Aaeon BOXER-6640 User manual

Last Updated: February 26, 2019

BOXER-6640

Fanless Embedded Box PC

User’s Manual 3

rd

Ed

Preface II

Fanless Embedded Box PC

BOXER

-

66

40

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Fanless Embedded Box PC

BOXER

-

66

40

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

 Microsoft Windows

®

is a registered trademark of Microsoft Corp.

 Intel

®

, Platium

®

, Celeron

®

, and Xeon

®

are registered trademarks of Intel

Corporation

 Atom™ is a trademark of Intel Corporation

All other product names or trademarks are properties of their respective owners.

Preface IV

Fanless Embedded Box PC

BOXER

-

66

40

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

 BOXER-6640

1

 Wallmount bracket

2

 Screw Package

1

 Thermal Pad

1

 3 Pin DC-In Power Connector

1

 2 Pin Remote on/off Connector

1

 Product DVD

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Fanless Embedded Box PC

BOXER

-

66

40

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver

installation instructions (if any), to facilitate users in setting up their product.

Users may refer to the AAEON.com for the latest version of this document.

Preface VI

Fanless Embedded Box PC

BOXER

-

66

40

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

4. Always completely disconnect the power before working on the system’s

hardware.

5. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any power supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls.

12. Do not cover the openings on the device to ensure optimal heat dissipation.

13. Watch out for high temperatures when the system is running.

14. Do not touch the heat sink or heat spreader when the system is running

15. Never pour any liquid into the openings. This could cause fire or electric shock.

16. As most electronic components are sensitive to static electrical charge, be sure

to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and contain all electronic components

in any static-shielded containers.

Preface VII

Fanless Embedded Box PC

BOXER

-

66

40

17. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

18. Do not leave this device in an uncontrolled environment with temperatures

beyond the device’s permitted storage temperatures (see chapter 1) to prevent

damage.

19. Do NOT disassemble the motherboard so as not to damage the system or void

your warranty.

20. If the thermal pad had been damaged, please contact AAEON's salesperson to

purchase a new one. Do NOT use those of other brands.

21. The Hex Cylinder Coppers on the front panel are not removable.

22. Repeatedly assemble and disassemble the system may cause damages to the

exterior paint and surface and screw holes.

23. Use the right size screwdriver.

24. Use the screwdriver correctly to remove screws from the system.

Preface VIII

Fanless Embedded Box PC

BOXER

-

66

40

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept

any interference received including interference that may

cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le

constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et

les directives gouvernementales de recyclage.

Preface IX

Fanless Embedded Box PC

BOXER

-

66

40

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON Embedded Box PC/ Industrial System

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

外壳

○

中央处理器

与内存

○

硬盘

○

电源

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Preface X

Fanless Embedded Box PC

BOXER

-

66

40

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

AAEON Embedded Box PC/ Industrial System

Component

Poisonous or Hazardous Substances or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

PCB & Other

Components

○

Wires &

Connectors

for External

Connections

○

Chassis

○

CPU & RAM

○

Hard Disk

○

PSU

○

O：The quantity of poisonous or hazardous substances or elements found in each of the

component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least one of the

component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this product is applicable under normal

usage only

 
 
Preface    XI 
Fanless Embedded Box PC
 
 
 
BOXER
-
66
40
 
Table of Contents 
 
Chapter 1 - Product Specifications .........................................................................................1 
1  Specifications ................................................................................................................. 2 
Chapter 2 – Hardware Information ....................................................................................... 5 
1  BOXER-6640-A1 Dimensions .................................................................................... 6 
2  BOXER-6640-A2 Dimensions.................................................................................... 9 
3  Jumpers and Connectors .......................................................................................... 12 
4  List of Jumpers .............................................................................................................. 14 
5  Block Diagram .............................................................................................................. 15 
6  List of Connectors ........................................................................................................ 16 
6.1  Setting Jumpers ........................................................................................... 18 
6.2  Clear CMOS (JP6) ........................................................................................ 18 
6.3  Auto Power Button (JP1) ............................................................................ 19 
6.4  Mini Card Connector With on board SIM ........................................... 19 
6.5  (SATA1/ SATA2/ SATA3) SATA Port .......................................................... 21 
6.6  (PWR1/ PWR2/ PWR3) SATA PWR Port ................................................ 21 
6.7  LAN + USB 3.0 ............................................................................................ 22 
6.8  VGA port ....................................................................................................... 23 
6.9  DC-IN ............................................................................................................. 23 
6.10  HDMI port .................................................................................................... 24 
6.11  DIO port ........................................................................................................ 25 
6.12  Remote switch connector ........................................................................ 25 
6.13  COM Port ...................................................................................................... 26 
7  CPU Installation ........................................................................................................... 27 
8  DDR4 Memory Module Installation ...................................................................... 30 
9  2.5” SATA Drive Installation ...................................................................................... 32 
10  Power Connector Installation .................................................................................. 34 

 
 
Preface    XII 
Fanless Embedded Box PC
 
 
 
BOXER
-
66
40
 
Chapter 3 - AMI BIOS Setup ................................................................................................ 35 
1  System Test and Initialization .................................................................................. 36 
2  AMI BIOS Setup........................................................................................................... 37 
3  Setup Submenu: Main............................................................................................... 38 
4  Setup Submenu: Advanced ..................................................................................... 39 
4.1  Advanced: CPU Configuration ............................................................... 40 
4.2  Advanced: SATA Configuration ............................................................... 41 
4.3  Advanced: PCH-FW Configuration....................................................... 42 
4.3.1 PCH-FW Configuration: Firmware Update Configuration .. 43 
4.4  Advanced: SIO Configuration ................................................................ 44 
4.4.1 SIO Configuration: Serial Port 1 Configuration ....................... 45 
4.4.2 SIO Configuration: Serial Port 2 Configuration ...................... 46 
4.4.3 SIO Configuration: Serial Port 3 Configuration ...................... 47 
4.4.4 SIO Configuration: Serial Port 4 Configuration ...................... 48 
4.5  Advanced: Hardware Monitor ................................................................ 49 
4.6  Advanced: USB Configuration................................................................ 50 
4.7  Advanced: Digital IO Port Configuration ............................................. 51 
4.8  Advanced: Power Management ............................................................ 52 
5  Setup submenu: Chipset .......................................................................................... 53 
5.1  Chipset: System Agent (SA) Configuration ........................................ 54 
5.1.1  System Agent (SA) Configuration: Graphics Configuration 55 
5.2  Chipset: PCH-IO COnfiguration ............................................................ 56 
6  Setup submenu: Security ......................................................................................... 57 
7  Setup submenu: Boot................................................................................................ 58 
8  Boot: BBS Priorities ..................................................................................................... 59 
9  Setup submenu: Save & Exit ................................................................................... 60 
Chapter 4 – Drivers Installation ........................................................................................... 61 
1  Product CD/DVD ........................................................................................................ 62 

Preface XIII

Fanless Embedded Box PC

BOXER

-

66

40

Appendix A - Watchdog Timer Programming................................................................... 66

A.1 Watchdog Timer Initial Program............................................................................ 67

Appendix B - I/O Information .............................................................................................. 72

B.1 I/O Address Map ........................................................................................................ 73

B.3 IRQ Mapping Chart.................................................................................................... 75

Appendix C - Electrical Specifications for I/O Ports .......................................................... 76

C.1 DIO Programming ...................................................................................................... 77

C.2 DIO Register ................................................................................................................. 78

C.3 DIO Sample Program ................................................................................................ 79

Fanless Embedded Box PC

BOXER

-

66

40

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Fanless Embedded Box PC

BOXER

-

66

40

1.1 Specifications

System

CPU

Intel® Core™ i7-7700T, Quad Core, 2.9 GHz

Intel® Core™ i5-7600T, Quad Core, 2.8 GHz

Intel® Core™ i3-7300T, Dual Core, 3.5 GHz

Intel® Core™ i7-6700TE, Quad Core, 2.4 GHz

Intel® Core™ i5-6500TE, Quad Core, 2.3 GHz

Intel® Core™ i3-6100TE, Dual Core, 2.7 GHz

Chipset

Intel® H110

System Memory

DDR4 SODIMM socket (double deck) x 2

Supports 1866/2133MHz DDR4 and up to

32GB

Supports un-buffered and ECC / non-ECC type

SODIMM

Display Interface

VGA x 1, HDMI x 2 (Combo DP x 2) – A1 SKU

VGA x 1 – A2 SKU

Storage Device

mSATA, SATA HDD/SSD

Ethernet

Intel® I211AT x 1, I219LM x 1

I/O

2 pin Remote power on/off connector Audio x1

(MIC-in, Line-out)

USB 2.0 x 3

DB-9 x 3 for RS-232

8-bit DIO

DB-9 x 1 for RS-232/422/485 with auto flow

control Power ON/OFF switch x 1

3 pin 9~36V DC Power input x 1 (+, - , GND)

VGA x 1

HDMI x 2 (Combo DP x 2)

USB 3.0 x 4

RJ-45 x 2 for GbE (i211AT x 1, i219LM x 1)

Chapter 1 – Product Specifications 3

Fanless Embedded Box PC

BOXER

-

66

40

System

Expansion

Full-size Mini-Card x 1 (PCI-E + USB, w/ SIM

slot)

Full-size Mini-Card x 1 (mSATA + USB)

LPC x 1

Indicator

Power LED HDD active LED

OS Support

Windows® 10 64 bit (Kabylake, Skylake CPU)

Windows® 8.1 64 bit (Skylake CPU only)

Windows® embedded 8 standard 64 bit

(Skylake CPU only)

Mechanical

Mounting

Wallmount

Dimensions (W x H x D)

10.39" x 3.8" x 7.33" (264mm x 96.4mm x

186.2mm)

Gross Weight

12.76 lb (5.8 kg)

Net Weight

9.9 lb (4.5 kg)

Environmental

Operating Temperature

-4°F ~ 131°F (-20°C ~ 55°C) (according to

IEC68-2-14 with 0.5 m/s AirFlow; with industrial

devices)

Storage Temperature

-49 °F ~ 176°F (-45°C ~ 80°C)

Storage Humidity

5 ~ 95% @ 40°C, non-condensing

Anti-Vibration

2 Grms/ 5 ~ 500Hz/ operation – SSD 1 Grms/ 5

~ 500Hz/ operation – HDD

Certification

CE/FCC class A

Chapter 1 – Product Specifications 4

Fanless Embedded Box PC

BOXER

-

66

40

Power Supply

Power Requirement

3-pin Phoenix DC Input 9~36V

Fanless Embedded Box PC

BOXER

-

66

40

Chapter 2

Chapter 2 – Hardware Information

Chapter 2 – Hardware Information 6

Fanless Embedded Box PC

BOXER

-

66

40

2.1 BOXER-6640-A1 Dimensions

264.15

298.15

186.20

100.00

282.15

186.20

110.42

186.20

96.42

BOXER- 6640

264.15

298.15

186.20

100.00

282.15

186.20

110.42

186.20

96.42

BOXER- 6640

Chapter 2 – Hardware Information 7

Fanless Embedded Box PC

BOXER

-

66

40

264.15

298.15

186.20

100.00

282.15

186.20

110.42

186.20

96.42

BOXER- 6640

264.15

298.15

186.20

100.00

282.15

186.20

110.42

186.20

96.42

BOXER- 6640

Page is loading ...

Aaeon BOXER-6640 User manual

Aaeon BOXER-6640 User manual

Related papers

Other documents