Ferm PDM1028 User manual

Art. No. PDM1028

FDD-500

www.ferm.com

GB

D

NL

F

E

P

I

S

FIN

N

DK

USERS MANUAL 04

GEBRAUCHSANWEISUNG 09

GEBRUIKSAANWIJZING 14

MODE D’EMPLOI 19

MANUAL DE INSTRUCCIONES 24

MANUAL DE INSTRUÇÕES 29

MANUALE UTILIZZATI 34

BRUKSANVISNING 39

KÄYTTÖOHJE 44

BRUKSANVISNING 49

BRUGERVEJLEDNING 54

www.ferm.com 0706-11.1

GB Subject to change

D Änderungen vorbehalten

NL Wijzigingen voorbehouden

F Sous réserve de modifications

E Reservado el derecho de

modificaciones técnicas

P Reservado o direito a modificações

I Con riserva di modifiche

S Ändringar förbehålles

FIN Pidätämme oikeuden muutoksiin

N Rett till endringer forbeholdes

DK Ret til ændringer forbeholdes

Page is loading ...

Ferm 03

D

NL

F

E

P

I

S

SF

N

DK

62 Ferm

Spare parts list

Position Description No.

2 Locator 400861

5 Bitholder 408839

7 Socket 400862

12 Bearing 608ZZ 800608

14 Hook 400863

16 Armature 400864

19 Stator 400865

25 Carbon brush 400866

28 Switch 400867

UK

D

NL

F

E

P

I

S

SF

N

DK

5

3

4

Fig.4

Ferm 61

UK

D

NL

F

E

P

I

S

SF

N

DK

04 Ferm

DRYWALLSCREWDRIVER

The numbers in the following text correspond with the pictures at pages 2 - 3

Read this operators guide carefully, before using the machine. Ensure that you

know how the machine works, and how it should be operated. Maintain the

machine in accordance with the instructions, and make certain that the machine

functions correctly. Keep this operator’s guide and other enclosed documentation

with the machine.

Introduction

The machine is intended for tightening and loosening screws.

Contents

1. Machine data

2. Safety instructions

3. Assembly

4. Use

5. Service & maintenance

Technical specifications

Features

Fig. 1

1. Bit holder

2. Adjustment collar

3. On/off switch

4. Switch lock

5. Left/right switch

6. Belt hook

Voltage 230 V~

Frequency 50 Hz

Input power 500 W

No load speed/min 0 - 4000/min

Weight 1.7 kg

Lpa (sound pressure) 78 dB(A)

Lwa (sound power) 89 dB(A)

Vibration value 1.85 m/s

2

1. MACHINE DATA

GB

Ferm 05

Contents of packing

1 Drywall screwdriver

1 Safety instructions

1 Instruction manual

1 Warranty card

Explanation of symbols

In this manual and/or on the machine the following symbols are used:

Read instructions carefully

In accordance with essential applicable safety standards of European directives

Class II machine – Double insulation – You don’t need any earthed plug.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates electrical shock hazard.

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Variable speed control

Immediately unplug the plug from the mains electricity in the case that the cord

gets damaged and during maintenance

Wear a dust mask. Working with wood, metals and other materials may produce

dust that is harmful to health. Do not work with material containing asbestos!

Wear ear and eye protection

Specific safety instructions

• First switch of the machine before you move the machine downwards along your body.

• For long hair, wear hair protection. Work only with closely fitting clothes.

2. SAFETY INSTRUCTIONS

GB

D

NL

F

E

P

I

S

SF

N

DK

60 Ferm

UK

D

NL

F

E

P

I

S

SF

N

DK

Ferm 59

UK

D

NL

F

E

P

I

S

SF

N

DK

06 Ferm

Electrical safety

• Do not use extension cables which are too long. Use extension cables with a core diameter

of 1,5 mm

2

minimal and only when the cable is rolled out completely.

• Keep the mains cable away from moving parts of the machine.

• Throw away old cables or plugs when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in the wall outlet.

Warning: Prior to mounting an accessory always unplug the tool.

Changing a bit

Fig. 2

The bits can easily be placed directly into the bit holder.

Two options to reach the bit:

1. Rotate the adjustment collar clockwise to minimum screwing depth, so the bit comes out of

the machine. See also description “Depth stop”.

2. Remove the adjustment collar by rotating it counterclockwise until the collar comes free

and can be removed. The bit is now easily reachable and can be replaced.

The On/Off switch

Fig. 4

Switch the machine on by pressing the triggerswitch (3). When you release the triggerswitch (3)

the machine will turn off.

Switch-lock

You can lock the On/Off switch by pressing the triggerswitch (3) and then pressing knob (4).

Release the switch-lock by pressing the triggerswitch (3) shortly.

Switching the direction of rotation

• Direction of rotation counter-clockwise: shift switch (5) to “L”

• Direction of rotation clockwise: shift switch (5) to “R”.

Depth stop

Fig. 3

With the adjustment collar the screwing depth of the screw head in the material can be

preselected in several steps.

• Slide the adjustment collar in forward direction and set the screwing depth by rotating the

adjustment collar.

• Rotating the adjustment collar clockwise will increase the screwing depth.

• Rotating the adjustment collar counterclockwise will decrease the screwing depth.

4. USE

3. ASSEMBLY

GB

D

NL

F

E

P

I

S

SF

N

DK

Ferm 07

• Slide the adjustment collar backward again to block the collar.

User tips

• First do a trial screw driving to require the best setting of the depth stop

• The machine can be carried on a belt with help of the belt hook: the user can use both

hands and the machine is always at hand.

Make sure that the machine is not live when carrying out maintenance work on the

motor.

The machines have been designed to operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation depends upon proper machine care and

regular cleaning.

Cleaning

Clean the housing regularly with a soft cloth, preferably every time it is used. Keep the

ventilating apertures free from dust and dirt. Remove stubborn dirt with a soft rag moistened in

soapy water. Do not use any solvents such as petrol, alcohol, ammonia, etc. as such

substances can damage the plastic parts.

Lubrication

The appliance does not need any extra lubrication.

Faults

Should a fault occur, e.g. after wear of a part, please contact the service address on the

warranty card. In the back of this manual you find an exploded view showing the parts that can

be ordered.

Environment

To prevent damage during transport, the appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore please make use of options for recycling the

packaging.

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Warranty

The guarantee conditions can be found on the separately enclosed guarantee card.

5.SERVICE & MAINTENANCE

GB

D

NL

F

E

P

I

S

SF

N

DK

58 Ferm

Vi erklærer herved, udelukkende på eget ansvar, at dette

FDD-500

opfylder følgende standarder eller standardiserede dokumenter

EN60745-1, EN60745-2-2, EN55014-1, EN55104-2, EN61000-3-2, EN61000-3-3

i henhold til følgende direktiver:

98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC

01-06-2006

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

(

CE

KONFORMITETSERKLÆRING (DK)

UK

D

NL

F

E

P

I

S

SF

N

DK

Page is loading ...

Ferm PDM1028 User manual

Ferm PDM1028 User manual

in other languages

Related papers

Other documents