Toto SW2014#01 User manual

C100

A100

SW2034

(TCF6631U)

SW2033

(TCF6630U)

SW2014

(TCF6601U)

WASHLET

Instruction Manual

■

Thank you for your recent purchase of the product. Please read the enclosed

information to ensure the safe use of your product.

■

Be sure to read this Instruction Manual before using your product and keep it in a

safe place for future reference.

2

The available functions vary according to the model.

Functions

C100 A100

Ref.

Page

SW2034

SW2033 SW2014

Basic

Functions

Cleansing

Rear cleansing

●●●

15

Rear soft cleansing

●●●

Front cleansing

●●●

Changing the washing

method

Wand position adjustment

●●●

Water pressure adjustment

●●●

Oscillating cleansing

●●●

Drying

Warm air drying

●●

—

Changing the temperature

Temperature adjustment

●●●

18, 19

Sanitary

Functions

Removing odors

Deodorizer

●●

—

16, 17

Bowl pre-cleaning

Pre-mist

●●

—

Convenient

Functions

Heating the toilet seat

Heated seat

●●●

-

Saving energy

Energy saver

●●●

20, 21

Maintenance

Main Unit

One-touch removal

●●●

26

Removable toilet lid

●●●

27

Wand cleaning

●●●

28

Your Model

Part No.

Check your model name

and write a check mark in

this field as needed.

Product name (Model)

7

1

3

Product name,

Part No.

Safety Precautions .................... 4

Operational Precautions .......... 11

Parts Names ........................... 12

Preparation .............................. 14

Changing Settings ................... 30

What to Do?............................. 34

●

Freeze Damage Prevention

... 34

●

Long Periods of Disuse ........ 35

Troubleshooting ....................... 36

Speciﬁ cations .......................... 40

Warranty .................................. 41

Basic Operations ..................... 15

Automatic Functions ................ 16

DEODORIZER, PRE-MIST

Temperature Adjustment.......... 18

Energy Saver Feature ............. 20

Power Plug .............................. 24

Main unit .................................. 25

Deodorizing Filter .................... 25

Gap between the Main Unit

and the Toilet Bowl .................. 26

Gap between the Main Unit

and the Toilet Lid ..................... 27

Wand ....................................... 28

Wand cleaning

Water Filter Drain Valve ........... 29

As you sit



A mist is sprayed in the toilet bowl.



The deodorizer operates.

The self-cleaning functions operate

automatically.

(See pages 16 and 17 for details.)

Table of Contents

A mist is automatically sprayed

in the toilet bowl to create a water

cushion, which prevents dirt from

adhering to the surface.

ReferenceMaintenanceOperation

Introduction

4

These precautions are important for safe usage. Be sure to follow them and use the product

correctly.

Symbols and Meanings

WARNING

May result in death or serious injury.

CAUTION

May result in injury or property damage.

The following symbols are used to indicate important safety instructions for the use of the product.

Symbol Meaning

This symbol indicates a prohibited use of the product.

This symbol is used to indicate a required step in the use of this product.



This product is classiﬁ ed as Class 1 Equipment and must be grounded.



Install this equipment where the electrical outlet is accessible.



This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.



Use the new hose set included with this equipment. Do not reuse an old hose set.

WARNING

Do not plug or unplug the power plug with wet hands.



Doing so may cause electrical shock.

Do not get any water or cleaning solution on the main unit or power plug.



Doing so may cause ﬁ re, electrical shock, heat or short circuit.



Doing so may cause the product to crack resulting in injury or water damage.

Never disassemble, repair or alter.



Doing so may cause ﬁ re, electrical shock, heat or short circuit.

Do not install the product on moving vehicles such as wheeled vehicles or boats.



Doing so may cause ﬁ re, electric shock, short circuit or malfunction.



The toilet seat, toilet lid, main unit or other parts may come loose and fall off, resulting in injury.

Safety Precautions

5

WARNING

Do not use the Washlet if a malfunction occurs.

Always unplug the plug from the outlet.



Close the water shutoff valve to stop water supply.

Possible malfunctions:



Water is leaking from a pipe or the main unit.



The product is cracked or broken.



The product makes a strange noise or emits a strange odor.



The product emits smoke.



The product is abnormally hot.



The toilet seat cushion is out of place.



Continued use after malfunction could cause a ﬁ re, electric shock, heat, short circuit, injury or

water damage.

Only use tap water or potable well water (underground water).

Do not use seawater.



Doing so may cause irritation to the skin and malfunction.

Do not touch the power plug during thunderstorms.



Doing so may cause electrical shock.

Do not allow the water supply hose to touch the power plug or outlet.



Doing so may cause condensation resulting in a ﬁ re, electrical shock, heat or a short.

Do not do anything that may damage the power cord, power plug.

Do not strike, yank, twist, excessively bend, damage, alter, or heat the electrical cords. Also, do

not place anything heavy on, bind or pinch the electrical cords.



Using a damaged electrical cord may result in a ﬁ re, electrical shock, heat or short.

Do not use a loose or faulty electrical outlet.



Doing so may cause ﬁ re or short circuit.

Do no use any outlet or wiring equipment beyond its speciﬁ ed rating.



Plugging too many plugs into the same outlet, for example using outlet splitters, can cause ﬁ re

due to heat.

Do not use any power supply other than the one speciﬁ ed.

AC 120V,60Hz



Doing so may cause ﬁ re or excessive heat.

Do not stick a ﬁ nger or anything else into the warm air outlet.*

Do not place anything on the warm air outlet or drape clothes over it.



Doing so may cause burns, electrical shock or malfunction.

Keep cigarettes and other open ﬂ ames away from the product.



Failure to do so may cause ﬁ re.

* Except SW2014

Introduction

6

WARNING

Beware of irritation or burn.



Improper use of the toilet seat may cause irritation or burn.

When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to "OFF".

When any of the following persons use a heated seat or warm air drying, someone should switch the

toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".



Young children, the aged and other users unable to set the temperature appropriately themselves.



The ill, physically disabled and others who do not have freedom of movement.



Those using any medicines that cause drowsiness (sleeping or cold medicine), those who have

been drinking heavily, anyone severely fatigued and anyone else liable to fall asleep.

This is an electrical product. Do not install it anywhere water is likely to get on

the product or anywhere with humidity high enough that water is likely to form

on the surface of this product. When using the product in a bathroom, install

a fan or ventilation port and ensure good air ﬂ ow through the bathroom.



Failure to do so may cause ﬁ re or electrical shock.

Always connect the Washlet to the cold water supply.



Connecting to hot water supply may result in burns and equipment damage.

Make sure that a properly grounded (3 prong) outlet has been installed.



Failure to install a grounded outlet could cause electrical shock in the event of a malfunction or

short circuit.

Insert the power plug securely into the outlet.



Failure to do so may cause ﬁ re, heat or short circuit.

To unplug, hold the plug, not the cord.

Do not unplug by pulling the cord.



Pulling on the cord may cause damage and result in ﬁ re or heat.

If the electric cord is damaged, avoid danger by having the manufacturer’s

repair department or equivalent specialist replace it.

Always disconnect the power plug from the outlet before cleaning,

maintenance or inspection.



Failure to do so may cause electrical shock or malfunction.

* Except when using "Wand cleaning".

Periodically remove dust and dirt from the electrical plug and make sure it is

securely plugged into the wall outlet.



Failure to do so may cause ﬁ re, heat or short circuit.

Pull the plug out from the outlet and wipe clean with a dry cloth.

Always unplug the plug from the outlet before removing the main unit.



Failure to do so could cause a ﬁ re or electrical shock.

Safety Precautions (Continued)

7

WARNING

Preliminary studies in females suggest that overuse of continuous spraying

can increase the possibility of vaginal mucosa drying and potential

reduction in desirable microbial organisms.

Although these studies have not been validated, please consult your

healthcare provider for concerns regarding whether these circumstances

may apply to you.

More importantly, if you are an individual suffering from any immune

deﬁ ciency as a result of disease, chemotherapy, or other medical condition

compromising the immune system you should consult your healthcare

provider before use of this product.

CAUTION

Do not use the product if the main unit is unstable.



Doing so may cause the main unit to come loose and fall, resulting in injury.

If the product is damaged, do not touch the damaged section.



Doing so may cause electrical shock or injury.

Replace it immediately.

Do not apply strong force, mechanical shock, step on or stand on the toilet

seat, toilet lid or main unit. Also do not place any heavy object on the toilet

seat, toilet lid or main unit.



Doing so may cause cracking or cause the main unit to come loose and fall, resulting in injury.



Doing so could damage the product and cause injury or water damage.

Do not lift up this product by the toilet seat or lid.

Do not raise the toilet seat or lid while objects are resting on top of the toilet.



Doing so may cause the main unit to come loose and fall, resulting in injury.

When cleaning or maintaining the plastic parts (main unit etc.) or the water

supply hose, use a kitchen cleaner diluted with water. Do not use any of the

following.

Toilet cleaner, household cleaner, benzene, paint thinner, powdered cleanser or nylon scrubbing pads.



These items may damage or crack the plastic and cause injury or malfunction.



These items could damage the water supply hose and cause a water leak.

Introduction

8

Safety Precautions (Continued)

CAUTION

To prevent a sudden water leak, do not remove the water ﬁ lter drain valve

when the shutoff valve is open.



Doing so will cause water to spurt out.

(Refer to Page 29 for instructions on cleaning the water ﬁ lter drain valve.)

Do not fold or crush the water supply hose; do not damage by cutting with a

sharp object.



Doing so may cause water leaks.

Do not install the base plate, which is not attached.



Doing so could cause a ﬁ re or damage.

If a water leak should occur, always close the shutoff valve.

When the ambient temperature is likely to drop to 0°C (32°F) or lower,

prevent damage to the pipes and hoses due to freezing.



Frozen water pipes could cause the main unit and the pipes to break, resulting in a water leak.



Regulate the room temperature to prevent the pipes and hoses from freezing during cold months.



Drain the water.

When not using the Washlet over an extended period of time, drain the

water out of the main unit and the water supply hose after closing the water

shutoff valve, and pull the electrical plug from the outlet.

When using the product again, allow the product to reﬁ ll with water ﬁ rst.



Otherwise, the water in the tank might become contaminated and cause skin inﬂ ammation or

other problems. (Refer to Page 35 for instructions on replenishing the water.)



Leaving the power on may cause ﬁ re or heat.

When installing the water ﬁ lter drain valve, make sure that it is securely

tightened in its proper position.



Failure to securely tighten it may cause a water leaks.

Push the main unit securely on to the base plate.

After pushing the main unit until a click sound is heard, pull it slightly toward you to make sure that

the product does not detach.



Failure to do so could cause the main unit to come loose and fall resulting in injury.

9

DANGER To reduce the risk of electrocution:

1. Do not use while bathing.

2. Do not place or store the product where it can fall or be pulled into a tub or sink.

3. Do not place in or drop into water or other liquid.

4. Do not reach for the product when it has fallen into water. Unplug it immediately.

WARNING

To reduce the risk of burns, electrocution, ﬁ re or injury to persons:

1. Close supervision is necessary when this product is used by, on, or near children or

invalids.

2. Use this product only for its intended use as described in this manual. Do not use

attachments not recommended by the manufacturer.

3. Never operate this product if it has a damaged cord or plug, is not working properly, has

been dropped or damaged, or has been dropped in water. Return the product to a service

center for examination and repair.

4. Keep the cord away from heated surfaces.

5. Never block the air openings on the product or place it on a soft surface, such as a bed

or couch, where the air openings may be blocked. Keep the air openings free of lint, hair,

and other similar items.

6. Never use while sleepy or drowsy.

7. Never drop or insert any object into any opening or hose.

8. Do not use outdoors. Do not operate where aerosol (spray) products are being used or

where oxygen is being administered.

9. Connect this product to a properly grounded outlet only.

See "Grounding Instructions" in Page 10.

10. The tank should be ﬁ lled with water only.

Introduction

10

Grounding Instructions

This product should be grounded. In the event of an electrical short circuit, grounding

reduces the risk of electric shock by providing an escape wire for the electrical current.

The plug must be plugged into an outlet that is properly installed and grounded.

DANGER - Improper use of the grounding plug can result in a risk of electric shock.

If repair or replacement of the cord or plug is necessary, do not connect the grounding wire

to either ﬂ at-head terminal.

Check with a qualiﬁ ed electrician or serviceman if the grounding wire instructions are not

completely understood, or if in doubt as to whether the product is properly grounded.

This product is factory equipped with a speciﬁ c electric cord and plug to permit connection

to a proper electric circuit. Make sure that the product is connected to an outlet having the

same conﬁ guration as the plug.

No adapter should be used with this product. Do not modify the plug provided - if it will not ﬁ t

in the outlet, have the proper outlet installed by a qualiﬁ ed electrician.

If the product must be reconnected for use on a different type of electric circuit, the

reconnection should be made by qualiﬁ ed service personnel.

If it is necessary to use an extension cord, use only a three wire extension cord that has a

three blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the

product.

Replace or repair a damaged cord.

Grounding pin

Save these instructions.

Safety Precautions (Continued)

11

Operational Precautions

■

For prevention of damage

●

Wipe plastic areas such

as the main unit and

control panel with a soft,

wet cloth.

Dry cloth or tissue

●

Do not lean against the

toilet lid.

■

Problem Prevention

●

Disconnect the power plug if there is a risk of lightning.

●

A toilet seat cover or a toilet lid cover cannot be used.

(The seat switch may not function properly.)

Covers

●

Do not urinate on the main unit, toilet seat or wand.

(Doing so may cause pink or brown stains or a

malfunction.)

●

Do not apply strong forces to the control panel.

●

When using a toilet cleaner to clean the toilet, wash it off

within 3 minutes and leave the toilet seat and toilet lid open.

Wipe off any cleaner that remains on the toilet bowl.

(If vapor from a toilet bowl cleaner enters the main unit, it

may cause a malfunction.)

●

Do not expose to direct sunlight.

(Doing so may cause changes in color, irregular heated

seat temperature, the control panel malfunction or

Washlet malfunction due to the change in temperature.)

●

Use radios, etc. away from the Washlet.

(The Washlet could cause interference with the radio signal.)

●

If you use a booster seat for infants or a soft highchair,

remove it after use.

(Keeping it installed may prevent some of the functions

from being used.)

●

Do not place anything on the toilet seat and lid, and do

not press them with hands.

Failure to do so may turn on the seat switch, causing the

ﬂ oor to get wet if buttons on the control panel are touched

and warm water comes out from the wand. (The seat switch

may turn on if force is applied to the toilet seat or lid.)

■

For prevention of malfunctions

< About the seat switch >

●

When you sit on the toilet seat, the seat switch turns

ON, enabling you to use various features.

(A click sound is heard when the seat switch is ACTIVATED.)

Gap

The toilet seat lowers.

Switch

ON

Seat switch

(Built-in)

●

Sit back on the toilet seat.



The seat switch will not turn on unless you sit

on the seat properly.

Note



When a child uses the Washlet, the seat switch

may not be ACTIVATED by their light body weight.



Since the toilet seat is designed to move up

and down, a clearance is provided between the

toilet seat cushion and the toilet bowl.

Introduction

12

Parts Names

Control panel

(Page.15)

Power plug

(Page.14)

Heated seat

Wand

Wand cover

Warm air outlet cover *

Seat switch

(Built-in)

Toilet lid

Toilet lid cushion

Product name,

part no., etc.

Shutoff valve

(Page.14)

Power cord

Water supply hose

13

Left side of main unit

Toilet seat

cushions

Water ﬁ lter drain valve

(Page 29)

Water drain plug

(Page 35)

SW2033

The toilet seat and lid shape varies by model.

Descriptions in this manual are based on the illustrations of SW2034.* Except SW2014

Right side of main unit

Deodorizer outlet *

Deodorizing ﬁ lter *

(Page.25)

Main unit removal button

(Page.26)

Introduction

14

Preparation

Using the Product for the First Time

2.Open the shutoff valve

1

Fully open the shutoff valve.

Shutoff

valve

1.Turn on the power

1

Insert the power plug.



The wand extends and then retracts.

2

Check that the POWER LED

on the main display is lit up.

Lit

15

Basic Operations

Stopping

[STOP]

Drying

[DRYER]*

Cleansing

[REAR]

[OSCILLATING]

When you press this button

again during use, the wand

moves back and forth to

wash your rear thoroughly.

[SOFT REAR]

Washes your rear with mild water

pressure.

[FRONT]

Serves as a bidet for ladies.

For your information

●

Water may sometimes come out from around the wand when it expands in the warm water tank, but this is normal.

●

As the warm water tank of hot-water system is used, the temperature of warm water may become lower if it is continuously consumed.

Temperature adjustment button

(Page 18)

• Adjust temperatures

[PRESSURE]

●

You can adjust the water pressure

as desired to 5 different levels.

●

The PRESSURE LEDs lights up

when you sit on the toilet seat.

[POSITION]

●

You can adjust the washing position as desired to 5

different points.

●

The washing position returns to the standard

position (3rd point) when you stand up from the

toilet seat.

Note

• Sitting back on the toilet seat makes it easier to adjust the wand position and to reduce splashing.

●

Functions that

operate when a button

is pressed during

"REAR", "SOFT REAR"

or "FRONT" cleansing.

Indication

LED

Cleanses your rear.

Dries your rear.

* Except SW2014

Introduction

Operation

16

As you approach

As you sit As you stand up*

DEODORIZER

(SW2034, SW2033 only)

Deodorizer stops

➝

It stops after about 2 minutes

Starts the deodorizer

A mist is sprayed inside the

toilet bowl to make it more

difﬁ cult for dirt to adhere

PRE-MIST

(SW2034, SW2033 only)

A mist is sprayed inside

the toilet bowl

* To sanitize the toilet bowl every time it is used, water remaining in the wand is drained after you stand up from the toilet seat.

Automatic Functions

Cleaning Features

17

Changing

settings

Note



DEODORIZER ON/OFF

(Page 32)



PRE-MIST ON/OFF

(Page 32)

• The pre-mist will not spray for about

90 seconds after you stand up from

the toilet seat.

If dirt adheres...

■

If dirt adheres to the wand

during use, you can extend

the wand to clean it.

●

Cleaning the wand (Page 28)

Operation

18

*

Except SW2014

Lit

Three different temperature levels (high / medium / low) and "OFF" setting can be made.

When temperature is set

Displaying the temperature level of

the pressed button

Warm water temperature

(When you want to adjust the warm water temperature)

Toilet seat temperature

(When you want to adjust the toilet seat temperature)

Drying air temperature*

(When you want to adjust the drying air temperature)

Adjusting the temperature

1

Select a temperature button you want to set from

· ·

*

and press it.

• The current temperature level appears.

2

Press the button selected in step

1

repeatedly

until a desired temperature level lights up.

The setting changes each time the button is pressed

HIGH

Lit

MEDIUM

Lit

LOW

Lit

OFF

The "DRYER"* cannot be turned "OFF".

Note

• If the button is not pressed for about 10 seconds, the temperature adjustment LED will go off, but the setting

will be retained.

If the temperature adjustment LED goes out before the setting is completed, start all over again at step 1.

• When the toilet seat does not get warm, or when the warm water is not warm enough, even after temperature adjustment.

➞

Is the energy saver set to "ON"? (Page 20)

Temperature Adjustment

Warm Water / Toilet Seat / Drying *

19

OFF

When "OFF"

To turn the warm water temperature and toilet seat temperature "OFF" *The "DRYER" cannot be turned "OFF".

1

Select a temperature button you want to turn "OFF" from

· and press it.

• The current temperature level appears.

2

Press the button selected in step

1

repeatedly

until the temperature level is set to "OFF".

The setting changes each time the button is pressed

HIGH

Lit

MEDIUM

Lit

LOW

Lit

OFF

Operation

20

Energy Saver Feature

You can save energy by turning the toilet seat heater to a low temperature (or turning

the heater "OFF") during periods when the toilet will be used infrequently.



It takes about 10 days for the product to determine the periods when it is used relatively less frequently.

Type Situation

When energy saver is set

Main Display

ENERGY

SAVER

You want the Washlet

to save energy

automatically

The Washlet detects time

periods with infrequent use

and lowers the toilet seat

temperature automatically.

Furthermore, it automatically

turns off the toilet seat and warm

water heater during time periods

when the toilet is never used.

Lit

(Green)

OFF

When energy saver is not set

Note

●

Even if the toilet seat heater is being activated (with the toilet seat heater set to "Low" or "OFF," or with the warm water heater

set to "OFF"), the toilet seat will be temporarily heated when you sit on it.

(To reach the setting temperature, the toilet seat and warm water take about 15 minutes and 10 minutes, respectively.)

Page is loading ...

Toto SW2014#01 User manual

Toto SW2014#01 User manual

Related papers

Other documents