LG 47LX9550 User guide

Category
LCD TVs
Type
User guide

This manual is also suitable for

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating
LED LCD TV MODELS
47LX9***
55LX9***
your set and retain it for future reference.
www.lg.com
ENGLISH
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or regis-
tered trademarks of HDMI Licensing LLC.
Separate purchase
Wall Mounting Bracket
(47LX9
***
)
(55LX9
***
)
LSW400B or
LSW400BG
LSW200B or
LSW200BG
Wireless Media Box
Wireless LAN for
Broadband/
DLNA Adaptor
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV.
OUT
WIRELESS
CONTROL
AV1 AV2
COM
HDMI 1 HDMI 2 HDMI 3 HDMI 4
RGB
WIRELESS
AN-WL100W
I
CONTENTS
CONTENTS
PREPARATION
Accessories.....................................................
A-1
Front Panel Controls.......................................
Back Panel Information...................................
A-2
A-2
Stand Installation............................................
A-4
Back Cover for Wire Arrangement..................
A-5
Swivel Stand...................................................
A-5
Kensington Security System............................
A-6
Careful Installation Advice...............................
A-6
Earthing...........................................................
A-7
Desktop Pedestal Installation..........................
A-7
Wall Mount: Horizontal Installation.................
A-7
Remote Control Key Functions.......................
A-8
Magic Motion Remote Control Key Functions.
A-10
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component cable ..................2
Connecting with an HDMI cable .........................3
Connecting with an HDMI to DVI cable ..............4
USB setup ..........................................................5
Connecting with AN RF Cable ............................5
Connecting with AN RCA cable ..........................6
Connecting with a D-sub 15 pi
n cable ................7
Digital audio out Setup ........................................8
External Equipment WIreless Connection ..........9
Supported Display Resolution ...........................10
Screen Setup for PC mode ...............................12
Network setup ...................................................16
WATCHING TV / PROGRAMME CON-
TROL
RF Specification of the Magic Motion Remote
Control
...............................................................26
Registering the Magic Motion Remote Control .26
How to Use the Magic Motion Remote Control 27
Precautions to Take when Using the Magic
Motion Remote Control .....................................27
Pointer Menu Options .......................................28
Turning on the TV .............................................29
Initializing Setup .............................................
..29
Programme Selection ........................................29
Volume Adjustment ...........................................29
Quick Menu .......................................................30
Home Menu .......................................................31
On Screen Menus Selection and adjustment ...32
Auto programme tuning ...................................34
Manual programme Tuning ...............................35
Programme Edit ...............................................38
BOOSTER(IN AIR DIGITAL MODE) .................41
Software Update ...............................................42
Picture/Sound test .............................................44
Signal Test .........................................................45
Product/service information...............................46
Network Test ......................................................46
Simple Manual ..................................................47
Selecting the Programme List ...........................48
Selecting the favourite Programme List ............49
Input List ............................................................50
Input Label ........................................................51
SIMPLINK ..........................................................52
AV Mode ............................................................55
Initializing(Reset to original factory settings) ....56
NETCAST
NETCAST Menu
Legal Notice ......................................................57
..................................................59
YOUTUBE.........................................................60
ACCUWEATHER..............................................62
PICASA ........................................................... .63
TO USE THE 3D VIDEO
3D Video ............................................................65
Caution when using 3D Glasses.......................66
3D Video Viewing Range ...................................66
Watching the 3D Video .....................................67
II
CONTENTS
CONTENTS
TO USE A USB OR PC DEVICE
ENTRY MODE ..................................................69
Connection Method ...........................................70
DLNA .................................................................72
Movie list ...........................................................76
Photo list ............................................................85
Music list ............................................................93
99
DivX Registration Code .....................................
Deactivation .....................................................100
GAME/SCHEDULE
World Time ......................................................101
Schedule .........................................................102
Game ..............................................................104
EPG(ELECTRONIC PROGRAMME
GUIDE)(IN DIGITAL SIGNAL)
EPG(Electronic programme guide) .................105
Manual Timer ..................................................107
Extended Description ......................................108
Schedule List ...................................................109
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ................110
Picture Wizard .................................................112
Energy Saving .................................................113
Preset Picture Settings ...................................114
Manual Picture Adjustment .............................115
Picture Improvement Technolo
gy ....................116
Expert Picture Control .....................................117
Picture Reset ...................................................120
TruMotion ........................................................121
LED LOCAL DIMMING ...................................122
Power Indicator ...............................................123
MHEG Guide ...............................................123
Mode Setting ...................................................124
Demo Mode ....................................................
