Page is loading ...
Installation Instructions for
Suspension
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. LED version may be dimmed with a LED dimmer. Consult
lamp manufacturer for additional information.
1
Allea Pendant
980ALLEAP
1.1
LP954
Assemble the Pendant
1B
SOCKET
2
Feed fixture cord through the shade.
Reinstall the cap onto the cord.
SHADE
CAP
CORD
1
1A
Unscrew fixture cap and remove the cap from the socket
assembly and cord.
SOCKET ASSEMBLY
CAP
CORD
4
1C
Insert the socket assembly nipple through the top of the
shade and secure it in place with the cap.
NIPPLE
3
Install the Lamp
1
2A
Screw the lamp into the socket.
C AUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
Refer to fixture marking for lamp information.
LAMP
SOCKET
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2017 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
A Generation Brands Company
/
