Arjo BOLERO Quick start guide

Type
Quick start guide
08.CE.08EN_1 • 07/2020 • Page 1/2
To quickly stop lift movement
detach the battery and remove it.
Emergency stop
Apply brake: press down
Release brake: push up
Brakes
Release one of the
catches (A) and raise or lower
the side selected as backrest to
the desired angle.
Backrest
A
Raise: pump using the full range
of movement.
Manual raising and lowering
Lower: press the lowering button.
Raise: press the up arrow.
Lower: press down arrow.
Electric raising and lowering
Unplug the hand control.
Emergency high and low
1
Use a blunt object to press.
Raise: press the hole by the up
arrow.
Lower: press the hole by the
down arrow.
2
During transfer and bath:
Lower the handle bar that is
placed farthest away from
the patient’s waist.
Handlebars
QUICK REFERENCE GUIDE - FUNCTIONS
Bolero
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 08.CE.08EN_1• 07/2020 • Page 2/2
Always start from the edge of
the side strip when attaching or
detaching the mattress.
Attach mattress
1
Attach the side strip (A) round the
side of the stretcher next to the
hydraulic pillar (B).
Press and drag the palm along
the side strip to fasten.
A
2
B
Stretch the mattress and fasten
the other side strip (C).
Fix the mattress in place with the
quick grips (D).
C
D
D
3
Remove the head or foot support
(A) and undo the screws (B).
Adjustment stretcher length
1
B
A
Rotate the transfer handle (C) 180°.
Fasten the head or foot support (A)
and the screws (B).
2
B
C
A
  • Page 1 1
  • Page 2 2

Arjo BOLERO Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI