USB 3.0 4-Port Hub
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.
MN3000000061 Page2
Features & Specifications
4 downstream and 1 upstream ports
Compliant with Universal Serial Bus 3.0 specifications
Supports simultaneous operation of multiple USB 3.0, USB 2.0
and USB 1.1 devices
Up to 5Gbps data transfer rate
Hot-swapping feature allows you to connect/disconnect devices
without powering down the system
No device drivers required for Hub installation
LED to indicate Hub power
System Requirements
Windows® XP/Vista/7 (32/64 bit)
Available USB port
Package Contents
1 x USB 3.0 4-Port Hub
1 x User Manual
1 x USB 3.0 Cable
1 x Power Adapter (Optional)
MN3000000061 Page3
Note: Contents may vary depending on country/market.
Hardware Installation
1. Plug the power adapter into the power jack of the USB 3.0 4-Port
Hub.
2. Plug the USB 3.0 4-Port Hub into your computer’s Superspeed
USB 3.0 port.
3. Upon powering up your computer, the USB 3.0 4-Port hub will be
recognized by the computer’s operating system.
4. Once complete, you are ready to plug all peripheral devices into
your new USB 3.0 4-Port Hub.
Driver Installation
No driver installation is required for Windows operating systems, as
this enclosure is natively supported, so the drivers are already installed.
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
SIIG JU-H70411-S2 User manual
-
-
LevelOne USB-0502 User manual
-
Seagate STEL6000100 User manual
-
Rosewill RX309 User manual
-
-
-
SYBA SY-KVM31036 User manual
-
ASSMANN Electronic AK-330105-200-S Datasheet
-
Vivanco 28270 User manual