Hikvision DS-2CC52A1P-AVPIR2 User manual

High-definition Vandal-proof Dome Camera· User Manual

0

High-definition Vandal-proof

Dome Camera

User Manual

UD.6L0201D0076A01

High-definition Vandal-proof Dome Camera· User Manual

1

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

This manual applies to the following modes:

Model

Description

DS-2CC5281P (N)-VP

600TVL 1/3”CCD Day/Night

vari-focal weather-proof

vandal-proof dome camera

DS-2CC5281P (N)-AVPIR2

600TVL 1/3”CCD IR vari-focal

weather-proof vandal-proof

dome camera

DS-2CC52A1P (N)-VP

700TVL 1/3”CCD Day/Night

vari-focal weather-proof

vandal-proof dome camera

DS-2CC52A1P (N)-AVPIR2

700TVL 1/3”CCD IR vari-focal

weather-proof vandal-proof

dome camera

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without notice.

The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the

performance or reliability of the security or signaling aspects of

this product. UL has only tested for fire, shock or casualty hazards

High-definition Vandal-proof Dome Camera· User Manual

2

as outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the

security or signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS

PRODUCT.”

0100001021109

High-definition Vandal-proof Dome Camera· User Manual

3

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC.

High-definition Vandal-proof Dome Camera· User Manual

4

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd),

lead (Pb), or mercury (Hg). For proper recycling, return the battery

to your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

High-definition Vandal-proof Dome Camera· User Manual

5

Table of Contents

1 Introduction ........................................................................7

1.1 Product Features ...................................................... 7

1.2 Overview ................................................................. 8

2 Installation..........................................................................9

2.1 Ceiling Mounting ...................................................... 9

2.2 Ceiling Mounting with a gang box ........................... 13

2.3 Wall Mounting ........................................................ 17

2.4 Side Conduit Cabling .............................................. 20

2.5 Wiring .................................................................... 21

3 Menu Operations...............................................................23

3.1 Menu Description ................................................... 23

3.2 Lens Settings ......................................................... 24

3.3 Shutter/AGC Setting .............................................. 25

3.4 White Balance Setting ............................................ 28

3.5 Backlight Setting .................................................... 30

3.6 Picture Adjust Setting............................................. 31

3.7 ATR Setting ............................................................ 32

3.8 Motion Detection Setting ........................................ 33

3.9 Privacy Mask Setting .............................................. 35

3.10 Day/Night Setting ................................................ 36

3.11 NR Setting ........................................................... 39

3.12 Camera ID Setting ............................................... 40

3.13 SYNC Setting ....................................................... 41

3.14 Language Setting ................................................. 42

3.15 Camera Reset Setting........................................... 42

3.16 Defective Pixel Correct Settings ............................ 42

3.17 Save All/Exit ........................................................ 43

High-definition Vandal-proof Dome Camera· User Manual

6

Glossary ................................................................................44

Troubleshooting ...................................................................48

Technical Maintenance ........................................................50

High-definition Vandal-proof Dome Camera· User Manual

7

1 Introduction

1.1 Product Features

This series of camera adopts high-sensitive sensor and advanced

circuit board design technology. It possesses of high resolution,

low distortion, and low noise features, etc. It is extremely suitable

for surveillance system and image process system.

The main features are as follows:

 Adopt high-performance SONY CCD, up to 700TVL

resolution, providing high definition and clear image

 OSD menu, which enables user to configure the detailed

parameters

 Support Digital Wide Dynamic Range (D-WDR) for

backlighting surveillance

 Auto-white balance with high color rendition

 High Signal Noise Ratio (SNR), which brings clear and

high-quality image

 Auto electronic shutter control to adapt to the different

surveillance environments

 Auto gain control, adaptive brightness

 Auto-iris

 Support up to 8 configurable privacy masks to ensure your

privacy

High-definition Vandal-proof Dome Camera· User Manual

8

 Advanced 3-axis design allows this dome camera to be

adjusted 0-355° horizontally and 0-75° vertically to meet

different mounting requirements

1.2 Overview

1

3

4

5

6

7

2

8

Figure 1-1 Overview

1 Black Liner

5 Power Cable

2 Lower Dome

6 Video Cable

3 AUX Interface

7 Lens

4 Menu Button

8 Adapter Ring

High-definition Vandal-proof Dome Camera· User Manual

9

2 Installation

Before you start:

Please make sure that the device in the package is in good

condition and all the assembly parts are included.

This series of camera support ceiling mounting, ceiling mounting

with a gang box, wall mounting and side conduit mounting.

2.1 Ceiling Mounting

Note:

Please make sure that the ceiling is strong enough to withstand

three times the weight of the camera.

Steps:

1. Attach the drill template (supplied) to the place where you

want to fix the camera.

2. Drill 3 screw holes and one cable hole (if you want to route the

cable through the mounting base) according to the drill

template.

High-definition Vandal-proof Dome Camera· User Manual

10

Cable Outlet

Screw Hole

Drilling Template for Outdoor

Day/Night Vandal-proof Dome Camera

Side Cable Outlet

Figure 2-1 The Drill Template

3. Loosen the screws with the supplied L-shape screwdriver to

open the lower dome.

4. Remove the black liner.

Figure 2-2 Remove the Black Liner

High-definition Vandal-proof Dome Camera· User Manual

11

Note:

If you want to install the camera to the cement ceiling, you need to

screw 3 expansion screws into the 3 drilled holes first.

5. Route the cables and connect the power supply and output the

video on a monitor.

6. Secure the dome camera to the ceiling with 3 self-tapping

screws. Refer to Figure 2-3.

Figure 2-3 Secure the Camera to the Ceiling

7. Adjust the Lens.

1). View the camera image via the monitor.

2). Loosen the lock screw besides the lens

3). Rotate the panning table to adjust the panning position of

the camera. 0 to 355° is adjustable.

High-definition Vandal-proof Dome Camera· User Manual

12

4). Rotate the tilting table to adjust the tilting position of the

camera. 0 to 75° is adjustable.

5). Rotate the lens to adjust the azimuth angle of the image. 0

to 355° is adjustable.

6). Tighten the lock screw.

7). Move the focus lever and zoom lever to adjust the focus

and the zoom.

Figure 2-4 Lens Adjustment

8. Attach the black liner back to the camera.

9. Attach the lower dome back to the camera and secure it with

the screws.

Tilt

Rotation

Pan

High-definition Vandal-proof Dome Camera· User Manual

13

Figure 2-5 Install the Black Liner and the Lower Dome

10. Remove the protection film softly to complete the installation.

Note:

Remove the protection film after the installation is completed in

case of the image problem caused by the scrape of the lower

dome.

2.2 Ceiling Mounting with a gang box

Steps:

1. Secure the adapter ring to the gang box.

High-definition Vandal-proof Dome Camera· User Manual

14

Figure 2-6 Secure the Adapter Ring

2. Loosen the screws to open the lower dome.

3. Remove the black liner.

Figure 2-7 Remove the Black Liner

4. Route the cables and connect the power supply and output the

video on a monitor

5. Secure the camera to the adapter ring with the screws.

High-definition Vandal-proof Dome Camera· User Manual

15

Figure 2-8 Install the Camera

6. Adjust the lens.

1). View the camera image via the monitor.

2). Loosen the lock screw besides the lens

3). Rotate the panning table to adjust the panning position of

the camera. 0 to 355° is adjustable.

4). Rotate the tilting table to adjust the tilting position of the

camera. 0 to 75° is adjustable.

5). Rotate the lens to adjust the azimuth angle of the image. 0

to 355° is adjustable.

6). Tighten the lock screw.

7). Move the focus lever and zoom lever to adjust the focus

and the zoom.

7. Attach the black liner back to the camera.

High-definition Vandal-proof Dome Camera· User Manual

16

Figure 2-9 Attach the Black Liner

8. Attach the lower dome back to the camera and secure it with

the screws.

Figure 2-10 Install the Lower Dome

9. Remove the protection film softly to complete the installation.

Note:

High-definition Vandal-proof Dome Camera· User Manual

17

Remove the protection film after the installation is completed in

case of the image problem caused by the scrape of the lower

dome.

2.3 Wall Mounting

Note:

Please make sure that the wall is strong enough to withstand three

times the weight of the camera.

Steps:

1. Drill four expansion screw holes on the wall.

2. Secure the mount to the wall with the expansion screws.

3. Insert the adapter ring to the mount.

Figure 2-11 Install the Mount and the Adapter Ring

4. Loosen the screws to open the lower dome.

5. Remove the black liner.

6. Secure the camera to the adapter ring.

High-definition Vandal-proof Dome Camera· User Manual

18

Figure 2-12 Install the Camera

7. Route the cables and connect the power supply and output the

video on a monitor.

8. Adjust the Lens.

1). View the camera image via the monitor.

2). Loosen the lock screw besides the lens

3). Rotate the panning table to adjust the panning position of

the camera. 0 to 355° is adjustable.

4). Rotate the tilting table to adjust the tilting position of the

camera. 0 to 75° is adjustable.

5). Rotate the lens to adjust the azimuth angle of the image. 0

to 355° is adjustable.

6). Tighten the lock screw.

High-definition Vandal-proof Dome Camera· User Manual

19

7). Move the focus lever and zoom lever to adjust the focus

and the zoom.

9. Attach the black liner back to the camera.

Figure 2-13 Install the Black Liner

10. Attach the lower dome back to the camera and secure it with

the screws.

Figure 2-14 Install the Lower Dome

Page is loading ...

Hikvision DS-2CC52A1P-AVPIR2 User manual

This manual is also suitable for

Hikvision DS-2CC52A1P-AVPIR2 User manual

Related papers

Other documents