2. Canvas
  3. Evanston Slim Wardrobe

Canvas Evanston Slim Wardrobe Owner's manual

  • Hello! I've reviewed the assembly instructions for the CANVAS Evanston Slim Wardrobe, model 168-0180-2. This document details the process of assembling the wardrobe, including steps for attaching the panels, installing slides, adding drawers and mounting the door. I'm here to answer your questions regarding this product and its assembly.
  • What tools are required for assembly?
    What is the maximum weight capacity for a drawer?
    What is the maximum weight capacity for a shelf?
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
EVANSTON SLIM WARDROBE
PRODUCT NO. 168-0180-2
To the trend seekers and design mavens.
CANVASTM is the furniture and décor brand
that helps you imagine and create a space
you can be proud of.
That's because CANVASTM offers style with
ease with products that are made for real life
and Canadian inspired.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVASTM products
to life. We can't wait to see!
Parts List 4
Before You Begin Assembly 9
Step-by-step Guide 10
Tip Restraint 32
Adjust Door 34
Adjust Levellers 35
Technical Data 36
Caring for Your Item 37
Warranty Information 38
TABLE OF CONTENTS
TOOLS REQUIRED
esaelP • read and understand this entire manual before attempting to assemble,
operate, or install the product.
ynA • assembly or maintenance of the product must be carried out by adults only.
emoS • parts may contain sharp edges. Wear protective gloves if necessary.
oT • prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
euD • to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE PRODUCT.
Power drill
(Not provided)
Level
(Not provided)
Screwdriver
(Not provided)
Mallet
(Not provided)
2 people
NOTE: Do not over-drill.
Be aware of over-drilling.
EVANSTON SLIM WARDROBE4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
1Top panel 1
2Bottom panel 1
3
4
Left panel 1
5
Right panel 1
6
Back panel 1
17
Fixed shelf
Front apron
1
18Left apron
9
10
Right apron 1
11
Back apron 1
12
Drawer front panel 1
113
Drawer left panel
Drawer right panel
1
EVANSTON SLIM WARDROBE 5
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
14 Drawer back panel 1
15 Drawer bottom 1
16
17
Drawer front panel 1
18
Drawer left panel 1
19
Drawer right panel 1
320
Drawer back panel
Drawer bottom
1
221 Drawer front panel
22
23
Drawer left panel 2
24
Drawer right panel 2
25
Drawer back panel 2
Door 1
EXPLODED VIEW
1
2
3
4
H
5
6
7
8
9
10
11
12
13
14
15
16
19
20
21
24
22
23
18
17
20
20
25
24 23
21
22
EVANSTON SLIM WARDROBE6
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
ACam lock 32
BCam bolts 46
G
Handie 1
Bolt ø4 x 22 mm 2
CWood dowel 32
DHinge 4
EScrew ø4 x 14 mm 28
F
I10" slide 2
J12" slide 6
KScrew ø3.5 x 12 mm 64
LCam lock 14
MScrew ø4 x 38 mm 16
H
EVANSTON SLIM WARDROBE 7
Rod 1
EVANSTON SLIM WARDROBE8
ITEM DESCRIPTION THUMBNAIL QUANTITY
NWood dowel 2
OHanging rod support 2
T
Screw ø4 x 18 mm 2
Metal bracket 4
PCoated paper sticker 26
Q Adjustable leveller 4
RScrew ø4 x 55 mm 2
S
VNylon strap 2
UAnchor 2
HARDWARE LIST
BEFORE YOU BEGIN ASSEMBLY
?
MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and
make sure you have all tools required for assembly.
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
READ EACH STEP CAREFULLY
Make sure you understand each step. For any questions,
contact CANVAS™ customer service at 1-888-670-6684 (toll-free).
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the in front of you on a clean,
dry, level surface to protect the product as it is being built.
EVANSTON SLIM WARDROBE 9
STEP 1
JX6
IX2
EVANSTON SLIM WARDROBE10
STEP-BY-STEP GUIDE
Slides must be separated before assembly.
After separated, set aside until needed for assembly.
Push lever up, then remove runner.
Runner
Mount
Runner
Mount
Lever
STEP 2
4X1 BX12 CX8 EX4 OX2
3X1
EVANSTON SLIM WARDROBE 11
STEP-BY-STEP GUIDE
Attach 12 cam bolts B to left panel 3 and right panel 4. Do not over-tighten.
Attach two hanging rod supports O to left panel 3 and right panel 4 using
two screws E each.
Insert eight wood dowels C to left panel 3 and right panel 4.
4
C
E
O
C
B
B
B
B
B
B
C
C
C
C
3
TEAM LIFT
DO NOT LIFT ALONE
B
B
B
B
C
C
C
C
C
Attach six cam bolts B to top panel 1. Do not over-tighten.
Insert eight wood dowels C to back panel 5.
EVANSTON SLIM WARDROBE12
STEP-BY-STEP GUIDE
STEP 3
5
5
X1
1
1
X1 BX6 CX8
TEAM LIFT
DO NOT LIFT ALONE
C
Attach one 10” slide I and three 12” slides J to left panel 3 using three screws K each.
Make sure slide’s open end and slide roller face the same direction.
STEP 4
EVANSTON SLIM WARDROBE 13
STEP-BY-STEP GUIDE
KX12
3X1 JX3
IX1
3
KJ
J
J
IK
3
Mounting Holes
I
J
Plastic Slide Rail Resets
Pull Down
Mounting Holes
EVANSTON SLIM WARDROBE14
Attach one 10” slide I and three 12” slides J to right panel 4 using three screws K each.
Make sure slide’s open end and slide roller face the same direction.
STEP 5
STEP-BY-STEP GUIDE
4K
KJ
J
J
I
4X1 KX12
JX3
IX1
K
4
Mounting Holes
I
J
Plastic Slide Rail Resets
Pull Down
Mounting Holes
Attach back panel 5 and left panel 3 using four cam locks A. Tighten cam locks A.
STEP-BY-STEP GUIDE
EVANSTON SLIM WARDROBE 15
3
5
STEP 6
A
A
X4
TEAM LIFT
DO NOT LIFT ALONE
Insert four wood dowels C to fixed shelf 6. Then attach fixed shelf 6 to
left panel 3 using two cam locks A. Tighten cam locks A.
STEP-BY-STEP GUIDE
EVANSTON SLIM WARDROBE16
STEP 7
C
C
C
C
6
6
6
5
3
A
X1 CX4
AX2
Attach right panel 4 to back panel 5 and fixed shelf 6 using six cam locks A.
Tighten cam locks A.
STEP-BY-STEP GUIDE
EVANSTON SLIM WARDROBE 17
6
5
4
3
STEP 8
AX6
TEAM LIFT
DO NOT LIFT ALONE
A
STEP-BY-STEP GUIDE
EVANSTON SLIM WARDROBE18
5
STEP 9
A
A
X6 P
P
1
4
3
X4
Attach top panel 1 to left panel 3, right panel 4 and back panel 5 using six cam locks A.
Tighten cam locks A.
Cover cam locks A using four coated paper stickers P on left panel 3 and right panel 4.
A
STEP-BY-STEP GUIDE
EVANSTON SLIM WARDROBE 19
STEP 10
8X1
7
7
7
8
9
10
X1 9X1 10 X1 C
C
C
C
C
C
C
C
C
C
C
C
C
X12
8
8
9
9
10
Insert 12 wood dowels C to front apron 7, left apron 8, right apron 9 and
back apron 10, then attach front apron 7, left apron 8, right apron 9 and
back apron 10 together as shown.
STEP-BY-STEP GUIDE
EVANSTON SLIM WARDROBE20
7
2
2
X1
810
9
STEP 11
X8 BA
A
X8
Attach eight cam bolts B to bottom panel 2. Do not over-tighten.
Attach front apron 7, left apron 8, right apron 9 and back apron 10 to
bottom panel 2 using eight cam locks A. Tighten cam locks A.
2
B
B
B
/