Aquaport AQP-BRD User Manual & Warranty

Type
User Manual & Warranty
Users Manual
& Warranty
AQP-BRD
BEER CHILLER & DISPENSER
Refrigerate Beer
Keg Before Use.
MANY THANKS AND CONGRATULATIONS ON YOUR PURCHASE OF THE
AQUAPORT/NOUVE BEER DISPENSER!
We are confident that the Beer Dispenser will be of great addition and support for your
gatherings, no matter what the occasion!! Designed with the goal of keeping your choice
of beer cooled and right where you want it to be!! At the heart of the party!
That’s what’s great about the Beer Dispenser as well! It’s small and light enough that you
can have it in the TV room when the boys come over to watch the game, or to any other
room where the party is going on!
The best part though, is that you can put your favorite beer in the Dispenser and are not
limited to only a couple of brands like from other similar beer dispensers!
The Aquaport/Nouve Beer Dispenser is especially designed to fit most traditional 5ltr
gravity flow mini kegs!
Just grab you pre-cooled favourite 5ltr gravity flow keg from your refrigerator
like you always have and pop it in the Dispenser!!
Although the unit is basically self explanatory, please take a short moment to read through
the manual so you can get more familiar with your Beer Dispenser:
1. Main housing
2. Door
3. Drip tray cover
4. Drip tray
5. Lighted I/0 Switch
6. Door release handle
7. Carrying handles
8. Cord storage box
User’s Manual & Warranty
3
SAFETY INFORMATION
Intended use:
This appliance has been manufactured exclusively for dispensing beer in a domestic setting.
This appliance should only be used in accordance with the enclosed directions for use.
Check that your mains voltage corresponds to that stated on the appliance.
Never leave the appliance unsupervised when in use. Keep out of reach of children or
incompetent persons.
From time to time check the cord for damages. Never use the appliance if cord or appliance
shows any signs of damage.
Only use the appliance for domestic purposes and in the way indicated in these instructions.
Never immerse the appliance in water or any other liquid for any reason whatsoever. Never
place it into the dishwasher. Never use the appliance near hot surfaces.
Should the cord be damaged, it must be replaced by a qualified service centre. Before cleaning,
always unplug the appliance from the power supply. All repairs should be made by an authorized
service agent.
Do not use the unit in direct sunlight, and always place it in a dry environment.
Never use accessories which are not recommended by the producer. They could constitute a
danger to the user and risk to damage the appliance.
Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way.
Do not wind the cord around the appliance and do not bend it. Stand the appliance on a table
or flat surface.
Unplug the appliance when not in use.
Provide proper ventilation when using the appliance leaving a minimum space of 10cm free
around the unit.
SAVE THESE INSTRUCTIONS
4
OPERATION
Your Beer Dispenser will keep your 5ltr keg cool for an almost indefinite period. We do however
suggest that you initially cool your chosen mini-keg for at least 12 hours in your refrigerator before
placing into the Beer Dispenser. As the Dispenser is designed as a “keep cool” unit it may not chill
your beer as quickly or as cool as you might prefer. Once a pre-chilled keg has been inserted into
the running Beer Dispenser, it will maintain a nice cool temperature for your consuming pleasure!
Remember to keep your Beer Dispenser out of direct sunlight away any other direct sources
of heat.
It is recommended that the beer keg is pre-cooled in the refrigerator before being placed in the
Beer Dispenser.
1. Remove the power cord from the cord storage in the back of this unit.
2. Check that the rated voltage is the same as stated on the label on the back of the unit.
Connect the appliance to a suitable electric socket.
3. Open the door on the front of the unit by pulling the handle (7)
4. We suggest that before you place the 5ltr keg into the Beer Dispenser that you first pull out
the “tap” on the front of the keg.
To do this, please follow the directions as supplied by the vendor of your chosen beverage.
Pre-chill your 5L keg in the refrigerator before placing it
in the Beer Dispenser to allow optimum cooling of keg.
User’s Manual & Warranty
5
5. Place the chilled 5ltr keg into the opened Beer Dispenser, and close the door being sure to
align the pulled out “tap” with the opening in the door.
Turn on your Beer Dispenser by pressing the switch (8) to the “l” position. The indicator light
will illuminate, and you will hear a slight hum from unit which will indicate its operation.
6. If unit is not in use, it is recommended that you should turn off the power by pressing the
switch (8) back to “0” position and then unplug the power cord from the wall outlet and
placing it into the cord storage compartment at the rear of the unit (9).
6
CLEANING AND STORAGE
Cleaning:
Before cleaning the appliance, it is essential to turn off the main switch and then pull the plug
out of the socket.
Never immerse the appliance in water!
Do not attempt to access any internal parts of the appliance.
To clean, simply wipe this unit with a damp cloth. Do not use any scouring pads or abrasive
cleaners as these will result in scratches to the unit.
The drip tray (7) and cover (6) can be removed from the unit (either separately or together)
by lightly lifting the tray vertically from the unit. After cleaning, the tray and cover can be
locked back into place in the same manner.
Storage:
When the appliance is not used for a long period of time, remove the plug from the wall socket and
store the cable in the cord storage compartment (9) at the rear of the unit.
Store the appliance in a dry place out of children’s reach.
User’s Manual & Warranty
7
YOUR AQUAPORT 12 MONTH REPLACEMENT WARRANTY
& WARRANTY REGISTRATION
Aquaport warrants this system to the first purchaser as follows and subject to the stated
conditions:
Any fault in the system occurring with in the first 12 months from the date of purchase (3 months
commercial use) will be repaired or the unit will be replaced at our discretion.
CONDITIONS OF THIS WARRANTY
1. This appliance must be installed in accordance with the User’s Manual.
2. The Warranty extends only to repairing or replacing any component that proves to
be defective in material or workmanship.
3. The Warranty does not cover defects occasioned by misuse, alterations or accident.
4. In the unlikely event of malfunction of our product please phone our customer service
line for advice on +61 8 8354 0711 in Australia or take it to your nearest Service
Centre. Alternatively, simply return the faulty appliance to your place of purchase,
along with your purchase receipt.
To enable us to register your warranty and provide service should a problem occur, we
recommend you fill out the section below and return it to us immediately.
Please fill in and return by FAX or POST to:
Aquaport Warranty Department. FAX +618 8354 0722
POST to: P.O. Box 81, Findon, South Australia, 5023, AUSTRALIA
Please fill in and return by FAX or POST to:
Aquaport Warranty Department. FAX +618 8354 0722
POST to: P.O. Box 81, Findon, South Australia, 5023, AUSTRALIA
COPY of proof of purchase must be sent or faxed with warranty form, or warranty will not be valid.
Due to manufacturing alterations, actual product may vary slightly from that pictured. Made in China.
Aquaport Pty. Ltd.
PO Box 81, Findon, SA 5023 Australia
Telephone: +61 8 8354 0711
Facsimile: +61 8 8354 0722
Email: aquaport@aquaport.com.au
Web: www.aquaport.com.au
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Aquaport AQP-BRD User Manual & Warranty

Type
User Manual & Warranty

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI