Logik L323CD11 User manual

42" / 47" 3D Ready LCD TV

Instruction Manual

L423CD11

L473CD11

L42_473CD11_IB_111013_Zell.indd 1 13/10/2011 12:05 PM

L42_473CD11_IB_111013_Zell.indd 2 13/10/2011 12:05 PM

Contents

Preparation .........................................................................................................................................................................................5

Unpacking the TV ...............................................................................................................................................................................................................5

Installing / Removing the Base Stand .........................................................................................................................................................................6

Front / Right Side View and Controls ...........................................................................................................................................................................7

Rear View and Sockets ......................................................................................................................................................................................................8

Installing Batteries in the Remote Control ................................................................................................................................................................9

Remote Control Operation Range ................................................................................................................................................................................9

Remote Control .................................................................................................................................................................................................................10

Connections ......................................................................................................................................................................................12

Making Video and Audio Connections .....................................................................................................................................................................12

Connecting an AV Device with an HDMI Cable .....................................................................................................................................................12

Connecting a Computer with a VGA Cable .............................................................................................................................................................13

Connecting an AV Device with a Component (YPbPr) Cable ...........................................................................................................................13

Connecting an AV Device with a SCART Cable ......................................................................................................................................................14

Connecting an AV Device with Composite Cable .................................................................................................................................................14

Connecting a Digital Audio Receiver ........................................................................................................................................................................15

Connecting an Audio Receiver ....................................................................................................................................................................................15

Connecting Headphones ...............................................................................................................................................................................................16

Initial Setup ......................................................................................................................................................................................17

Turning the TV on for the First Time ..........................................................................................................................................................................17

− Target Region Descriptor ...................................................................................................................................................................................18

− Selecting the Input Source................................................................................................................................................................................19

− Channel Selection ...............................................................................................................................................................................................19

− Display Channel Information ...........................................................................................................................................................................19

− Volume Adjustment .............................................................................................................................................................................................19

Customising TV Settings .................................................................................................................................................................20

Channel Setting (TV, DTV or Radio Mode) .............................................................................................................................................................. 20

− Auto Tuning (ATV / DTV mode)....................................................................................................................................................................... 20

− ATV Manual Tuning (ATV mode) .....................................................................................................................................................................21

− DTV Manual Tuning (DTV mode) ....................................................................................................................................................................21

− Channel Edit (ATV Mode) .................................................................................................................................................................................. 22

− Channel Edit (DTV Mode) .................................................................................................................................................................................. 23

− Signal Information (DTV Mode) ...................................................................................................................................................................... 23

− CI (Common Interface) (DTV Mode) .............................................................................................................................................................. 24

− Software Update (USB) ...................................................................................................................................................................................... 25

Picture Setting .................................................................................................................................................................................................................. 26

Sound Setting ................................................................................................................................................................................................................... 27

− Stereo / Dual Sound Reception (ATV Mode) .............................................................................................................................................. 28

− Speaker Sound Output Selection (DTV Mode) ......................................................................................................................................... 29

Time Setting ...................................................................................................................................................................................................................... 29

Option Setting .................................................................................................................................................................................................................. 30

− OSD Language ...................................................................................................................................................................................................... 30

− TT Language ...........................................................................................................................................................................................................31

− Audio Language (DTV Mode) .......................................................................................................................................................................... 32

− Subtitle Language (DTV Mode) ...................................................................................................................................................................... 32

− Hearing Impaired ................................................................................................................................................................................................. 33

− PVR File System (DTV Mode) ............................................................................................................................................................................ 33

− Aspect Ratio ........................................................................................................................................................................................................... 35

− Blue Screen ............................................................................................................................................................................................................ 36

− Restore Factory Default ..................................................................................................................................................................................... 36

Lock Setting ....................................................................................................................................................................................................................... 37

− Lock System ........................................................................................................................................................................................................... 37

− Set Password ......................................................................................................................................................................................................... 37

− Block Channel ....................................................................................................................................................................................................... 38

− Parental Guidance ............................................................................................................................................................................................... 39

− Key Lock ..................................................................................................................................................................................................................40

L42_473CD11_IB_111013_Zell.indd 3 13/10/2011 12:05 PM

Using the Features ...........................................................................................................................................................................41

EPG (Electronic Programme Guide) (DTV Mode) ..................................................................................................................................................41

− Switch On / O EPG ..............................................................................................................................................................................................41

− Select a Programme ............................................................................................................................................................................................41

Teletext (ATV Mode) ........................................................................................................................................................................................................ 42

− To Turn on Teletext Function........................................................................................................................................................................... 42

Digital Teletext (DTV Mode) ......................................................................................................................................................................................... 42

− Teletext within Digital Service ........................................................................................................................................................................ 42

Entertainment ..................................................................................................................................................................................43

3D Imaging ......................................................................................................................................................................................................................... 43

− 3D Technology ...................................................................................................................................................................................................... 43

− 3D Imaging Viewing Range ............................................................................................................................................................................. 44

− Watching 3D TV .................................................................................................................................................................................................... 44

− 3D Options ............................................................................................................................................................................................................. 44

− 3D Customised Setting ...................................................................................................................................................................................... 44

Connecting a USB Storage Device ............................................................................................................................................................................. 45

Viewing Photos ................................................................................................................................................................................................................. 46

Listening to Music ............................................................................................................................................................................................................ 46

Watching Movies .............................................................................................................................................................................................................. 47

Viewing Texts .................................................................................................................................................................................................................... 48

PVR (Personal Video Recorder) .......................................................................................................................................................49

Time Shift Function (DTV Mode) ................................................................................................................................................................................ 49

Recording DTV Programme onto a USB Storage Device .................................................................................................................................. 50

Timer Programming ....................................................................................................................................................................................................... 50

Play Recorded Programme ...........................................................................................................................................................................................51

Maintenance .....................................................................................................................................................................................53

Display Modes ..................................................................................................................................................................................55

YPbPr Mode ....................................................................................................................................................................................................................... 55

PC Mode .............................................................................................................................................................................................................................. 55

HDMI Mode ....................................................................................................................................................................................................................... 55

Specifications ...................................................................................................................................................................................56

Safety Warnings ...............................................................................................................................................................................58

L42_473CD11_IB_111013_Zell.indd 4 13/10/2011 12:05 PM

GB

5

Preparation

Unpacking the TV

Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Screws x 6

(P.N.: 119020013)

Mains Cable

(P.N.: 117010062)

3D Glasses x 5

(P.N.: 118050098)

Remote Control / AAA Batteries x 2

(P.N.: 118020377 & 118030017)

Instruction Manual

(P.N.: 120010001-L423CD11/L473CD11)

Quick Start Guide

(P.N.: 120010161-L423CD11/L473CD11)

Digital TV Switchcover Addendum

(P.N.: 120010193)

3D

Thank you for purchasing your new Logik 42" / 47" 3D Ready LCD TV.

Your new TV has many features and incorporates the latest technology to enhance your viewing

experience. We recommend that you spend some time reading this instruction manual in order that you

fully understand these features. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

If items are missing, or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.

Preparation

TV

Base Stand

(P.N.: 101040383)

L42_473CD11_IB_111013_Zell.indd 5 13/10/2011 12:05 PM

GB

6

Preparation

5. Mounting on the wall. This TV is designed to be wall-

mounted with a standard 600 mm x 400 mm mounting

kit designed for flat-panel TVs (sold separately). Mount

this TV according to the instructions included in the

mounting kit. Due to space restrictions, we recommend

that you make all connections (refer to pages 12-16 and

page 45 for details) before mounting on to the wall.

3. To install the base stand first make sure you position the

front of the base stand at the front of the TV. Slide the

base stand to the TV and then use the 6 screws to fix the

base stand to the TV.

4. To remove the stand assembly, lay the TV down on a flat

surface with the back side facing up. Please make sure

to place a soft cushioned material (such as a pillow or

thick piece of foam) beneath the screen. Untighten the 6

screws that hold the stand assembly to the rear of the TV.

Slide the base stand out.

1. Disconnect all cables connected to the TV.

2. Lay the TV down on a flat surface with the back side

facing up. Please make sure to place a soft cushioned

material (such as a pillow or thick piece of foam) beneath

the screen.

Installing / Removing the Base Stand

• In order to get the best 3D effect from your wall mounted 3D TV, we strongly recommend

that you use a tilting wall mount bracket. This will enable you to angle the TV direct at your

favourite viewing position.

• Please read this instruction manual carefully while setting up your TV.

• If you require additional assistance please call our UK Call Centre on 0844 561 1234. Our UK

Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.

Keep all the spare screws should you want

to use the base stand option.

The screw holes will only align if the front of

the base stand is at the front of the TV.

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be

sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with

it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.

Remove the stand assembly before mounting the TV onto the wall.

screw

unscrew

Screws x 6

(P.N.: 119020013)

Screws x 6

(P.N.: 119020013)

600 mm

400 mm

Four mounting holes

(size M5 screw)

L42_473CD11_IB_111013_Zell.indd 6 13/10/2011 12:05 PM

GB

7

Preparation

Front / Right Side View and Controls

Item Description

1 IR (Infrared Receiver)

Receives IR signals from the remote control.

Do not put anything near the sensor, as its function may be affected.

2 POWER LED

Illuminates green when the TV is turned on. Illuminates red when the TV is in standby

mode. The LED will alternate between red and green when the timer programming has

started in the standby mode.

3 TV/AV

Press to select among different input signal sources:

DTV / ATV / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.

Confirmed the selection on OSD menu.

4 MENU Displays the OSD (on screen display) menu.

5 CH + / – Press to select a channel or select a sub-menu from the OSD menu.

6 VOL + / –

Adjusts the volume.

Press to select and adjust a setting in the OSD menu.

7 STANDBY

Switches the TV on from standby mode.

Switches the TV back to standby mode.

INPUT MENU CH+ CH- VOL+ VOL- POWR

TV/AV MENU CH+ CH- VOL+ VOL- STANDBY

3

4

7

6

1 2

L42_473CD11_IB_111013_Zell.indd 7 13/10/2011 12:05 PM

GB

8

Preparation

Rear View and Sockets

Socket Description

1 AUDIO OUT (L/R)

To connect to a DVD player, Digital Set-Top-Box, or other AV devices with audio input

sockets.

2 USB

Allows the insertion of a USB storage device to play video, audio, photo and text files

(USB mode) and record DTV programmes on to a USB storage device.

3 HDMI1 / 2 / 3

To connect to a High-Definition (HD) signal output device, such as a set-top box, blu-ray

disc player or AV receiver.

4 PC Audio In / VGA To connect to a computer or other devices with a VGA interface.

5 Common Interface Slot Allows the insertion of a Common Access Module. (Refer to page 24 for details)

6 SCART To connect to a VCR, DVD Player, or other AV device with a SCART output socket.

7 Digital Audio Out To connect to the audio socket on the digital/standard 5.1 audio system.

8 VIDEO / AUDIO (L/R)

To connect to the Composite VIDEO and AUDIO (L/R) output sockets on external video

devices.

9 YPbPr / AUDIO (L/R)

To connect to a DVD player, Digital Set-Top-Box, or other AV devices with component

(YPbPr) video and audio output sockets.

10 Aerial To connect to the aerial socket on the wall with the RF coaxial cable.

11

Headphone Out

To connect to the headphones.

12 AC POWER IN Connects the mains cable to the mains socket.

13 POWER SWITCH Switch on the POWER ON/OFF switch to turn the TV to standby mode.

HDMI 1 HDMI 2 HDMI 3 VGA PC audio SCART

Digi tal

Audi o out AV R in L i n Aeri al

AC P OW ER IN POWER SWIT CH

Y Pr Pb

Comm on In terfa ce

USB

Head phone out

L R

Audi o out

1 2 6 7 8 10 11 12 13

5 9

3 4

L42_473CD11_IB_111013_Zell.indd 8 13/10/2011 12:05 PM

GB

9

Preparation

Remote Control Operation Range

Point the remote control at the TV no more than 5 metres from the

remote control sensor on the TV and within 60° in front of the TV.

The operating distance may vary depending on the brightness of the

room.

Installing Batteries in the Remote Control

1. Press and lift the back cover to open the battery compartment of the

remote control.

2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends

of the batteries with the (+) and ( - ) ends indicated in the battery

compartment.

3. Close the battery compartment cover.

Handling the Batteries

• Improper or incorrect use of batteries may cause

corrosion or battery leakage, which could cause

fire, personal injury or damage to property.

• Only use the battery type indicated in this manual.

• When the batteries are exhausted, the remote will

not function. Replace both batteries at the same

time with new ones.

• Do not install new batteries with used ones and do

not mix different types of batteries.

• Do not dispose of used batteries as domestic

waste. Dispose of them in accordance with local

regulations.

Handling the Remote Control

• Take care of your fingernails when you press and

hold the battery release tab.

• Do not drop or cause impact to the remote control.

• Do not spill water or any liquid on the remote

control.

• Do not place the remote control on a wet object.

• Do not place the remote control under direct

sunlight or near sources of excessive heat.

• Remove the battery from the remote control

when not in use for a long period of time, as it

could cause corrosion or battery leakage and may

result in physical injury and/or property damage

including fire.

3D

30° 30°

5M

L42_473CD11_IB_111013_Zell.indd 9 13/10/2011 12:05 PM

GB

10

Preparation

1.

Mutes and restores your TV sound.

2.

Switches the TV between on and standby mode.

3. Source

Select among the dierent input signal sources:

DTV / ATV / AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC

/ USB.

4. Menu

Display the OSD (On Screen Display) menu.

5. Help

Display the Help menu.

6. 3D

• Select among the dierent 3D options:

Side by Side / Top Bottom / Frame Packing / Line by Line / 3D

O

• Normal 2D images as a simulated 3D eect (2D to 3D).

7. TV

A short-cut to switch input source to TV / Digital radio channels.

(DTV mode)

8.

Eject a disc. (DVD mode)

9.

• To start the timeshift playback. (DTV mode)

• To start playback or pause. (USB / DVD mode)

10.

To stop the playback or recording. (USB / DVD mode)

11.

Record the current programme. (DTV mode)

12.

To reverse / advance playback rapidly. (DVD / USB mode)

13.

To skip to the beginning of the previous or next chapter / track /

photo. (DVD / USB mode)

14. USB1 / USB2

Display the Recorded List on USB1 / USB2. (DTV mode)

15. A / B

Display the Schedule List on USB1 / USB2. (DTV mode)

16. Coloured buttons

Access the TELETEXT items or channel edit when using Digital /

Freeview TV Channels. (ATV / DTV mode)

17.

Exit

Exit the OSD menu.

18.

Info

• Display the present channel information such as the current

time and channel name. (ATV / DTV mode)

• Display the present disc information. (DVD mode)

Remote Control

Please note that the DVD mode functions on the remote control only operate on TV

models with a built-in DVD player.

3D

1

4

8

12

14

17

16

7

3

5

9

2

6

11

13

15

18

10

L42_473CD11_IB_111013_Zell.indd 10 13/10/2011 12:05 PM

GB

11

Preparation

19.

Allows you to navigate the OSD menus and adjust the

system settings to your preference.

OK

• Conrm the selection in the OSD menus.

• Display channel list. (ATV / DTV mode)

20. P

• Press the P button once and then press the

buttons to select picture mode: Dynamic / Standard /

Mild / Personal.

• Press the P button twice and then press the

buttons to allow you to watch the screen in various

picture formats: Auto / 4:3 / 16:9 / Zoom / Smart Zoom

/ Dot to Dot / Subtitle. (Dot to Dot only operates in

YPBPR / HDMI mode)

21. S

• Press the S button once and then press the

buttons to select sound mode: Standard / Music /

Movie / Sports / Personal.

• Press the S button twice and then press the

buttons to select speaker sound output. (DTV mode)

• Press the S button twice and then press the

buttons to select Mono to Nicam Stereo. (ATV mode)

22. GUIDE

Displays the EPG (Electronic Programme Guide). (DTV

mode)

23. VOL + / –

Adjusts the volume.

24. CH + / –

Select a channel.

25.

Return to the previous viewing channel. (ATV / DTV

mode)

26. 0-9 Number Button

• Press to select a programme. (ATV / DTV mode)

• Select numbered items in a menu. (DVD mode)

27. SUB

• Selects subtitles which are broadcast with the

programme. (DTV mode)

• Selects subtitles on the DVD. (DVD mode)

28. TEXT

Turns on and o the teletext function. (ATV / DTV mode)

Please note that the DVD mode functions on the remote control only operate on TV

models with a built-in DVD player.

3D

20

27

23

26

22

19

21

28

24

25

L42_473CD11_IB_111013_Zell.indd 11 13/10/2011 12:05 PM

GB

12

Connections

Connecting an AV Device with an HDMI Cable

• This TV can accept High-Definition Multimedia Interface (HDMI) and supports HDCP (High-Bandwidth Digital Content

Protection) Protocol.

• The TV has a total of 3 HDMI input sockets, please make sure the correct input source is selected corresponding to your

connected HDMI input socket.

• When you connect to the output of an HD ready player (blu-ray disc player, game console, set-top box or computer) switch to

the HDMI function and the TV will automatically detect the resolution used by the HDMI source.

• To get the best picture quality, adjust the blu-ray disc player, game console or set-top box output resolution up to 1920 x

1080p.

1. Use an HDMI cable to connect the TV’s HDMI1 /

HDMI2 / HDMI3 input socket to the external AV

device’s HDMI output socket.

2. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

3. Press the STANDBY button at the front right side

of the TV or the

button on the remote control to

turn on your TV.

4. Press the TV/AV button at the front right side of

the TV or the Source button on the remote control

to display the Source List. Use the

buttons to

select HDMI1 or HDMI2 or HDMI3 and then press

the OK button to confirm.

Making Video and Audio Connections

Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibility and

connection procedures.

When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are

complete.

Signal Type

Separate Audio

Connection Required

HDMI

(480i/480p/576i/576p/720p/1080i/1080p)

No

PC

Yes

Component Video

(480i/480p/576i/576p/720p/1080i/1080p)

Yes

SCART (RGB Input) No

Composite Video

Yes

Best Video

Performance

Connections

Although this TV is able to connect to an

HDMI device, it is possible that some devices

may not operate correctly.

Rear View of TV

HDM I1 HDM I2 HDMI3 VGA P C aud io SC ART

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

HDMI Cable

(not included)

L42_473CD11_IB_111013_Zell.indd 12 13/10/2011 12:05 PM

GB

13

Connections

Connecting an AV Device with a Component (YPbPr) Cable

1. Use a component cable to connect the TV’s YPbPr

input sockets to an external AV device’s component

output sockets.

2. Use an AV cable to connect the TV’s

AUDIO(L/R) input sockets to the external AV

device’s component audio output sockets.

(Audio Left = white, and Audio Right = red)

Component port on the TV Y Pb Pr

Video output ports on

DVD player

Y Pb Pr

Y Cb Cr

3. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

4. Press the STANDBY button at the front right

side of the TV or the

button on the remote

control to turn on your TV.

5. Press the TV/AV button at the front right side

of the TV or the Source button on the remote

control to display the Source List. Use the

buttons to select YPbPr and then press

the OK button to confirm.

Connecting a Computer with a VGA Cable

1. Use a VGA cable to connect the TV’s PC input

socket to a computer’s VGA output socket. Use an

audio cable to connect the TV’s PC AUDIO input

socket to the computer’s audio output socket.

2. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

3. Press the STANDBY button at the front right side of

the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the

TV or the Source button on the remote control to

display the Source List. Use the

buttons to select

PC and then press the OK button to confirm.

• The best resolution is 1440 x 900.

• If your computer is set to shut down after a

few minutes of idle mode, the TV will also

switch to standby due to no signal being

received, this is to save energy. Press the

STANDBY button at the right side of the TV

when viewed from the front or the

button

on the remote control to restart the TV.

Rear View of TV

VGA Cable

(not included)

Audio Cable

(not included)

HDM I1 HDM I2 HD MI3 VGA PC audio SCAR T

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Computer

HDM I1 HDM I2 HDM I3 VGA P C aud io S CART

Dig ital

Aud io ou t AV R i n L in Aerial

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Rear View of TV

L

R

COMPONENT

OUT

Y

Pr

Pb

Satellite Receiver

Video Camera

Blu-ray Player / DVD Player /

Recorder

Set-top Box

Game Console

Component Cable

(not included)

Pb/Cb

Y

Pr/Cr

Y

AV Cable

(not included)

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

Red (R)

White (L)

L42_473CD11_IB_111013_Zell.indd 13 13/10/2011 12:05 PM

GB

14

Connections

Connecting an AV Device with Composite Cable

1. Use an AV cable to connect the TV’s AUDIO(L/R)/

VIDEO input sockets to an external AV device’s

composite audio/video sockets. (Video = yellow,

Audio Left = white, and Audio Right = red)

2. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

3. Press the STANDBY button at the front right side of

the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the

TV or the Source button on the remote control to

display the Source List. Use the

buttons to select

AV and then press the OK button to confirm.

Connecting an AV Device with a SCART Cable

1. Use a SCART cable to connect the TV’s SCART input

socket to an external AV device’s SCART output

socket.

2. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

3. Press the STANDBY button at the front right side of

the TV or the

button on the remote control to turn

on your TV.

4. The TV will change the input source to SCART

automatically once the AV device is switched on.

Rear View of TV

HDM I1 HDM I2 HD MI3 VGA PC audio SCAR T

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

SCART Cable

(not included)

Satellite Receiver

VCR

DVD Player / Recorder

Set-top Box

Satellite Receiver

Rear View of TV

HDM I1 HDM I2 HD MI3 VGA PC audio SCAR T

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Video Camera

VCR

DVD Player / Recorder

Set-top Box

Game Console

AV Cable

(not included)

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

Red (R)

White (L)

L42_473CD11_IB_111013_Zell.indd 14 13/10/2011 12:05 PM

GB

15

Connections

Connecting an Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.

1. Use an audio cable to connect the TV’s

AUDIO(L/R) input sockets to the external audio

device’s audio output sockets. (Audio Left =

white, and Audio Right = red)

2. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

3. Press the STANDBY button at the front right side of

the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the

TV or the Source button on the remote control to

display the Source List. Use the

buttons to select

any desired input source and then press the OK

button to confirm.

Connecting a Digital Audio Receiver

For better sound quality, you may want to play the audio through your multi-channel audio receiver.

1. Use an audio cable to connect the TV’s Digital

Audio out socket to an external audio receiver’s

audio coaxial input socket.

2. Plug the connected devices into the mains socket

before switching on the POWER SWITCH which is

located at the rear of the TV.

3. Press the STANDBY button at the front right side of

the TV or the

button on the remote control to turn

on your TV.

4. Press the TV/AV button at the front right side of the

TV or the Source button on the remote control to

display the Source List. Use the

buttons to select

any desired input source and then press the OK

button to confirm.

The TV’s volume control will have no

effect. You may control the audio level via

the Audio Receiver.

Audio Receiver

HDM I1 HDM I2 HD MI3 VGA PC audio SCAR T

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Rear View of TV

Audio Receiver

White (L)

Red (R)

Audio Cable

(not included)

Red (R)

White (L)

Rear View of TV

HDM I1 HDM I2 HD MI3 VGA PC audio SCAR T

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Audio Cable

(not included)

L42_473CD11_IB_111013_Zell.indd 15 13/10/2011 12:06 PM

GB

16

Connections

Connecting Headphones

Connect your headphones to the TV’s socket.

Before putting on headphones, turn the volume down

then put the headphones on and slowly increase the

volume until you reach a comfortable listening level.

Long-term exposure to loud music may

cause hearing damage. It is best to avoid

extreme volume when using earphones,

especially for extended periods.

Rear View of TV

HDM I1 HDM I2 HD MI3 VGA PC audio SCAR T

Dig ital

Aud io ou t AV R i n L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

Earphones Cable

(not included)

L42_473CD11_IB_111013_Zell.indd 16 13/10/2011 12:06 PM

17

GB

Initial Setup

Do not connect the TV to the mains supply

until you have completed all the connections.

2. Connect the mains cable to the AC Power In located

at the rear of the TV and then connect to the mains

socket after you have completed all the connections.

3. Switch on the POWER SWITCH which is located at

the rear of the TV. At this stage, the TV switches to

standby mode. The red LED indicator will illuminate

on the front panel of the TV.

4. In standby mode, press the STANDBY button on the

TV or the

button on the remote control to turn

the TV on. The LED indicator will change from red to

green.

Turning the TV on for the First Time

1. Connect one end of the RF coaxial cable to the aerial

socket on the wall and the other end of the cable to

the Aerial socket at the rear bottom of your TV.

5. The first time you turn the TV on, it will go straight into the First Time

Installation menu. Please ensure the aerial is plugged in and then press

the OK button. (If you have already installed the TV using the Quick Start

Guide, please go to “Selecting the Input Source” section on the next

page.)

Please press OK button to

begin auto tuning !

• Always disconnect the TV from the mains socket when not in use for a long period of time.

• The STANDBY button at the front right side of the TV or the

button on the remote control is only used for

switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the

mains power, please remove the mains cable from the mains socket.

Initial Setup

The STANDBY button is located on the front

right side of the TV.

OFF

ON

HDMI 1 HDMI2 HDMI3 VGA PC a udio SCAR T

Digi tal

Audi o out AV R in L in Aeria l

AC P OWER IN POW ER SW ITCH

Y Pr Pb

Comm on In terfa ce

USB

Head phone out

L R

Audi o out

OR

HDM I1 HDM I2 HD MI3 V GA PC a udio SC ART

Dig ital

Aud io ou t AV R in L in Aeria l

AC POWER IN POW ER SW ITCH

Y Pr Pb

Com mon I nterf ace

USB

Hea dphon e out

L R

Aud io ou t

RF coaxial cable

(not included)

L42_473CD11_IB_111013_Zell.indd 17 13/10/2011 12:06 PM

18

GB

Initial Setup

7. Channel tuning will commence. This operation may take up to 10

minutes. The display will show the progress of the tuning and the

number of channels found.

8. If you want to skip the ATV tuning, press the Menu button to interrupt

the tuning half way. A pop-up screen will be displayed, press the

button to select YES to confirm. You will then go straight to DTV tuning.

You may repeat the above step if you also want to skip the DTV tuning.

An installation reminder will appear the next time you turn on the TV.

9. After tuning is complete, the channels are arranged in the broadcaster's

preset order. If you wish to skip channels, modify the preset order or

rename channels, select Channel Edit under the Channel menu (refer to

pages 22-23 for details).

Target Region Descriptor

During tuning your TV may have received signals from more than one

transmitter. If this has occurred the Target Region Descriptor screen will be

displayed. This will enable you to select the correct regional transmission for

the local news service that you require.

Press the

buttons to adjust each option's setting and then press the OK

button to confirm.

Country Code This will be shown as GBR for the UK.

Primary Region

This will show the regional country (England, Wales,

Scotland, NI).

Secondary Region

This will allow you to set the region for your local

news service on BBC and ITV (London, Beds and

Cambs etc).

Tertiary Region

You may receive signals from more than one

transmitter within the Secondary Region, (e.g Beds

and Cambs may have Luton or Sandy Heath).

Channel Tuning

TV : 0 Channel

DTV : 0 Channel

Radio : 0 Channel

Data : 0 Channel

1 %... 471.25 MHz (TV)

Please press MENU key to skip

Target Region Setting

Country Code GBR

Primary Region England

Secondary Region

Tertiary Region

London

6. Press the buttons to navigate the menu and change the

settings. Press the OK button to confirm.

OSD Language Select your desired language to be displayed on

the menu. The default on-screen menu language

is set as English.

Country Select the country where you will operate the TV.

The default country is set as UK.

Please select an OSD Language

Deutsch

Español Français

Português Italiano

English

Country

France

Germany Portugal

Italy Spain

UK

Menu

L42_473CD11_IB_111013_Zell.indd 18 13/10/2011 12:06 PM

19

GB

Initial Setup

Selecting the Input Source

1. Press the TV/AV button at the front right side of the TV or the Source button

on the remote control to display the Input source list.

2. Press the

buttons to select the input source that you want: DTV / ATV /

AV / SCART / YPBPR / HDMI1 / HDMI2 / HDMI3 / PC / USB.

3. Press the OK button to confirm your selection. If you do not press the OK

button to confirm, the TV will automatically confirm the selected input

source within 4 seconds.

In DTV mode, press the TV button to switch to TV / digital

radio channels directly.

Input Source

DTV

ATV

AV

YPBPR

HDMI2

SCART

HDMI1

PC

HDMI3

USB

Channel Selection

• Press the CH+ / – buttons at the front right side of the TV or on the remote control repeatedly or the 0-9 buttons on the

remote control to select the channel.

Alternative

Press the OK button to enter the Channel List. Then use the buttons to highlight and select the channel.

Press the OK button to view the selected channel.

• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the

channel will then be unlocked (refer to page 38 for details on Block Channel).

• Press the

button to return to the previously viewed channel.

Display Channel Information

• Press the Info button to view the current information.

Volume Adjustment

• Press the VOL+ or – button at the front right side of the TV or on the remote control to adjust the volume.

• If you wish to switch the sound off, press the

button. Press the button again or the VOL+ or – button to resume audio

listening.

L42_473CD11_IB_111013_Zell.indd 19 13/10/2011 12:06 PM

20

GB

Customising TV Settings

4. Channel tuning will commence. This operation may take up to 6 minutes.

The display will show the progress of the tuning and the number of

channels found.

5. If you want to skip the ATV tuning, press the Menu button to interrupt

the tuning half way. A pop-up screen will be displayed, press the

button to select YES to confirm. You will then go straight to DTV tuning.

You may repeat the above step if you also want to skip the DTV tuning.

An installation reminder will appear the next time you turn on the TV.

6. After tuning is complete, the channels are arranged in a preset order. If

you wish to skip channels, modify the preset order or rename channels,

select Channel Edit under the channel menu (refer to pages 22-23 for

details).

3. In the Tune Type menu, press the

buttons to select ATV / DTV /

DTV + ATV. Press the

button and then press the buttons to

select the country where you will operate the TV. Press the OK button to

confirm.

2. Press the

buttons to select Auto Tuning and then press the OK

button.

Channel Setting (TV, DTV or Radio Mode)

Auto Tuning (ATV / DTV mode)

Use this to automatically find and store all available channels. This is normally recommended if some channels have been added

or removed by the broadcaster or if you have moved house.

1. Press the Menu button and then press the

buttons to select the

CHANNEL menu and then press the OK button.

Channel Tuning

TV : 0 Channel

DTV : 0 Channel

Radio : 0 Channel

Data : 0 Channel

1 %... 471.25 MHz (TV)

Please press MENU key to skip

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

EXIT

Tune Type

France

Germany

Portugal

Italy

Spain

UK

Menu

ATV+DTV

Other

Customising TV Settings

Auto Tuning

ATV Manual Tuning

Software Update(USB)

Channel Edit

(ATV mode)

Auto Tuning

DTV Manual Tuning

Signal Information

CI Information

Software Update(USB) Off

Channel Edit

(DTV mode)

L42_473CD11_IB_111013_Zell.indd 20 13/10/2011 12:06 PM

Page is loading ...

Logik L323CD11 User manual

This manual is also suitable for

Logik L323CD11 User manual

Related papers

Other documents