Zanussi ZRA237CWO User manual

Type
User manual

This manual is also suitable for

Zanussi ZRA237CWO is a high-quality refrigerator that offers a range of features to keep your food fresh and organized. With its adjustable shelves and spacious compartments, you can easily customize the interior to fit your needs. The ZRA237CWO also features a reversible door, so you can choose which way it opens to best fit your kitchen layout.

Zanussi ZRA237CWO is a high-quality refrigerator that offers a range of features to keep your food fresh and organized. With its adjustable shelves and spacious compartments, you can easily customize the interior to fit your needs. The ZRA237CWO also features a reversible door, so you can choose which way it opens to best fit your kitchen layout.

6
1
3
3
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate correspond
to your domestic power supply.
Voltage can vary by ±6% of the rated voltage. For
operation with different voltages, a suitably sized auto-
transformer must be used.
The appliance must be earthed
The power supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is
not earthed, connect the appliance to a separate earth
in compliance with current regulations, consulting a
specialist technician.
The Manufacturer declines all responsibility if the
above safety precautions are not observed.
This appliance complies with the E.E.C.
Directives.
Electrical connection
2. Rotate the left and right adjustable front feet at
the bottom by hand , turning them anti-clockwise.
3. Unscrew the bolts which are used to fix the
bottom hinge with the narrow head of a spanner ,
and unscrew the bottom hinge with screwdriver , then
remove the door carefully; After that use the middle
hole of the spanner to unscrew the hinge pin and
stopper , unscrew the nut which is used to fix the
hinge pin with the wide head of a spanner and
place them in the symmetrical holes.
4. Remove the stopper which is under the bottom
door trim with a screwdriver , then install it to the
left symmetrical position.
5.Rotate the pin by using the wide-head of the
spanner and remove the left hole cover with a
screwdriver , exchange the assembly location and
fix it as the previous method.
6. Change the handle.
Remove the two side of plastic hole cover and
handle with a screwdriver , fix them on the
opposite side. Put the plastic hole covers over
were the handle was originally situated.
7. Install the door carefully , adjust assembly
position , move the hinge to left symmetrical
position , then fix it with the bolt. Then use the
bolt to fix the adjustable foot in an appropriate
location.
1
2
1.Doo r Stop
2.Doo r Stop Scr ew
Fix the stopper in the middle of the
condenser , rotate the stopper 90 degrees and fixed
the position.
1. Tilt the refrigerator back to set at an angle.
C0
9
2
1.
5
.
(08
3
B
)
-0
0
-03
2
0101
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Zanussi ZRA237CWO User manual

Type
User manual
This manual is also suitable for

Zanussi ZRA237CWO is a high-quality refrigerator that offers a range of features to keep your food fresh and organized. With its adjustable shelves and spacious compartments, you can easily customize the interior to fit your needs. The ZRA237CWO also features a reversible door, so you can choose which way it opens to best fit your kitchen layout.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI