Displays2go CFSTN2B Assembly Instructions

Brand: Displays2go

Model: CFSTN2B

Category: Multimedia carts & stands

Type: Assembly Instructions

Stand Instructions

CFSTN2B

Table of Contents

Table of Contents and Warnings

Part List

Assembly and Installation

1. Adjust upper and lower poles

2. Attaching to the base assembly

3. Install steel cross rods

4. Install AV Shelf

5. Install the TV

6. Install mount to frame

2

3

4

5

6

7

8

9

Tools Required

Phillips Screwdriver

Tape Measure

Wrench

WARNING!

Severe personal injury and property damage can result from improper installation.

Read instructions carefully before beginning.

Assistance is required when installing the TV.

If you do not understand the instructions or have any concerns please contact a

qualified local installer.

Do not install or assemble if the product or hardware is damaged or missing, if you

require replacement parts, contact your local dealer.

This product fits most 40” - 60” flat panel displays; maximum eight for the disply is 100 lbs.

Do not use this product for anything other than what it was originally designed.

This product contains moving parts, please use caution.

The manufacturer disclaims any liability for the modifications, improper installation, and

installation exceeding maxium weight capacity. The manufacturer will not be liable for any

damages arising out of the use of, or inability to use the product.

Tighten

Loosen Adjustment

Phillips

Screwdriver

Tape

Measure

Visual Guides

By Hand Hex Wrench

Assistance

Required

7.

Webcam shelf installation

10

8. Adjusting the mount

11

8

10

4

5

D

E

0

5

G

H

I

A1x1

A2x4

A3x1

B3x1

C1x1

C2x2

J

15

K

25

B2x2

B4x4

8

C3x2

E1x1

E2x1

B1x1

D1x1 D2x1 D3x1 D4x2

5

0

6

1.2

Φ

12 6.3

NML

L

H

M

22

D2

D3

D4

D4

D1

AV shelf assembly and installation

4

5

5a

D

E

B, C

VESA: 200x200mm

Phillips

screwdriver

5b

Install the TV

Spacer Suggestions

E

D

(B, C)+D,A

D

J

C2

C1

K

Slider plate

Remove pre-installed screws

C3

6

Install mount to frame

Make su re casters

are locked prior to

installation

Attach hooks on C1

onto cross rods B5

Secu re lock hook fully

Lock not included

Lift up lock hook

before installing

mount

Heavy Lifting:

Assistance

Requi red

C1

1

3 4

2

C1

B5

I

E1

E2

7

Webcam shelf installation

Adjustable height

M

N

Phillips

screwdriver

Adjusting the mount

C1

C1

Phillips

screwdriver

Phillips

screwdriver

Remove pre-installed screws

Re-attach screws

Swivel

90°

8

1
2
3
4
5
6
7
8
9
10
11

Displays2go CFSTN2B Assembly Instructions

Brand: Displays2go

Model: CFSTN2B

Category: Multimedia carts & stands

Type: Assembly Instructions

Other documents