8.5
"
Steps 1-4
Rubber Feet
LG Monitor Base
(8PL.) #8 x 5/8" Phillips Round Head Tapping Screws
Step 5
LG1558B Bottom Plate
Step 6
LG1558B INSTALLATION INSTRUCTIONS
LG1558B_Install (9/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 1 of 2
1 ...
1 ...
4 ...
4 ...
6 ...
8 ...
LG1558 Top Plate
LG1558B Bottom Plate
Security Screws
5mm x 6mm Phillips Round Head Machine Screws
#6 x 1/2" Phillips Flat Head Tapping Screws
#8 x 5/8 Phillips Round Head Tapping Screws
Component List
1.
2.
3.
4.
5.
6.
Determine the appropriate location on the furniture
for the monitor. Mark a parallel line to the front edge
of the LG monitor base. Mark a second parallel line
8-1/2" back from the previous line.
Carefully line up the back of the LG1558B Bottom Plate
with the second line marked in step 1.
Mark the location of the (8) mounting hole locations
using the Bottom Plate as a template.
Drill 5/8" deep pilot holes with a 1/16" bit in each of
the mounting hole locations.
Attach the LG1810B Bottom Plate to the furniture with
the provided #8 x 5/8" Phillips Round Head Screws.
Remove the Rubber Feet from the bottom of the LG
Monitor Base.
for 32" LG Model 32LH250H
LG1558B - Bolt Down Furniture Mount
(4PL.) 5mm x 6mm Phillips Machine Screws
(6PL.) #6 x 1/2 Phillips Flat Head Tapping Screws
Step 7
Step 8
Top Plate Assembly
with LG Monitor Base
Bottom Plate with Rivets
(4PL.) Security Screws
Step 9
LG1558B INSTALLATION INSTRUCTIONS
LG1558B_Install (9/09) ©2009 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
Page 2 of 2
7.
8.
9.
Attach the LG1558 Top Plate to the LG Monitor Base
with the provided 5mm x 6mm Phillips Machine
Screws & #6 x 1/2" Phillips Tapping Screws
Align the slots on the Top Plate Assembly with the
rivets on the Bottom Plate. Pull forward on the Top
Plate Assembly to lock the two plates together.
Double check that all of the rivets have properly
seated by lifting up on all four corners of the Top
Plate Assembly. Push the Top Plate Assembly back
to make sure the attachment is secure.
Note: Aligning the mount plates with the monitor
attached to the monitor base is not recommended.
Attach the LG Monitor to the Monitor Base with the
provided 4mm x 25mm Pin Head Security Screws.
Follow the LG instructions for attaching the Monitor
Base to the LG Monitor.
(Security Screws Require a Special Tool to install and
remove, sold separately with the LG1558K - Release
Key)
/