Luxor FP3500 Operating instructions

Brand: Luxor

Model: FP3500

Category: Multimedia carts & stands

Type: Operating instructions

Luxor FP3500 is a versatile and adjustable TV and media stand designed to accommodate most 40" - 60" flat panel displays, with a maximum weight capacity of 100 lbs. It features a sturdy steel construction with a black finish, providing a sleek and modern look. The stand allows for various adjustments, including height adjustments for both the upper and lower poles, enabling you to find the perfect viewing angle. Additionally, the media shelf provides ample space for AV components and other accessories. Cable management holes on the poles ensure a clean and organized setup.

Luxor FP3500 is a versatile and adjustable TV and media stand designed to accommodate most 40" - 60" flat panel displays, with a maximum weight capacity of 100 lbs. It features a sturdy steel construction with a black finish, providing a sleek and modern look. The stand allows for various adjustments, including height adjustments for both the upper and lower poles, enabling you to find the perfect viewing angle. Additionally, the media shelf provides ample space for AV components and other accessories. Cable management holes on the poles ensure a clean and organized setup.

Table of Contents

Table of Contents and Warnings

Part List

Assembly and Installation

1. Adjust upper and lower poles

2. Attaching to the base assembly

4. Install steel cross rods

5. Install the TV

6. Install mount to frame

7. Adjusting the mount

2

3

4

5

7

8

9

10

Tools Required

Phillips Screwdriver

Tape Measure

Wrench

WARNING!

Severe personal injury and property damage can result from improper installation.

Read instructions carefully before beginning.

Assistance is required when installing the TV.

If you do not understand the instructions or have any concerns please contact a

qualified local installer.

Do not install or assemble if the product or hardware is damaged or missing, if you

require replacement parts, contact your local dealer.

This product fits most 40” - 60” flat panel displays; maximum eight for the disply is 100 lbs.

Do not use this product for anything other than what it was originally designed.

This product contains moving parts, please use caution.

The manufacturer disclaims any liability for the modifications, improper installation, and

installation exceeding maxium weight capacity. The manufacturer will not be liable for any

damages arising out of the use of, or inability to use the product.

Tighten

Loosen Adjustment

Phillips

Screwdriver

Tape

Measure

Visual Guides

By Hand Hex Wrench

3. Installing the Media Shelf 6

8

10

4

5

D

E

0

5

G

H

I

A1x1

A2x4

A3x1

B1x1

B3x1

D1x1

D2x2

J

16

K

25

B2x2

B4x4

8

D3x2

C1x1 C3x1C2x1

4

L

Install the media shelf

Remove Pre-Installed Screws

Pre-Installed

Pre-Installed

Pre-Installed

L

Spacer Suggestions

D

J

D2

D1

K

Slider plate

D3

I

1
2
3
4
5
6
7
8
9
10

Luxor FP3500 Operating instructions

Brand: Luxor

Model: FP3500

Category: Multimedia carts & stands

Type: Operating instructions

Luxor FP3500 is a versatile and adjustable TV and media stand designed to accommodate most 40" - 60" flat panel displays, with a maximum weight capacity of 100 lbs. It features a sturdy steel construction with a black finish, providing a sleek and modern look. The stand allows for various adjustments, including height adjustments for both the upper and lower poles, enabling you to find the perfect viewing angle. Additionally, the media shelf provides ample space for AV components and other accessories. Cable management holes on the poles ensure a clean and organized setup.

Download PDF

Related papers

Other documents