Hirschmann OWL 4G North America User manual

Hirschmann
Brand
Hirschmann
Model
OWL 4G North America
Category
Networking
Type
User manual
User Manual
Installation
Industrial Cellular Router
OWL 4G North America
UM Installation OWL 4G North America
Release 02 - 02/2020
Technical support
https://hirschmann-support.belden.com
The naming of copyrighted trademarks in this manual, even when not specially indicated,
should not be taken to mean that these names may be considered as free in the sense of the
trademark and tradename protection law and hence that they may be freely used by anyone.
c
2020 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reser ved. The copying, repro-
duction, translation, conversion into any electronic medium or machine scannable form is not
permitted, either in whole or in part. An exception is the preparation of a backup copy of the
software for your own use.
The performance features described here are binding only if they have been expressly agreed
when the contract was made. This document was produced by Hirschmann Automation and
Control GmbH according to the best of the company’s knowledge. Hirschmann reserves the
right to change the contents of this document without prior notice. Hirschmann can give no
guarantee in respect of the correctness or accuracy of the information in this document.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
You can get the latest version of this manual on the Internet at the Hirschmann product site
(http://www.hirschmann.com).
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
UM Installation OWL 4G North America 2020-02-05
Contents
1 Safety Instructions 8
2 FCC note 11
3 About this Manual 12
4 Router Description 13
4.1 Usage of the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Contents of Package 16
6 Router Design 17
6.1 Router Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.2 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6.3 Basic Dimensions of the Router Box (specified in mm) . . . . . . . . . . . . . . . 19
6.4 Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.5 Removing from the DIN Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.6 Description of the Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.6.1 Status Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.6.2 Power Connector PWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.6.3 Ethernet Port ETH0 and ETH1 . . . . . . . . . . . . . . . . . . . . . . . . 25
6.6.4 ANT, DIV, GNSS and WiFi Antenna Connectors . . . . . . . . . . . . . . . 26
6.6.5 Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.7 Description of the Left Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6.7.1 SIM Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.7.2 Serial Interfaces and I/O Port . . . . . . . . . . . . . . . . . . . . . . . . . 31
6.8 Description of the Right Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7 First Use 34
7.1 Connecting the Router Before First Use . . . . . . . . . . . . . . . . . . . . . . . 34
7.2 Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
7.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
7.3.1 Configuration using a Web Browser . . . . . . . . . . . . . . . . . . . . . 34
8 Maintenance and Service 36
9 Technical Parameters 37
9.1 Basic Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
9.2 Standards and Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
9.3 Type Tests and Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . 39
9.4 Technical Parameters of Cellular Module . . . . . . . . . . . . . . . . . . . . . . . 40
9.5 Technical Parameters of WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
9.6 Technical Parameters of GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.7 Other Technical Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
UM Installation OWL 4G North America
Release 02 - 02/2020
3
10 Related Documents 42
11 Further Support 43
4
UM Installation OWL 4G North America
Release 02 - 02/2020
List of Figures
1 Access to the Internet from LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2 Backed up access to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Using VPN tunnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4 Serial Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5 Version without WiFi and GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6 Version with WiFi and GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
7 Basic dimensions of the router box . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8 Basic dimensions of the router box . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9 Default position of DIN rail clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
10 Removing from the DIN rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11 The front panel of the router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
12 Power connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
13 Connection of power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14 Ethernet connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
15 Connection of Ethernet cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
16 Connecting the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
17 Router reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
18 The left panel of the router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
19 SIM card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
20 Serial + I/O connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
21 Functional scheme of the binary interface . . . . . . . . . . . . . . . . . . . . . . 32
22 The right panel of the router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
UM Installation OWL 4G North America
Release 02 - 02/2020
5
List of Tables
1 Contents of package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2 Router versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3 Order Codes Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4 Description of the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5 Status indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6 Connection of power connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7 Connection of Ethernet connector . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
8 Overview of router reboot and reset . . . . . . . . . . . . . . . . . . . . . . . . . . 28
9 Description of the left panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
10 Connection of RS485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
11 Connection of I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
12 Connection of RS232 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
13 Description of the right panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
14 Basic parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
15 Standards and regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
16 Type tests and environmental conditions . . . . . . . . . . . . . . . . . . . . . . . 39
17 Technical parameters of cellular module . . . . . . . . . . . . . . . . . . . . . . . 40
18 Technical parameters of WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
19 Technical parameters of GNSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
20 Other technical parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6
UM Installation OWL 4G North America
Release 02 - 02/2020
Used Symbols
Danger – Information regarding user safety.
Note – Problems that can arise in specific situations.
Information – Useful tips or information of special interest.
Example – Example of function, command or script.
UM Installation OWL 4G North America
Release 02 - 02/2020
7
1 Safety Instructions
WARNING
UNCONTROLLED MACHINE ACTIONS
To avoid uncontrolled machine actions caused by data loss, configure all the data transmis-
sion devices individually.
