Lucasey LC4X3WS Installation guide

LC4X3WS
Lucasey
Brand
Lucasey
Model
LC4X3WS
Category
Flat panel wall mounts
Type
Installation guide

Lucasey LC4X3WS is an innovative security wall mount designed for flat-screen monitors, offering both flexibility and protection for your valuable equipment. With its slim profile design, it complements modern monitor aesthetics while ensuring a secure and stable installation. The LC4X3WS allows you to mount your monitor directly to its VESA mounting plate or utilize an adaptor plate (sold separately) for added versatility.

Lucasey LC4X3WS is an innovative security wall mount designed for flat-screen monitors, offering both flexibility and protection for your valuable equipment. With its slim profile design, it complements modern monitor aesthetics while ensuring a secure and stable installation. The LC4X3WS allows you to mount your monitor directly to its VESA mounting plate or utilize an adaptor plate (sold separately) for added versatility.

A
Monitor Not Included
Direct Monitor Attachment
B
Adaptor Plate Sold Separately
Shown with FSUL Series Adaptor
Monitor Attachment with Adaptor Plate
Phillips Head Screw
LC4X3WS VESA
Mounting Plate
(Tape #1576)
Monitor Threaded Insert
DETAIL A
Secure the Adaptor Plate to the LC4X3WS VESA Mounting Plate with the
provided hex bolts, nuts, and washers. (DETAIL B)
Refer to the specific Adaptor Plate instructions to attach the
adaptor plate to the monitor.
Monitor Attachment with Adaptor Plate
Use fasteners as specified by the monitor manufacturer to attach the monitor
directly to the LC4X3WS VESA Mounting Plate. (DETAIL A)
Direct Monitor Attachment
Determine which type of monitor attaching hardware is required for the
monitor as specified by the monitor manufacturer. Various sizes of monitor
attaching screws are provided for convenience (See the Hardware List below)
If mounting the monitor directly to the LC4X3WS VESA Mounting Plate, follow the
Direct Monitor Attachment instructions. If mounting the monitor using an
Adaptor Plate, follow the Monitor Attachment with Adaptor Plate instructions.
Flat Washer
Hex Nut
Lock Washer
DETAIL B
Hardware List
4mm x 25mm Set Screws ... 4 4mm Hex Nuts ... 8
5mm x 30mm Set Screws ... 4 5mm Hex Nuts ... 8
6mm x 30mm Set Screws ... 4 6mm Hex Nuts ... 8
4mm x 12mm Phillips Screws ... 4 5mm Flat Washers ... 12
5mm x 12mm Phillips Screws ... 4 1/4" Flat Washers ... 12
6mm x 12mm Phillips Screws ... 4
Studed Plate
6 ...
4 ...
4 ...
1 ...
1 ...
#14 x 2-1/2" HWH Lag Screws
5/16" Lock Washers, Black
5/16-18 Hex Nuts, Black
#10-24 x 1" Machine Screw
#10-24 x 1" Button Pin Head Security Screw
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677
DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
INSTALLATION INSTRUCTIONS Page 1 of 2
LC4X3WS_Ins (11/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
LC4X3WS Slim Profile Flat Screen Security Wall Mount
LC4X3WT Wall Mounting Bracket
Lag Screws
1. Raise the monitor with attached brackets to the LC4X3WS Wall Mounting
Bracket and slip the rivets of the LC4X3WS VESA Mounting Plate into the
slots on the LC4X3WS Wall Mounting Bracket.
2. Screw the LC4X3WS Wall Mounting Bracket to the LC4X3WS VESA Mounting
Plate with the provided Machine Screw.
Note: The security screw with a pin head can be substituted for the machine screw
in step 2 for greater security. This screw requires a special socket tool for installation
and removal, SH10ASKT (Sold Separately)
Attaching Monitor to Wall Mounting Bracket
1. After determining the best possible viewing location on the wall,
find the middle of two wood studs in the wall on 16" centers.
2. Use the LC4X3WS Wall Mounting Bracket as a template to mark
the locations for six wood screw pilot holes.
3. Drill the pilot holes using a 1/8" drill bit, 2-3/4" deep.
4. Attach the LC4X3WS Wall Mounting Bracket to the wall using the
six provided Lag Screws.
Attaching Wall Mounting Bracket
Wood Lag Screws are provided for wood stud installations.
For concrete or metal sutds, use the WMAAB6, concrete anchor
bolt kit, or the WMATB6, toggler bolt kit, (sold separately) and
follow the instructions specific to these fasteners.
Attaching Monitor to Wall Mounting Bracket
Security Head or Phillips Head Machine Screw
Slots for Rivets
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677
DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
INSTALLATION INSTRUCTIONS Page 2 of 2
LC4X3WS_Ins (11/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
LC4X3WS Slim Profile Flat Screen Security Wall Mount
  • Page 1 1
  • Page 2 2

Lucasey LC4X3WS Installation guide

LC4X3WS
Lucasey
Brand
Lucasey
Model
LC4X3WS
Category
Flat panel wall mounts
Type
Installation guide

Lucasey LC4X3WS is an innovative security wall mount designed for flat-screen monitors, offering both flexibility and protection for your valuable equipment. With its slim profile design, it complements modern monitor aesthetics while ensuring a secure and stable installation. The LC4X3WS allows you to mount your monitor directly to its VESA mounting plate or utilize an adaptor plate (sold separately) for added versatility.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents