ASRock Rack D2163D4I2-2T User manual

Brand: ASRock Rack

Model: D2163D4I2-2T

Category: Servers

Type: User manual

This manual is also suitable for

D2143D4I2-2T

D2143D4I2-2T

D2163D4I2-2T

User Manual

Version 1.0

Published May 2019

Version 1.0

Published July 2020

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Rack Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished

for informational use only and subject to change without notice, and should not

be constructed as a commitment by ASRock Rack. ASRock Rack assumes no

responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock Rack does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable

for any indirect, special, incidental, or consequential damages (including damages

for loss of prots, loss of business, loss of data, interruption of business and the

like), even if ASRock Rack has been advised of the possibility of such damages

arising from any defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Rack’s Website: www.ASRockRack.com

Contact Information

If you need to contact ASRock Rack or want to know more about ASRock Rack,

you’re welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you

may contact your dealer for further information.

ASRock Rack Incorporation

6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Unique Features 5

1.4 Motherboard Layout 6

1.5 Onboard LED Indicators 8

1.6 I/O Panel 9

1.7 Block Diagram 11

Chapter 2 Installation 12

2.1 Screw Holes 12

2.2 Pre-installation Precautions 12

2.3 Installation of Memory Modules (DIMM) 13

2.4 Expansion Slots (PCI Express Slots) 15

2.5 Jumper Setup 16

2.6 Onboard Headers and Connectors 17

2.7 AC-IN / DC-IN Power Connections 22

2.8 Unit Identication purpose LED/Switch 23

2.9 Driver Installation Guide 23

2.10 Dual LAN and Teaming Operation Guide 24

2.11 M.2_SSD (NGFF) Module Installation Guide (M2_1) 25

2.12 M.2_SSD (NGFF) Module Installation Guide (M2_2) 27

Chapter 3 UEFI Setup Utility 28

3.1 Introduction 28

3.1.1 UEFI Menu Bar 28

3.1.2 Navigation Keys 29

3.2 Main Screen 30

3.3 Advanced Screen 31

3.3.1 CPU Conguration 32

3.3.2 DRAM Conguration 35

3.3.3 Chipset Conguration 36

3.3.4 Storage Conguration 39

3.3.5 ACPI Conguration 41

3.3.6 USB Conguration 42

3.3.7 Super IO Conguration 43

3.3.8 Serial Port Console Redirection 44

3.3.9 H/W Monitor 48

3.3.10 Runtime Error Logging 50

3.3.11 Instant Flash 52

3.4 Security 53

3.4.1 Key Management 54

3.5 Boot Screen 58

3.5.1 CSM(Compatibility Support Module) 60

3.6 Event Logs 62

3.7 Server Mgmt 63

3.7.1 System Event Log 64

3.7.2 BMC Network Conguration 65

3.8 Exit Screen 67

Chapter 4 Software Support 68

4.1 Install Operating System 68

4.2 Support CD Information 68

4.2.1 Running The Support CD 68

4.2.2 Drivers Menu 68

4.2.3 Utilities Menu 68

4.2.4 Contact Information 68

Chapter 5 Troubleshooting 69

5.1 Troubleshooting Procedures 69

5.2 Technical Support Procedures 71

5.3 Returning Merchandise for Service 71

D2143D4I2-2T / D2163D4I2-2T

PB 1

English

Chapter 1 Introduction

ank you for purchasing ASRock Rack D2143D4I2-2T / D2163D4I2-2T

motherboard, a reliable motherboard produced under ASRock Rack’s consistently

stringent quality control. It delivers excellent performance with robust design

conforming to ASRock Rack’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contains introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contains the conguration

guide to BIOS setup and information of the Support CD.

1.1 Package Contents

• ASRock Rack D2143D4I2-2T / D2163D4I2-2T Motherboard

(Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.02 cm x 17.02 cm)

• Quick Installation Guide

• 1 x Oculink to 4 SATA Cable (60cm)

• 1 x SATA Power Cable (80cm)

• 1 x ATX 4P to 24P Power Cable

• 1 x I/O Shield

• 2 x Screws for M.2 Sockets

If any items are missing or appear damaged, contact your authorized dealer.

Because the motherboard specications and the BIOS soware might be updated, the con-

tent of this manual will be subject to change without notice. In case any modications of

this manual occur, the updated version will be available on ASRock Rack website without

further notice. You may nd the latest memory and CPU support lists on ASRock Rack

website as well. ASRock Rack’s Website: www.ASRockRack.com

If you require technical support related to this motherboard, please visit our website for

specic information about the model you are using.

http://www.asrockrack.com/support/

2 3

English

1.2 Specications

D2143D4I2-2T / D2163D4I2-2T

MB Physical Status

Form Factor Mini-ITX

Dimension 6.7'' x 6.7'' (17.02 cm x 17.02 cm)

Processor System

CPU D2163D4I2-2T

Supports Intel® Xeon® D-2163 Processors

D2143D4I2-2T:

Supports Intel® Xeon® D-2143 Processors

Chipset Soc

System Memory

Capacity - 4 x 288-pin DDR4 DIMM slots

- Support up to 256GB DDR4 ECC RDIMM/LR DIMM

Type - Quad Channel DDR4 memory technology

- Support DDR4 ECC RDIMM/LR DIMM

Voltage 1.2V

DIMM Size per

DIMM

- R/LR DIMM: 32GB, 16GB, 8GB, 4GB

DIMM

Frequency

- ECC RDIMM: 2133/2400/2666 MHz

- LR DIMM: 2133/2400/2666 MHz

*the max speed may vary based on SoC SKU

Expansion Slot

PCIe 3.0 x 16

SLOT7: Gen3 x16 link

Storage

SATA Controller Intel® Xeon® D-2143 or D-2163: 8 x SATAIII 6.0 Gb/s from 2 x

OCulink, 2 x SATAIII 6.0 Gb/s from M.2 M-key

Ethernet

Interface 10000/1000 Mbps

LAN Controller - 2 x RJ45 10GLAN by Intel® X557-AT2

- Supports Wake-On-LAN

- Supports Energy Ecient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- LAN1 Supports NCSI

Management

BMC Controller ASPEED AST2500 : IPMI (Intelligent Platform Management

Interface) 2.0 with ikvm and vMedia support

IPMI Dedicated

GLAN 1 x Realtek RTL8211E for dedicated management LAN

Features - Watch Dog

- NMI

D2143D4I2-2T / D2163D4I2-2T

2 3

English

Graphics

Controller ASPEED AST2500

Rear Panel I/O

VGA Port D-sub x 1

Lan Port

- 2x 10GLAN RJ45(by Intel® X557-AT2 )

- 1 x RJ45 Dedicated IPMI LAN port

- LAN Ports with LED (ACT/LINK LED and SPEED LED)

UID Button 1

USB 3.0 2

Internal Connector

COM Header 1

M.2

- 1x M-Key (PCIe3.0 x4 or SATAIII 6.0 Gb/s); Supports 2242

form factor

- 1x M-Key (PCIe3.0 x4 or SATAIII 6.0 Gb/s); Supports

22110/2280 form factor

Auxiliary Panel

Header 1 (include chassis intrusion, 2 front LAN LED, System LED)

TPM Header 1 x (13-pin)

IPMB Header 1

Fan Header 1 x CPU Fan, 2 x System Fans (1 front, 1 rear) (build in CPU

active fansink)

ATX Power 1 x (4-pin) + 1 x (8-pin) support 12V DC-IN (DC-IN mode

power budget is up to 432W)

SATA Power 1 (for DC-IN mode)

*Caution: Misconnection may permanently damage the motherboard.

OCulink 4 x OCulinks support PCIe3.0 x4; 2 of OCulinks support 4

SATAIII 6Gb/s each

System BIOS

BIOS Ty pe 256Mb AMI UEFI Legal BIOS

BIOS Features

- Plug and Play (PnP)

- ACPI 1.1 Compliance Wake Up Events

- SMBIOS 2.3.1 Support

- ASRock Instant Flash

Hardware Monitor

Temperature - CPU/PCH/DDR/LAN/Storage Temperature Sensing

- MB/Card side/TR1 Temperature Sensing

Fan

- CPU/Rear/Front Fan Tachometer

- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

- CPU/Rear/Front Fan Multi-Speed Control

Voltage Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,

+1.1V,+1.0V, +BAT, 3VSB, 5VSB

4 5

English

Support OS

OS Microso® Windows®:

- Server 2012 R2 (64 bit)

- Server 2016 (64 bit)

Linux:

- RedHat Enterprise Linux Server 6.8 (64 bit) / 7.4 (64 bit)

- CentOs 6.8 (64 bit) / 7.4 (64 bit)

- SUSE Enterprise Linux Server 11 SP4 (64 bit) / 12 SP3 (64 bit)

- UBuntu 16.04 (64 bit) / 18.04 (64 bit)

- Fedora 26 (64 bit)

- FreeBSD 11.2 (64 bit)

Virtual:

- VMWare ESXi 6.5 u1

- Citrix XenServer 7.2

- Win hyper-V Server 2016

* Please refer to our website for the latest OS support list.

*On Ubuntu 16.04 (64 bit) / 18.04 (64 bit) system, Intel Raid mode only sup-

ports UEFI BOOT.

Environment

Temperature Operation temperature: 10°C ~ 35°C / Non operation

temperature: -40°C ~ 70°C

*Install a CPU Fan when the airow through the heatsink is below 2CFM.

* For detailed product information, please visit our website: http://www.asrockrack.com

is motherboard supports Wake from on Board LAN. To use this function, please make

sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager

> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is

enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard

LAN1&2 can wake up S5 under OS.

If you install Intel® LAN utility, this motherboard may fail Windows® Hardware Quality

Lab (WHQL) certication tests. If you install the drivers only, it will pass the WHQL tests.

D2143D4I2-2T / D2163D4I2-2T

4 5

English

1.3 Unique Features

ASRock Instant Flash is a BIOS ash utility embedded in Flash ROM. is conve-

nient BIOS update tool allows you to update system BIOS without entering operating

systems rst like MS-DOS or Windows®. With this utility, you can press the <F6> key

during the POST or the <F2> key to enter into the BIOS setup menu to access ASRock

Rack Instant Flash. Just launch this tool and save the new BIOS le to your USB ash

drive, oppy disk or hard drive, then you can update your BIOS only in a few clicks

without preparing an additional oppy diskette or other complicated ash utility.

Please be noted that the USB ash drive or hard drive must use FAT32/16/12 le

system.

6 7

English

1.4 Motherboard Layout

DDR4_B1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_A1 (64 bit, 288-pin module,)DDR4, Blue

17.0cm (6.7 in)

FAN2

IPMB_1

HDLED RESET

PLED PWRBTN

PANEL1

DDR4_C1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_D1 DDR4, Blue(64 bit, 288-pin module,)

PSU_SMB1

FAN1

BAT1

NUT9

M2_1

PCIE7

ME_RECOVERY1

VGA1

USB 3.0

T: USB2

B: USB1

IPMI

LAN

UID1

LAN1 LAN2

CLRMOS1

FAN3

ITX_AUX_PANEL1

COM1

TPM1

BMC

AST2500

CPU1

10GBASE-T

PHYX557

U6755

BIOS

ROM

RoHS

ATX12V3

M2_2

NUT8

ATX12V2

SATA_SGPIO1

NUT1

OCU1 OCU2

OCU3 OCU4

(NCSI)

(SATAPower)

D2143D4I2-2T / D2163D4I2-2T

6 7

English

No. Description

1 Rear Fan Connector (FAN2)

2PSU SMBus (PSU_SMB1)

3 Intelligent Platform Management Bus header (IPMB_1)

4 SATA Power Connector (DC-IN Mode) (ATX12V3)**

5 ATX 12V Power Connector (ATX12V2)

6 ATX 12V Power Connector (U6755)**

7 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

8 CPU Fan Connector (FAN1)

9 Front Fan Connector (FAN3)

10 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1)

11 SATA SGPIO Connector (SATA_SGPIO1)

12 TPM Header (TPM1)

13 Auxiliary Panel Header (ITX_AUX_PANEL1)

14 System Panel Header (PANEL1)

15 ME Recovery Jumper (ME_RECOVERY1)

16 OCuLink x4 Connector (OCU2)

17 OCuLink x4 Connector (OCU4)

18 OCuLink x4 Connector (OCU1)

19 Clear CMOS Pad (CLRMOS1)

20 OCuLink x4 Connector (OCU3)

21 COM Port Header (COM1)

22 M.2 Socket (M2_2) (Type 2242)

23 M.2 Socket (M2_1) (Type 2280/22110)

*For DIMM installation and conguration instructions, please see p.13 (Installation of Memory Modules

(DIMM)) for more details.

**Caution: Misconnection between the ATX12V3 and the U6755 connectors may permanently damage the

motherboard.

8 9

English

1.5 Onboard LED Indicators

DDR4_B1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_A1 (64 bit, 288-pin module,)DDR4, Blue

HDLED RESET

PLED PWRBTN

DDR4_C1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_D1 DDR4, Blue(64 bit, 288-pin module,)

PCIE7

UID1

BMC

AST2500

RoHS

FAN2

FAN1

FAN3

No. Item Status Description

1LED_FAN2 Amber FAN2 failed

2 SB_PWR1 Green STB PWR ready

3LED_FAN1 Amber FAN1 failed

4LED_FAN3 Amber FAN3 failed

5BMC_LED1 Green BMC heartbeat LED

D2143D4I2-2T / D2163D4I2-2T

8 9

English

1.6 I/O Panel

No. Description No. Description

1VGA Port (VGA1) 4 10G LAN RJ-45 Port (LAN1)**

2 USB 3.0 Ports (USB3_12) 5 10G LAN RJ-45 Port (LAN2)**

3 Dedicated IPMI LAN Port* 6 UID Switch/LED (UID1)

LAN Port LED Indications

*ere are two LED next to the LAN port. Please refer to the table below for the LAN port

LED indications.

Dedicated IPMI LAN Port LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O No Link

Blinking Yellow Data Activity O 10M bps connection

On Link Yel low 100M bps connection

Green 1G bps connection

ACT/LINK LED

SPEED LED

LAN Port

10 11

English

**ere are two LEDs on each LAN port. Please refer to the table below for the LAN port

LED indications.

10G LAN Port (LAN3, LAN4) LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 100Mbps connection or

no link

Blinking Yellow Data Activity Yellow 1Gbps connection

On Link Green 10Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

SPEED LED

ACT/LINK LED

D2143D4I2-2T / D2163D4I2-2T

10 11

English

1.7 Block Diagram

12 13

English

Chapter 2 Installation

This is a Mini-ITX form factor (6.7'' x 6.7'', 17.0 cm x 17.0 cm) motherboard. Before

you install the motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the chassis.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components or

change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the motherboard’s components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use a

grounded wrist strap or touch a safety grounded object before you handle the compo-

nents.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in

the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard to the chassis,

please do not over-tighten the screws! Doing so may damage the motherboard.

Make sure to unplug the power cord before installing or removing the motherboard. Failure

to do so may cause physical injuries to you and damages to motherboard components.

Do not over-tighten the screws! Doing so may damage the motherboard.

Before you install or remove any component, ensure that the power is switched o or the

power cord is detached from the power supply. Failure to do so may cause severe damage to

the motherboard, peripherals, and/or components.

D2143D4I2-2T / D2163D4I2-2T

12 13

English

2.3 Installation of Memory Modules (DIMM)

is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and

supports Dual / Quad Channel Memory Technology.

Dual / Quad Channel Memory Conguration

Priority DDR4_A1

(Blue)

DDR4_B1

(Blue)

DDR4_C1

(Blue)

DDR4_D1

(Blue)

1Populated Populated

2Populated Populated Populated Populated

*Since installing three memory modules is NOT supported on this motherboard, we suggest not using

this conguration.

1. For dual channel conguration, you always need to install identical (the same brand,

speed, size and chip-type) DDR4 DIMM pairs.

2. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;

otherwise, this motherboard and DIMM may be damaged.

3. Please install the memory module on CH0_A1 for the rst priority.

4. To activate Dual Channel Memory Technology, please follow the “Dual Channel Memory

Conguration” table below.

e DIMM only ts in one correct orientation. It will cause permanent damage to the

motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

14 15

English

Page is loading ...

ASRock Rack D2163D4I2-2T User manual

Brand: ASRock Rack

Model: D2163D4I2-2T

Category: Servers

Type: User manual

This manual is also suitable for

D2143D4I2-2T

Download PDF

report

ASRock Rack D2163D4I2-2T User manual

This manual is also suitable for

ASRock Rack D2163D4I2-2T User manual

Related papers

Other documents