.125
SOUND & LANGUAGE CONTROL
Auto Volume Leveler .......................................126
Clear Voice II ...................................................127
Preset Sound Settings-Sound Mode ..............128
Sound Setting Adjustment -User Mode ..........129
Infinite Sound ..................................................129
Balance ...........................................................130
TV Speakers On/ Off Setup ............................131
DTV Audio Setting (in digital mode only) ........132
Selecting Digital Audio out ..............................133
Audio Reset .....................................................134
Stereo/Dual Reception (In Analogue Mode Only)...
135
NICAM Reception (In Analogue Mode Only)...
...... 136
Speaker Sound Output Selection ................ 136
ON-SCREEN MENU LANGUAGE/COUNTRY/
AREA SELECTION .........................................137
Language Selection ........................................13
8
TIME SETTING
Clock Setup .....................................................140
Auto on/off time setting ...................................141
Sleep Timer setting .........................................142
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................143
Block Programme ............................................144
External Input Blocking ...................................145
Key Lock..........................................................146
APPENDIX
Troubleshooting ...............................................151
Maintenance ....................................................153
Product Specifications ...................................154
IR Codes .........................................................155
External Control Device Setup ........................156
Open source software notice ..........................163
TELETEXT
Switch on/off ...................................................147
SIMPLE Text....................................................147
TOP Text..........................................................148
FASTEXT ........................................................148
Special Teletext Functions ..............................149
DIGITAL TELETEXT
Teletext Within Digital Service .......................150
Teletext In Digital Service...............................150
A-1
PREPARATION
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
Image shown may differ from your TV.
Owner’s Manual
Nero MediaHome
4 Essentials CD
Batteries
(AAA
x 2
AA x
2)
Polishing Cloth
Polishing cloth for
use on the screen.
This item is not included for all models.
* Lightly wipe any stains or
fingerprints on the surface
of the TV with the polish-
ing cloth.
Do not use excessive
force. This may cause
scratching or discoloura-
tion.
Remote Control
LIGHT
[
AD APP/
*
w
x 4
MUTE
OK
P
Motion Remote Control Strap
AV MODE
LIGHT
INPUT
TV/
RAD
ENERGY SAVING
1 2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
[
9
WXYZ
BACK
EXIT
OK
LIST
Q.VIEW
MENU
Q.MENU
GUID E
AD APP/
*
INFO
MARK
3D
MUTE
FAV
DELETE
CHAR/NUM
P
P
A
G
E
w
RATIO
L/R SELECT
3D Glasses
x 2
Stand Rear Cover
Cable Holder
Component gender cable,
AV gender cable
x 2
(M4x12)
x 4
x 4
(M4x22)
Bolts for stand assembly
A-2
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
Image shown may differ from your TV.
NOTE
TV can be placed in standby mode in order to reduce the power consumption.
The energy consumed during use can be significantly reduced if the level of
brightness of the picture is reduced, and this will reduce the overall running cost.
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
SPEAKER
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.)
Emitter
It is the part equipped with the
emitter exchanging signal with 3D
glasses.
Please be careful not to block the
screen with objects or people
while watching a 3D Video.
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
PREPARATION
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The volt-
age is indicated on the Specifications page.
(
p.154) Never attempt to operate the TV
on DC power.
LAN
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of
equipment.
Connect to a Digital Audio Component.
Use an Optical audio cable.
RGB/DVI Audio Input
Component Input
Connect a component video/audio device to
these jacks.
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI
(VIDEO) signal to HDMI/DVI port with DVI to
HDMI cable.
RGB IN Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
WIRELESS Control
Connect the Wireless Dongle to the TV to
control the external input devices connected
to Media Box wirelessly.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Antenna Input
Connect antenna to this jack.
Cable Input
Connect cable signals to this jack.
USB Input
Connect USB storage device to this jack.
1
2
3
4
5
6
8
9
10
11
12
13
13
1
2
3
HDMI/DVI IN
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
(DVI)
1
2
ANTENNA
IN
CABLE
IN
USB IN 2
H/P
USB IN 1
HDMI
IN 4
AV IN2
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B PR
1
P
OK
INPUT
MENU
INPUT
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
(DVI)
1
2
ANTENNA
IN
CABLE
IN
USB IN 2USB IN 1
HDMI
IN 4
AV IN2
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B PR
1
432
5
10
11 12
5
1
7
CAUTION
Use a product with the fol-
lowing thickness for optimal
connection to HDMI cable
(Only HDMI IN 4) / USB
device.
*A 10 mm
WIRELESS
CONTROL
10
Connect the audio from a PC.
8
7
6
9
6
A-3
BACK PANEL INFORMATION
A-4
PREPARATION
PREPARATION
STAND INSTALLATION
Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force,
the bolt can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
1
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
2
Stand Body
Stand Base
Fix the 4 bolts securely using the holes in
the back of the TV.
3
Assemble the parts of the Stand Rear
Cover with the TV.
4
M4 X 22
M4 X 12
Stand Rear
Cover
A-5
PREPARATION
SWIVEL STAND
Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
BACK COVER FOR
WIRE ARRANGEMENT
* Note
You can also use the cable management
structure in the rear cover to manage
the cables as show bellowing.
1
Securethe■powercordwith■the■Cable
Holder on■the■TVbackcover.
It■willhelp■preventthe■power■cable■from■
being■removedby■accident.
After■connectingthe■cables■as■necessary,
install■Cable Holderas■shown■and■bundle
thecables.
2
Cable Holder
Cable Holder
CABLE MANAGEMENT
A-6
PREPARATION
PREPARATION
This feature is not available for all models.
Image shown may differ from your TV.
KENSINGTON SECURITY
SYSTEM
CAREFUL INSTALLATION
ADVICE
You should purchase necessary components
to fix the TV safety and secure to the wall on
the market.
Position the TV close to the wall to avoid the
possibility of it falling when pushed.
The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid-
ing the possibility of it falling forwards if pulled.
This will prevent the TV from falling forward
and causing injury. This will also prevent the
TV from damage. Ensure that children do not
climb or hang from the TV.
3
Use the eye-bolts or TV brackets/bolts to fix the
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then
bolts.)
* Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
wall. Match the height of the bracket that is
mounted on the wall.
Use a sturdy rope to tie the product for align-
ment. It is safer to tie the rope so it becomes
horizontal between the wall and the product.
2
2
1
1
The TV is equipped with a Kensington Security
System connector on the back panel. Connect
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
For further information, contact http://www.kens-
ington.com, the internet homepage of the
Kensington
company. Kensington sells security systems for
expensive electronic equipment such as note-
book PCs and LCD projectors.
1
2
3
NOTE
When moving the TV undo the cords first.
Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the
same.
NOTE
The Kensington Security System is an optional
accessory.
If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on.
This is normal
, there is nothing wrong with TV.
Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortio
n
effects on the screen.
PREPARATION
Model
VESA
(A
*
B)
Standard
Screw
Quantity
47LX9
***
55LX9
***
200 * 200
400 * 400
M6
M6
4
4
The TV can be installed in various ways such as
on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power
Supply
Circuit
breaker
EARTHING
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to tele-
phone wires, lightening rods or gas pipes.
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
LG recommends that wall mounting be per-
formed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
10 cm
NOTE
Should Install wall mount on a solid wall per-
pendicular to the floor.
Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup-
port the weight of TV set; e.g. concrete, nat-
ural rock, brick and hollow block.
Installing screw type and length depends on
the wall mount used. Further information,
refer to the instructions included with the
mount.
LG is not liable for any accidents or damage
to property or TV due to incorrect installa-
tion:
- Where a non-compliant VESA wall mount
is used.
- Incorrect fastening of screws to surface
which may cause TV to fall and cause per-
sonal injury.
- Not following the recommended Installation
method.
DESKTOP PEDESTAL
INSTALLATION
10 cm
For adequate ventilation allow a clearance of 10
cm all around the TV.
10 cm
10 cm
10 cm
Image shown may differ from your TV.
A-7
AA
BB
A-8
PREPARATION
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
Adjust the Energy Saving mode of the TV.
It helps you select and set images and sounds
when connecting AV devices.
External input mode rotate in regular sequence.
Selects Radio, TV and DTV channel.
Selects a menu.
Clears all on-screen displays and returns to TV
viewing from any menu.
(
p.32 to 33)
Select the desired quick menu source. (Aspect
Ratio, Clear Voice II , Picture Mode, Sound Mode,
Audio (or Audio Language), Sleep Timer, Skip Off/
On, USB Device).
Allows the user to move return one step in an inter
-
active application, EPG or other user interaction
function.
Clears all on-screen displays and returns to TV
viewing from any menu.
dna sunem neercs-no eht etagivan ot uoy swollA
adjust the system settings to your preference.
Accepts your selection or displays the current mode.
MENU
Q. MENU
BACK
EXIT
THUMBSTICK
(Up/Down/Left/Right)
OK
SIMPLINK /
MY MEDIA
Menu
control buttons
RATIO
Controls SIMPLINK or MY MEDIA menu (Photo List,
Music List and Movie List).
Selects your desired Aspect Ratio of picture.
(
p.110
)
Select the desired NETCAST menu source.
(AccuWeather, Picasa, YouTube etc.)
Switches the TV on from standby or on to standby.
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
1 2 ABC 3 DEF
4 GHI 5 JKL 6
MNO
7
PQRS
8 TUV
0
9
WXYZ
BACK
EXIT
OK
LIST
Q.VIEW
MENU
Q.MENU
GUIDE
INFO
FAV
3D
MUTE
MARK
DELETE
CHAR/NUM
P
P
A
G
E
RATIO
L/R SELECT
T.OPT
TEXT
Shows programme guide.(
p.105
)
GUIDE
PREPARATION
LIGHT
[
AD APP/
*
w
Installing Batteries
Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
Install two 1.5V AAA batteries. Do not mix old or used batter-
ies with new ones.
Close cover.
To remove the batteries, perform the installation actions in
reverse.
Coloured
buttons
L/R SELECT
These buttons are used for teletext (on TELETEXT
models only), Programme edit.
Use this to view the 3D video. (► p.67)
0~9 number
button
LIST
Q.VIEW
Selects a programme.
Selects numbered items in a menu.
Displays the programme table.
Returns to the previously viewed programme.
VOLUME UP
/DOWN
FAV
MARK
3D
CHAR/NUM
MUTE
DELETE
Programme
UP/DOWN
PAGE UP/
DOWN
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard
settings.
Check and un-check programmes in the USB
menu.
Use this to view the 3D video.
(
p.67)
Shifts the Character or Number for NetCast menu.
Switches the sound on or off.
Deletes the entered character when entering the
character on the screen keyboard.
Selects a programme.
Move from one full set of screen information to the
next one.
1
DIGITAL These buttons are used for digital teletext.
TELETEXT
For further details, see the ‘Digital Teletext’ sectio
n.(
p.147
)
T.OPT
TEXT
1
AV MODE INPUT
TV/
RAD
ENERGY
SAVING
1 2 ABC 3 DEF
4 GHI 5 JKL 6
MNO
7
PQRS
8 TUV
0
9
WXYZ
BACK
EXIT
OK
LIST
Q.VIEW
MENU
Q.MENU
GUIDE
INFO
FAV
3D
MUTE
MARK
DELETE
CHAR/NUM
P
P
A
G
E
RATIO
L/R SELECT
INFO i
Shows the present screen information.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.
A-9
A-10
PREPARATION
PREPARATION
MUTE
OK
P
Adjusts the volume.
Selects a programme.
Switches the sound on or off.
VOLUME UP
/DOWN
Programme
UP/DOWN
MUTE
MAGIC MOTION REMOTE CONTROL KEY FUNCTIONS
Blinks the light when operating.
Pointer
Receiver
Switches the TV on from standby or off to standby.
POWER
Appears the pointer.
OK/
HOME MENU
When the message "Magic motion
remote control battery is low.
Change the battery." is displayed,
replace the battery.
Open the battery compartment
cover on the back and install the
batteries matching correct polari-
ty (+with +,-with -).
Install two 1.5 V AA batteries. Do
not mix old or used batteries
with new ones.
Close cover.
To remove the batteries, perform
the installation actions in
reverse.
Installing Batteries
1
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the
devices.
Antenna
UHF
Signal
Amplifier
VHF
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
(DVI)
1
2
CABLE
IN
USB IN 2
H/P
USB IN 1
HDMI
IN 4
AV IN2
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B PR
1
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
(DVI)
1
2
ANTENNA
CABLE
IN
USB IN 2
H/P
USB IN 1
HDMI
IN 4
AV IN2
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B
P
R
1
Wall
Antenna
Socket
RF Coaxial Wire (75 ohm)
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
CABLE
IN
ANTENNA
IN
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A COMPONENT CABLE
To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
Image shown may differ from your TV.
This TV
can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
HDMI Audio Supported format : Dolby Digital, PCM.
DTS Audio format is not supported.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50 Hz / 60 Hz only)
O
(24 Hz / 30 Hz /
50 Hz / 60 Hz)
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y P
B PR
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
1
Connect the video outputs
(
Y, PB, PR
)
of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
2
Connect the audio output of the external equip-
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
3
Turn on the external equipment.
(
Refer to the external equipment's manual for
operating instructions.)
4
Select the Component1 input source using the
INPUT button on the remote control.
If connected to COMPONENT IN 2, select
Component2 input source.
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENNA
IN
CABLE
IN
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
ANTENNA
IN
CABLE
IN
1
1
2
3
HDMI/DVI IN
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
ANTENNA
IN
CABLE
IN
1
1
1
2
USB IN 2USB IN 1
HDMI
IN 4
AV IN2
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B PR
1
2
or
WIRELESS
CONTROL
*COMPONENT IN2 jack is just composed by an
integrated video jack and an integrated audio
jack. And the integrated audio jack also can be
used as the AV IN2 jack.
Once you connected the integrated audio jack,
the AV2 connection remind OSD will display,
if you just need it as the component Audio jack,
please choose No.
2
EXTERNAL EQUIPMENT SETUP
3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
NOTE
The TV can receive video and audio signals simultaneously
when using an HDMI cable.
If the DVD does not support Auto HDMI, you must set the
output resolution appropriately.
Check that your HDMI cable is High Speed HDMI Cable. If
the HDMI cables are not High Speed HDMI Cable, flickering
or no screen display can result. Please use the High Speed
HDMI Cable.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2, HDMI/
DVI IN 3 or HDMI IN 4 jack on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for operating
instructions.)
3
Select HDMI1, HDMI2, HDMI3 or HDMI4 input source using the
INPUT button on the remote control.
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENNA
IN
CABLE
IN
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENNA
IN
CABLE
IN
1
2
3
HDMI/DVI IN
1
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI TO DVI CABLE
1
Connect the digital set-top box or the DVI out-
put of the PC to HDMI/DVI IN 1 jack on the
TV.
2
Connect the audio output of the digital set-top
box or the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the digital set-top box or the PC and
the TV.
(
Refer to the digital set-top box or the PC
manual for operating instructions.)
4
Select HDMI1 input source using the INPUT
button on the remote control.
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENNA
IN
CABLE
IN
1
2
3
HDMI/DVI IN
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENNA
IN
CABLE
IN
1
2
3
HDMI/DVI IN
1 2
or
WIRELESS
CONTROL
4
EXTERNAL EQUIPMENT SETUP
5
EXTERNAL EQUIPMENT SETUP
USB SETUP
1
Connect the USB device to the USB IN 1 or
USB IN 2 jack on the TV.
2
After connecting the USB IN 1 or USB IN 2
jack, you use the USB function. (
p.69)
CONNECTING WITH AN RF CABLE
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
1
Connect the ANT OUT socket of the VCR to
the ANTENNA IN / CABLE IN socket on the
TV.
2
Connect the antenna cable to the ANT IN
socket of the VCR.
3
Press the PLAY button on the VCR and match
the appropriate channel between the TV and
VCR for viewing.
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
CABLE
IN
ANTENNA
IN
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENNA
IN
CABLE
IN
Wall Jack
Antenna
1
2
USB IN 2
H/P
USB IN 1
HDMI
IN 4
AV IN2
VIDEO / AUDIO
COMPONENT IN2
AUDIO / Y P
B
P
R
1
or
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
CABLE
IN
ANTENNA
IN
1
2
3
HDMI/DVI IN
CONTROL
L(MONO)
R
AUDIO
VIDEO
AV IN 1
LAN
1
1
ANTENN
A
IN
CABLE
IN
Wall Jack
Antenna
1
2
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN RCA CABLE
NOTE
If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
1
Connect the AUDIO/VIDEO jacks between TV
and VCR or external equipment. Match the
jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
2
Insert a video tape into the VCR and press
PLAY on the VCR.
(
Refer to the VCR owner’s
manual.
)
Or, Operate the corresponding external equip-
ment.
(Refer to external equipment operating guide.)
3
Select AV1 input source using the INPUT but-
ton on the remote control.
If connected to AV IN 2, select AV2 input
source.
1
2
3
HDMI/DVI IN
LAN
1
1
ANTENNA
IN
CABLE
IN
L(MONO)
R
AUDIO
VIDEO
AV IN 1
1
Camcorder
Video Game Set
or
USB IN 2USB IN 1
HDMI
IN 4
COMPONENT IN2
AUDIO / Y P
B PR
AV IN2
VIDEO / AUDIO
Camcorder
Video Game Set
or
or
1
WIRELESS
CONTROL
6
EXTERNAL EQUIPMENT SETUP
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193

LG 47LX9550 User guide

Category
LCD TVs
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI