SICK MKAS Compact Product information

Type
Product information

This manual is also suitable for

SICK MKAS Compact Analysis System is a complete analyzer system in a small package providing measurement of NOx, CO, SO2, and O2. It includes a particulate filter, flow meter, gas cooler, condensate drain pump, and either the SIDOR or S710 analyzer. It is suitable for emission monitoring and can be configured with options such as a condensate sensor, automatic test gas delivery, 2-stage gas cooler, and NOx converter at the analyzer inlet.

SICK MKAS Compact Analysis System is a complete analyzer system in a small package providing measurement of NOx, CO, SO2, and O2. It includes a particulate filter, flow meter, gas cooler, condensate drain pump, and either the SIDOR or S710 analyzer. It is suitable for emission monitoring and can be configured with options such as a condensate sensor, automatic test gas delivery, 2-stage gas cooler, and NOx converter at the analyzer inlet.

SIDOR
Help
Function
Service
Alarm
Enter
Esc
Selection: ESCAPE
CO2
CO
O2
NO
7 8 9
4 5 6
0
1 2 3
PRODUCT INFORMATION
MKAS Compact
Compact Analyzer System
Proven technology in a compact design
Small footprint and economical to operate
Elegant solution for the analysis of NO
x
, CO, SO
2
and O
2
A complete analyzer system in a
small package
The MKAS Compact from SICK pro-
vides a complete analyzer system in-
cluding all the necessary standard
components. One of two proven ana-
lyzers can be selected: the SIDOR with
long-term signal stability or the modu-
lar S710.
Integrated in the system is one of the
most advanced gas coolers on the
market which is supplied with a par-
ticulate lter and ow meter in addi-
tion to the condensate drain pump.
The MKAS Compact is a gem because
it takes up very little wall mounting
space and the maintenance require-
ments are very low.
The MKAS Compact, pre-congured
and complete is the logical solution
for measuring components such as
NO
x
, CO, SO
2
and/or O
2
.
At a Glance
Standardized system in a
compact design
Small footprint (wall mounting)
Light weight (80 kg/175 lb)
Efcient operating cost through
low maintenance and low
power consumption
Suitable for emission monitor-
ing to meet the requirements of
2001/80/EC
27
th
BlmSchV (Crematories)
Sample gas
probe
Sample gas
line
Gas cooler
Analyzer
01
02
03
04
10
1/N
2
2/CO
3/O
2
Functional principle MKAS Compact
MKAS Compact Cabinet
Testing equipment Gas conditioning Analyzer
Sample
gas inlet
Sample
gas outlet
Calibration
gas inlet
pneumatic
binary
analog
Options
Condensate sensor
(after the cooler)
Signal conversion to
RS485 Modbus with an
intelligent terminal
Automatic test gas deliv-
ery via solenoid valves
2-stage gas cooler
NO
x
converter at analyzer
inlet (optional)
400 V, 3 phase voltage
supply
Gas cooler
Optional
Analog
outputs
Technical Data MKAS Compact
Conguration Standard conguration
Conguraiton with NO
x
converter and cooling unit
Analyzer S710 Modular gas analyzer (see product information, order no. 8009716)
SIDOR gas analyzer (see product information, order no. 8009736)
Measuring components CO, NO, SO
2
, O
2
etc. (depending on analyzer conguration, see product information)
Output and status signals Typically 4 … 20 mA (depending on analyzer conguration, see product information)
Sample requirements
Sample ow rate Approx. 60 … 100 l/hr
Sample temperature Max. 200 ºC (390 °F) at cabinet inlet
Dewpoint H
2
0 Max. 65 ºC (150 °F)
General Data Standard conguration NO
x
converter with cooling unit
Installation location Under a roof or protected from direct thermal radiation, high dust concentration and
corrosive atmospheres
Not suitable for use in explosion-hazardous areas
Power supply 230 V (+10/–15 %), 50 Hz, 25 A, max. 5 kVA, external max. 3.5 VA
Ambient temperature
during operation
+5 ... +35 ºC (40 … 95 °F)
*)
+5 … 50 °C with built-in cooling unit
+5 ... +35 ºC (40 … 95 °F)
*)
Transport and storage temperature –20 ... +55 ºC (–4 …130 °F)
Relative humidity Class F (DIN 40040), 75 % yearly average, 95 % short-term, non-condensing
Internal pump Suitable for up to 35 m (115 ft) sample gas line
Dimensions (H x W x D) Approx. 1000 x 600 x 500 mm
(40 x 24 x 20 in)
Approx. 1.000 x 800 x 500 mm
(40 x 31.5 x 20 in)
Protection class IP 54, IP 34 with cooling unit IP 34 with cooling unit
Weight Approx. 80 kg (175 lb) Approx. 95 kg (210 lb)
Material Sheet steel enclosure
Calibration Manual, test gas entry via manual valve
Signals 1 analog output/component
Interfaces RS485 (optional)
*) without direct exposure to sunlight
NO
x
converter
Condesate tank
SICK AG | Waldkirch | Germany | www.sick.com
8011822/2009-10 ∙ 3M ∙ Subject to change without notice
  • Page 1 1
  • Page 2 2

SICK MKAS Compact Product information

Type
Product information
This manual is also suitable for

SICK MKAS Compact Analysis System is a complete analyzer system in a small package providing measurement of NOx, CO, SO2, and O2. It includes a particulate filter, flow meter, gas cooler, condensate drain pump, and either the SIDOR or S710 analyzer. It is suitable for emission monitoring and can be configured with options such as a condensate sensor, automatic test gas delivery, 2-stage gas cooler, and NOx converter at the analyzer inlet.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI