Dynam Pitts Model 12 Red 1070mm Wingspan - BNP User manual

Dynam
Brand
Dynam
Model
Pitts Model 12 Red 1070mm Wingspan - BNP
Type
User manual

This manual is also suitable for

DECAL:
ASSEMBLY:
DY8947
Dynam RC
dynam-rc.cn
of
This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Please recycle.
over
DIRECTIONS FOR ASSEMBLY AND ADJUSTMENT
Item:8947
Servo: 9gx2pcs,17gx2pcs
Battery: 14.8V 2200mAh Li-Po, 25C
Specification:
Wingspan: 1067mm (42in)
Overall Length: 1130mm (44.5in)
Wing Loading: 43g/d
Speed Controller: 50A Brushless
Motor Size: BM3720A-KV650 Brushless Outrunner
Flying Weight: 1300g ( 45.9oz)
SPARE PART LIST:
DY-3001 Quick-controller
DY-3003 Glue
DYR-2001 2.4G Receiver
DYAT-008 Servo Horn
DY-1007 9g Servo
Pitts-12 Decal
DY8947 Sticker -01
1
2
3
4
10
6
5
9
8
7
FuselagePitts-01
Pitts-08 Landing gear set
Pitts-02 Lower wing set
Pitts-03
Upper wing set
Pitts-04 Elevator
Vertical stabilizerPitts-05
Pitts-06
spinner
Brushless Motor BM3720A-KV650
Pitts-09
Wing Struts
DYBH-1000 blade holder type A
Pitts-07
Canopy
Pitts-11 Push rod
DYP-1019 13*6 Propeller
DY-6014
14.8V 2200mAh 25C Battery
DY-1009 17g Servo
5
1
6
Connect the aileron servos with
Y wires.
Install the landing gear with
PA2.5*10mm screws.
Install the lower wing with
PA2.3*20mm screws.
Fix the landing gear cover in place
with Double-sided adhesive.
2
3
4
Fix wing strut cover with foam
glue.
Install wing struts with PA2.5*8
mm screws.
11
7
12
Fix the stabilizers with PA2.3*20
mm screw.
Install side wing struts with
M2*6mm screws.
Install tail wheel with PA2*6
mm screws.
Install tail wheel with PA2*6
mm screws.
Put the upper wing on wing
struts as shown.
8
9
10
Insert the horizontal stabilizer
and verticalstabilizer in place.
Fix the upper wing with M2*6mm
screws.
17
13
18
Install the propeller.Install rudder push rod as
shown.
Install spinner with PA2.5*8mm
screws.
Install elevator push rod as
shown.
14
15
16
Install aileron push rod as shown.Install struts for horizontal
stabilizer and vertical stabilizer.
2
4
8
6
DY8947 Sticker -01
1
2
3
4
10
6
5
9
8
7
10
3
5
9
7
1
Open the canopy
85 90
The ideal C.G. position is 85~90mm behind the
leading edge measured at where the wing meets
the fuselage.In order to obtain the C.G.
specified,add weight to the fuselage or move the
battery position. Check the C.G. before flying.
85 90
Suggest Control Throw Setting
Elevator Aileron Rudder
14.8V 2200mAh
Li-Po 25C
(13x6)
2200mAh 14.8V
25C Discharge
Lithium-polymer Battery
Rechargeable Cells
Use li-po charger only
Pitts-14 Cowl
Pitts-15 Battery cover
DY-3006
Motor Mount
Pitts-13
Plastic Tab
Pitts-16
Screw set
skylord
50A ESC
ESC-50A
ESC Skylord 50A
DTM-T006 6A Transmitter
  • Page 1 1

Dynam Pitts Model 12 Red 1070mm Wingspan - BNP User manual

Dynam
Brand
Dynam
Model
Pitts Model 12 Red 1070mm Wingspan - BNP
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents