Product Introduction
6
1. Product Introduction
1.1 Overview
Aquam8512A includes a series of high-performance managed industrial Ethernet switches
applied in the rail transportation industry. Aquam8512A conforms to EN50155, EN50121
and other industrial standards. The switch is a layer 3 switch that supports the layer 3 routing
protocol, and MSTP, RSTP, DT-Ring, IEC62439-6 redundancy protocols, guaranteeing the
reliable operation of the system.
1.2 Software Features
This series switches provide abundant software features, satisfying customers' various
requirements.
Redundancy protocols: STP/RSTP, MSTP, DT-Ring, VRRP, and IEC62439-6
Routing protocols: OSPFv2, static routing protocol, RIP
Multicast protocols: IGMP Snooping, GMRP, IGMP, PIM-SM and static multicast
Switching attributes: VLAN, PVLAN, QoS, and ARP
Bandwidth management: port channel, port rate limiting, and port storm suppression
Synchronization protocols: SNTP, NTP
Security: IEEE802.1x, TACACS+, RADIUS, SSH, SSL, MAC address binding, port
isolation, and user management
Device management: FTP/TFTP/SFTP software update, FTP/TFTP/SFTP file
transmission, log record and upload
Device diagnosis: port mirroring, LLDP, link check, Virtual Cable Tester, loop detect, and
CRC protect
Alarm function: Mem and CPU Usage Alarm, port LinkDown alarm, power alarm, ring
alarm, high-temperature alarm, low-temperature alarm, port traffic alarm, and Alarm
about CRC/Pkt Loss.
Network management: management by CLI, Telnet, Web and Kyvision network