LE55**, 32/37/42/47/55LE7***, 42/47/55LE8***,
42/47/55LX6***, 47/55LX9***
1(DVI)
2
3
HDMI/DVI IN
(RGB)
WIRELESS
CONTROL
L/MONO
R
AUDIO
VIDEO
AV IN 2
LAN
USB IN 2
H/P
USB IN 1
HDMI
IN 4
ANTENNA
IN
AV IN3
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B PR
1
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
(RGB/DVI)
WIRELESS
CONTROL
OPTICAL DIGITAL
1
2
COMPONENT IN
AUDIO
VIDEO
LAN
/DVI IN
1
2
3
AUDIO IN
AUDIO OUT
R
L(MONO)
AUDIO
VIDEO
AV IN 1
USB IN 2
H/P
USB IN 1
AV IN2
VIDEO / AUDIO
COMPONENT IN3
AUDIO / Y P
B PR
IN 4
12
11
8
3
10
CAUTION
► Use a product with the follow-
ing thickness for optimal con-
nection to HDMI cable(only
HDMI IN 4) / USB device.
*A 10 mm
■ Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
Never attempt to operate the TV on DC
power.
LAN
Network connection for Weather info, Photo
Album, Movie Online, etc.
Also used for video, photo and music files on
a local network.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
WIRELESS Control
Connect the Wireless Dongle to the TV to
control the external input devices connected
to Media Box wirelessly.
Component Input
Connect a component video/audio device to
these jacks.
USB Input
Connect USB storage device to this jack.
Headphone Socket
Plug the headphone into the headphone
socket.
Antenna / Cable Input
Connect antenna or cable to this jack.
1
2
3
4
5
6
7
8
9
10
11
12
13
RGB IN
(PC)
RS-232C IN
(CONTROL & SERVICE)
(RGB/DVI)
WIRELESS
CONTROL
OPTICAL DIGITAL
1
2
COMPONENT IN
AUDIO
VIDEO
LAN
/DVI IN
1
2
3
AUDIO IN
AUDIO OUT
R
L(MONO)
AUDIO
VIDEO
AV IN 1
USB IN 2
H/P
USB IN 1
AV IN2
VIDEO / AUDIO
COMPONENT IN3
AUDIO / Y P
B
P
R
IN 4
ANTENNA/
CABLE IN
2
3 54
6
10
8
7
9
13
17
ENGLISH
M4X20
M4X20
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
1
3
4
M4X20
M4X20
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Body
Stand Base
M4X20
M4X20
M4X20
M4X20
M4X20
M4X20
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Only 22LD3**
Only 26/32LD3**, 32/37/42/47LD4**,
32/42/46/52/60LD5**, 32/37/42/47/55LD6**
Assemble the TV as shown.
2
STAND INSTALLATION
18
ENGLISH
PREPARATION
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in
the back of the TV.
3
4
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Stand Base
M4 X 14
Only 22LE53**
Stand Body
■ Image shown may differ from your TV.
Only 26/32/37/42/47/55LE53**
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
3
Assemble the parts of the Stand Body with
the Stand Base of the TV.
2
Assemble the parts of the Stand Rear
Cover with the TV.
4
Stand Rear
Cover
M4 X 20
(Only 26LE53
**
)
Fix the 4 bolts securely using the holes in
the back of the TV.
5
M4 X 14
(Only 26LE53
**
)
M4 X 16 (Only
32/37/42/47/55LE53
**
)
Stand
Body
Stand
Base
M4 X 22(Only 32LE53
**
)
M4 X 24 (Only 37/42LE53
**
)
M4 X 26 (Only 47/55LE53
**
)
19
ENGLISH
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the TV as shown.
3
Assemble the parts of the Stand Rear
Cover with the TV.
4
Stand Rear
Cover
Fix the 4 bolts securely using the holes in
the back of the TV.
5
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
2
Stand
Body
Stand
Base
M4 X 16
(Only 32/37/42/47LE55
**
,
32/37/42/47LE7
***
, 42/47LX6***)
M4 X 24
(Only 55LE55**,
55LE7***, 55LX6***)
M4 X 16
(Only
32/37/42/47/55LE55
**
,
32/37/42/47/55LE7
***
,
42/47/55LX6***)
M4 X 20
(Only 42/47/55LE8
***
)
M4 X 20
(Only 42/47/55LE8
***
)
Only 32/37/42/47/55LE55**, 32/37/42/47/55LE7***, 42/47/55LE8***, 42/47/55LX6***
■ Image shown may differ from your TV.
20
ENGLISH
PREPARATION
■ Image shown may differ from your TV.
Only 22LD3**
Only 26/32LD3**, 32/37/42/47LD4**,
32/37/42/47/55LD6**, 32/42/46/52/60LD5**
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
K
AC-IN
K
AC-IN
AC IN
AC IN
AC IN
Connect the cables as necessary.
To connect additional equipment, see the
External equipment setup section.
1
Open the Cable Management Clip as
shown and manage the cables.
2
Fit the Cable management clip as shown.
3
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Management Clip
AC IN
AC IN
AC IN
AC IN
AC IN
AC IN
Cable Holder
NOTE
►Do not use the CABLE MANAGEMENT CLIP
to lift the TV.
- If the TV is dropped, you may be injured or the
TV may be damaged.
BACK COVER FOR WIRE
ARRANGEMENT
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
2
Stand Body
Stand Base
Fix the 4 bolts securely using the holes in
the back of the TV.
3
Assemble the parts of the Stand Rear
Cover with the TV.
4
M4 X 12
M4 X 22
M4X20
M4X20
M4X20
M4X20
Only 47/55LX9***
Stand Rear
Cover
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