Before you start any machine which is controlled via data transmission, be sure to complete
the configuration of all the data transmission devices.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
• General safety instructions
You operate this device with electricity. Improper usage of the device entails the risk
of physical injury or significant property damage. The proper and safe operation of this
device depends on proper handling during transportation, proper storage and installation,
and careful operation and maintenance procedures.
X Before connecting any cable, read this document, and the safety instructions and
warnings.
X Operate the device with undamaged components exclusively.
X The device is free of any service components. In case of a damaged or malfunc-
tioning device, turn off the supply voltage and return the device to Hirschmann for
inspection.
X Only routers with appropriate certification and labelling should be used in locations
where flammable and explosive materials are present, including gas stations, chem-
ical plants, or locations in which explosives are used. We remind users of the duty
to observe the restrictions concerning the utilization of radio devices at such places.
X Switch of f the router when travelling by plane. Utilization of the router on a plane
may endanger the operation of the plane or interfere with the mobile telephone net-
work, and may be unlawful. Failure to observe these instructions may result in the
suspension or cancellation of telephone services for the respective client and/or may
result in legal sanctions.
• Certified usage
X Use the product only for the application cases described in the Hirschmann product
information, including this manual.
X Operate the product only according to the technical specifications. See "Technical
Parameters".
X Connect to the product only components suitable for the requirements of the specific
application case.
8
UM Installation OWL 4G North America
Release 02 - 02/2020
• Installation site requirements
X When you are selecting the installation location, make sure you observe the climatic
threshold values specified in the technical data.
X Operate the device at the specified ambient temperature (temperature of the ambient
air at a distance of 2 in (5 cm)).
X Use the device in an environment with a maximum pollution degree that complies
with the specifications in the technical data.
X Turn off the router and disconnect it from power supply before handling the SIM card.
X Caution! The SIM card could be swallowed by small children.
X Power supply must not exceed 60 V DC max.
X When using the router in close proximity to personal medical devices, such as car-
diac pacemakers or hearing aids, you must proceed with heightened caution.
X The router may cause interference when used in close proximity to TV sets, radio
receivers or personal computers.
• Device casing
Only technicians authorized by the manufacturer are permitted to open the casing.
X Never insert sharp objects (narrow screwdrivers, wires, etc.) into the contacts for
electric conductors and do not touch the contacts.
• Qualification requirements for personnel
X Only allow qualified personnel to work on the device.
Qualified personnel have the following characteristics:
X Qualified personnel are properly trained. Training as well as practical knowledge
and experience make up their qualifications. This is the prerequisite for grounding
and labeling circuits, devices, and systems in accordance with current standards in
safety technology.
X Qualified personnel are aware of the dangers that exist in their work.
X Qualified personnel are familiar with appropriate measures against these hazards in
order to reduce the risk for themselves and others.
X Qualified personnel receive training on a regular basis.
• National and international safety regulations
X Verify that the electrical installation meets local or nationally applicable safety regu-
lations.
X When installing antennas, observe the regulations of the country in which you are
operating the WLAN device with regard to the general operating permission and the
maximum emission levels.
X Install and operate this equipment with a minimum distance of 7.9 in (20 cm) between
the antenna and your body.
• Recycling note
After usage, this device must be disposed of properly as electronic waste, in accordance
with the current disposal regulations of your county, state, and country.
UM Installation OWL 4G North America
Release 02 - 02/2020
9
• Grounding the device
The device is grounded via the grounding screw.
X Shielding ground
The shielding ground of the connectable twisted pair cable is connected to the
grounding connector as a conductor.
X Beware of possible short circuits when connecting a cable section with conductive
shielding braiding.
• Data backup
X It is recommended that you create an appropriate copy or backup of all important
settings that are stored in the memory of the device.
10
UM Installation OWL 4G North America
Release 02 - 02/2020
2 FCC note
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
OWL 4G North America
U.S. Contact Information
Belden – St. Louis
1 N. Brentwood Blvd. 15th Floor
St. Louis, Missouri 63105, United States
Phone: 314.854.8000
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the inter ference by one or
more of the following measures:
• Reposition the receiver antenna or change the angle of the receiver antenna.
• Increase the separation between the device and the receiver.
• Connect the device to a different outlet on a different power supply cable from that to
which the receiver is connected.
• Consult a specialist retailer or an electronic systems engineer for help.
Changes or modifications not expressly approved by the holder of the certificate could void
the user’s authority to operate this equipment.
For devices with Cellular Module only:
Contains Transmitter Module
FCC ID: XMR201808EC25AF
IC ID: 10224A-2018EC25AF
For devices with Cellular Module and WiFi Module:
Contains Transmitter Module
FCC ID: XMR201808EC25AF
IC ID: 10224A-2018EC25AF
Contains Transmitter Module
FCC ID: SQG-60SIPT
IC ID: 3147A-60SIPT
UM Installation OWL 4G North America
Release 02 - 02/2020
11
3 About this Manual
The "Instalation" user manual contains a device description, safety instructions, a description
of the display, and the other information that you need to install the device.
Documentation mentioned in the "User Manual Installation" that is not supplied with your
device as a printout can be found as PDF files for downloading on the Internet at:
https://www.doc.hirschmann.com/.
12
UM Installation OWL 4G North America
Release 02 - 02/2020
4 Router Description
OWL 4G North America is an industrial cellular router intended for the North American market
(NAM). This router is an ideal device for wireless communication in mobile networks that make
use of LTE and WCDMA technology. Due to the high speed of data transfer up to 150 Mbps
(download) and up to 50 Mbps (upload) is this router an ideal solution for specialized M2M
devices and IoT as well as for wireless connection of traffic and security camera systems,
individual computers, LAN networks, automatic teller machines (ATM) and other self-service
terminals.
The standard configuration includes two Ethernet 10/100 ports, serial line RS232, RS485,
one binary input and one output. The device also has two readers for 3 V and 1.8 V SIM
cards, which are located on the left panel of the router. The router can be equipped with a WiFi
module, but this must be part of the initial configuration – it cannot be added to the router at
some point in the future. The router can be provided only in a metal casing.
Configuration of the router may be done via a password-protected Web interface. Web in-
terface provides detailed statistics about the router’s activities, signal strength, detailed system
log etc. The router supports the creation of VPN tunnels using IPSec, OpenVPN and L2TP to
ensure safe communication. DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, backup
primary connection and many other functions are supported.
The router provides diagnostic functions which include automatically monitoring the PPP
connection, automatic restart in case of connection losses, and a hardware watchdog that
monitors the router status. The user may insert Linux scripts which are started on various
actions. It is possible to create up to four different configurations for the same router. These
configurations can be switched whenever necessary via Web interface, SMS or binary input
status. The router can automatically upgrade its configuration and firmware from your central
server. This allows for mass reconfiguration of numerous routers at the same time.
Examples of possible applications
• mobile office
• fleet management
• security system
• telematic
• telemetric
• remote monitoring
• vending and dispatcher machines
UM Installation OWL 4G North America
Release 02 - 02/2020
13
4.1 Usage of the Router
The router is primarily intended for these four basic situations:
I. Access to the Internet from LAN
Figure 1: Access to the Internet from LAN
II. Backed up access to the Internet (from LAN)
Figure 2: Backed up access to the Internet
14
UM Installation OWL 4G North America
Release 02 - 02/2020
III. Secure networks interconnection or using VPN
Figure 3: Using VPN tunnel
IV. Serial Gateway
Figure 4: Serial Gateway
UM Installation OWL 4G North America
Release 02 - 02/2020
15
5 Contents of Package
The standard set of router includes items listed in following table:
Item#
Description
Figure Q’ty
1
Router
1 pcs
2
DIN holder
(screwed on the router)
1 pcs
3
Wing on wall mounting
(screwed on the router)
2 pcs
4
2-pin terminal block for power supply
(deployed on the router)
1 pcs
5
10-pin terminal block for RS232,
RS485 and I/O
(deployed on the router)
1 pcs
6
Printed "General Safety Instructions"
1 pcs
7
Printed "Open Source Information
OWL Family"
1 pcs
Table 1: Contents of package
16
UM Installation OWL 4G North America
Release 02 - 02/2020
6 Router Design
6.1 Router Versions
OWL 4G North America router is supplied in the following versions (see table below). All
versions are available in metal box.
Router versions
SIM
BIN
BOUT
ETH
WiFi
GNSS
RS232
RS485
Version without WiFi and GNSS 2 x 1 x 1 x 2 x 1 x 1 x
Version with WiFi and GNSS 2 x 1 x 1 x 2 x 1 x 1 x 1 x 1 x
Table 2: Router versions
Figure 5: Version without WiFi and GNSS
Figure 6: Version with WiFi and GNSS
UM Installation OWL 4G North America
Release 02 - 02/2020
17
6.2 Order codes
Order codes overview is shown in the table below.
Product type Product name Order code Features – interfaces
OWL 4G OWL 4G
North America
942 284-001 LTE module for NAM, 2x ETH, 1x BI, 1x BO,
1x RS232, 1x RS485, 2x SIM reader
OWL 4G OWL 4G
North America +
WLAN
942 284-101 LTE module for NAM, 2x ETH, 1x BI, 1x BO,
1x RS232, 1x RS485, 2x SIM reader, WiFi,
GNSS
Table 3: Order Codes Overview
18
UM Installation OWL 4G North America
Release 02 - 02/2020
6.3 Basic Dimensions of the Router Box (specified in mm)
Figure 7: Basic dimensions of the router box
Figure 8: Basic dimensions of the router box
UM Installation OWL 4G North America
Release 02 - 02/2020
19
6.4 Mounting Recommendations
Router can be placed:
• on a flat surface,
• on a wall (or other surface) using the side wings,
• on a DIN rail EN 60715 with the included metal DIN rail clip.
If the negative pole of the router is grounded, there is no protection against reversed
polarity! The only protection left is the fuse inside the device. Only the service center can
restore the router’s functionality.
20
UM Installation OWL 4G North America
Release 02 - 02/2020
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Hirschmann OWL 4G North America User manual

Hirschmann
Brand
Hirschmann
Model
OWL 4G North America
Category
Networking
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents