Beyerdynamic Unite CC-24P User manual

Brand: Beyerdynamic

Model: Unite CC-24P

Type: User manual

This manual is also suitable for

Beyerdynamic Unite CC-24P is a charging, transport, and storage case for up to 24 bodypack receivers or transmitters. It features a network connection and integrated power supply, making it easy to keep your devices charged and ready to use. The Unite CC-24P also has a pairing function that allows you to quickly and easily pair your transmitters and receivers.

UNITE CC

COCKPIT CASE

QUICK START GUIDE

KURZANLEITUNG

english

Unite CC – Cockpit Case

The Unite CC cockpit case belongs to the wireless Unite system from beyerdynamic. For detailed descriptions of the

use, please refer to the operating instructions for the entire system, which you can download from the internet at:

www.beyerdynamic.com/unite

1. Safety instructions

General

• READ the operating instructions.

• KEEP the operating instructions.

• HEED all warnings.

• FOLLOW all instructions.

Disclaimer

• beyerdynamic GmbH & Co. KG will not be liable if any damage, injury or accident occurs due to negligent, incorrect

or inappropriate operation of the product.

1. Read these inructions.

2. Keep these inructions.

3. Heed all warnings.

4. Follow all inructions.

5. Do not use this device near water.

The lightning flash within an equilateral triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the device that may be sufficient enough to constitute a risk of electric shock to

users.

The exclamation mark within an equilateral triangle is intended to ale the user to the presence of impoant

operating and maintenance inructions in the literature accompanying the product.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Inall in accordance with the manufacturer’s inructions.

8. Do not inall near any heat sources such as radiators, heat regiers, oves, or other device (including amplifiers)

that produce heat.

9. For safety purposes do not make any changes to the polarized or grounding type plug. A polarized plug has two

contacts with one wider than the other. A grounding type plug has two contacts and a third grounding prong. The

wide contact or the third prong are provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord by not walking or anding on it or pinching, this is considered for plugs especially where

they exit from the device.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the ca, and, tripod, bracket, or table specified by the manufacturer, or sold with the device. When

a ca is used, use caution when moving the ca/device combination to avoid injury from tipping over.

13. Unplug this device during lightning orms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any

way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device,

the device has been exposed to rain or moiure, does not operate normally, or has been dropped.

Location

• The equipment must be set up so that the mains switch, mains plug and all connections on the rear of the device are

easily accessible.

• If you transport the equipment to another location take care to ensure that it is adequately secured and can never

be damaged by being dropped or by impacts on the equipment.

Fire hazard

• Never place naked flames (e.g. candles) near the equipment.

Unite CC – Cockpit Case

english

Unite CC – Cockpit Case

Humidity / heat sources

• Never expose the equipment to rain or a high level of humidity. For this reason do not install it in the immediate

vicinity of swimming pools, showers, damp basement rooms or other areas with unusually high atmospheric humidity.

• Never place objects containing liquid (e.g. vases or drinking glasses) on the equipment. Liquids in the equipment

could cause a short circuit.

• Do not install near any heat sources such as radiators, heat registers, stoves or other device (including amplifiers)

that produce heat.

Connection

• The equipment must be connected to a mains socket that has an earth contact.

• Protect the power cord by not walking or anding on it or pinching, this is considered for plugs especially where they

exit from the device.

• Lay all connection cables so that they do not present a trip hazard.

• Whenever working on the equipment switch off all inputs and outputs to the power supply.

• Check whether the connection figures comply with the existing mains supply. Serious damage could occur due to

connecting the system to the wrong power supply. An incorrect mains voltage could damage the equipment or

cause an electric shock.

• Please note that different operating voltages require the use of different types of power cable and plugs.

Please refer to the following table:

• If the equipment causes a blown fuse or a short circuit, disconnect it from the mains and have it checked and repaired.

• Do not hold the mains cable with wet hands. There must be no water or dust on the contact pins. In both cases you

could receive an electric shock.

Voltage Power plug according to andard

110 - 125 V UL817 and CSA C 22.2 no. 42.

220 - 230 V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.

240 V BS 1363 (1984): “Specification for 13A fused plugs and switched and un-switched socket outlets.”

Unite CC – Cockpit Case

• The mains cable must be firmly connected. If it is loose there is a fire hazard.

• Always pull out the mains cable from the mains and/or from the equipment by the plug – never by the cable. The

cable could be damaged and cause an electric shock or fire.

• Do not use the equipment if the mains plug is damaged.

• If you connect defective or unsuitable accessories, the equipment could be damaged. Only use connection cables

available from or recommended by beyerdynamic.

Switching off

• When switching off the device, also disconnect the power plug from the power socket. Make sure that you do not

pull on the cable, but on the power plug.

Ventilation

• Do not insert objects into the ventilation grilles or other openings. You could damage the equipment and/or injure

yourself.

Disconnect

• For pluggable equipment, the socket-outlet shall be near the equipment and shall be easily accessible.

Maintenance

• Only clean the equipment with a slightly damp or dry cloth. Never use solvents as these damage the surface.

Trouble shooting and servicing

• Never open the device yourself. You could receive an electric shock. There are no user-serviceable parts inside.

• Leave all service work to authorised expert personnel.

english

Unite CC – Cockpit Case

Disposal

This symbol on the product, in the instructions or on the packaging means that your electrical

and electronic equipment should be disposed at the end of its life separately from your house-

hold waste. There are separate collection systems for recycling in the EU. For more information,

please contact the local authority or your retailer where you purchased the product.

Battery disposal

This symbol means that according to local laws and regulations your product and/or its battery

shall be disposed of separately from household waste. When this product reaches its end of life,

take it to a collection point designated by local authorities. The separate collection and recycling

of your product and/or its battery at the time of disposal will help conserve natural resources and

ensure that it is recycled in a manner that protects human health and the environment.

• Old batteries may contain substances that are harmful to your health and environment.

• Dispose used batteries always according to the applicable disposal regulations. Please do not

throw used battery packs into the fire (danger of explosion) or your household rubbish, take

them to your local collection points. The return is free and required by law. Please dispose

discharged batteries only.

• All batteries are recycled to reclaim valuable material such as iron, zinc or nickel.

Charging

• A completely new battery may need to be charged and discharged several times before it has reached its full

change capacity.

• Do not throw used batteries in the household wae, but hand them over to the local collection points.

• High ambient temperatures during charging (> +40 °C) aect the eiciency of the charging process and the lifetime

of the rechargeable battery.

Unite CC – Cockpit Case

2. Versions

Unite CC-24P Case for charging, transport and storage,

with max. 24 charging compartments for bodypack receivers / transmitters,

network connection, integrated power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 713.074

Unite CC-36P same as above, but with max. 36 charging compartments

for bodypack receivers / transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 728.306

3. Supplied accessories

Power cable

Key

Quick Start Guide

4. Optional accessories

Unite CC Bag Storage bag for optional accessories (e.g. headphones) . . . . . . . . . . . . . . . . . . . . . Order # 713.066

english

Unite CC – Cockpit Case

5. Controls and indicators

Top view of Unite CC-24P version

 Button for initiating the

pairing process or

clearing stored pairing in-

formation in the charger

 Status indicator light for

pairing status

 Switch for “Pair & Charge”

or “Charge only”

 Charging units with

4 charging compartments

each

 Slots for more optional

charging units or one

optional charging unit

and one optional

compartment for storing

the Unite TH handheld

transmitter

  

    

Pair/Reset

Status

• Pair & Charge

• Charge only







Unite CC – Cockpit Case

Rear view

 Reset button

 Ethernet connection

 USB connection

 Mains connection

 Fuse drawer (2 x 3.15 A fuse, time-lag)

 On-off switch

     

english

Unite CC – Cockpit Case

6. How to operate the Cockpit case

The Unite CC cockpit case is used for charging the rechargeable batteries inside the bodypack transmitters and

receivers as well as transmitting the pairing information from the transmitter to the receivers. The Unite CC-24P has

6 charging units, each with 4 charging compartments so that a maximum of 24 bodypack transmitters or receivers can

be charged simultaneously. The Unite CC-36P has 9 charging units each with 4 charging compartments so that a

maximum of 36 charging compartments are available.

Warning: When the Cockpit case is in use, do not mount the cover on the case. There is a risk of overheating and fire.

6.1 Mains connection

• Connect the IEC connector of the power cable to the mains connection of the Cockpit case. Connect the power plug

to a power outlet.

• Switch on the Cockpit case via the on-o switch.

• When not in use, switch o the device and disconnect the power plug from the power socket. Make sure that you do

not pull on the cable, but on the power plug.

6.2 Establish pairing

Transmitters and receivers must be paired so that they can communicate with each other. For a successful

pairing the channel name, group ID and audio encryption key are required. The required audio encryption

key is generated in the Unite CC cockpit case or via the Unite Manager software and during the pairing

process it is first stored on the cockpit case and then it is transferred to the transmitter and receiver in the

charging compartments. In this context, please also note the position of the switch on the cockpit case. The

switch must be set to the “Pair & Charge” position so that the pairing information can be transmitted from

the Unite CC to the transmitters and receivers.

There are three different ways to pair the Unite transmitters with receivers:

1. Via an individual charger (refer to the following description or system manual online).

2. Using the Unite Manager Software on a PC (refer to the Unite Manager Software manual or system

manual online).

3. Via dynamic channel search (refer to system manual online, chapter “Special functions”.

Unite CC – Cockpit Case

Use with group ID 256

By default, the transmitters and receivers are supplied with the group ID 256. A common factory-set audio

encryption key, which cannot be changed, is used for the group ID range of 150 to 256.

The audio encryption key ensures additional security against unauthorised listening during the wireless

transmission. Due to the factory-set audio encryption key the devices within the group ID range of 150 to 256

can connect to each other without pairing via the charger. In this case receivers can connect to transmitters

via the dynamic channel search.

Example: Via the dynamic channel search, a receiver which is set to the group ID 160 will find all transmitters

which are active and also set to the group ID 160. The receiver will not find transmitters beyond the set ID

range of 160.

Attention: When using several transmitters (e.g. Unite AP4 and several Unite TP) with the same group ID at

the same time, make sure that the individual channel names differ from each other! Otherwise this can

cause connection problems with the receivers!

Use with individual group ID

If several receivers are to be divided into different groups with an individual encryption, for each group an

individual group ID between 1 and 149 can be assigned. A separate audio encryption key is generated for

an individual group ID in order to ensure additional security against unauthorised listening during the wire-

less transmission. This audio encryption key is generated during the pairing process, stored in the charger

and transmitted from the charger to the transmitter and receiver, along with the channel name and group

ID.

Since the audio encryption key is not transmitted via radio, it cannot be read out. This gives the system

maximum security against unauthorised listening.

The receivers can only connect to a transmitter with which they have been paired via the charger. If the

group ID is subsequently set manually on a receiver which has not been paired, no connection can be

established to the transmitter with the encrypted group ID, because the receiver does not have the audio

encryption key.

english

Unite CC – Cockpit Case

In order to perform a pairing with an individual charger, proceed as described in the following:

1. Set the desired group ID on the transmitter you want to use for pairing. Refer also to chapter 5.2 of the “Unite TP –

Bodypack Transmitter”.

2. Insert only one transmitter into the charging compartment of the charger. If multiple transmitters are inserted into

the charging compartments, the pairing will not start and the status indicator  on the charger will display an

error (see table). Alternatively, you can connect the transmitter to the USB port, type C on the charger via a USB

cable.

3. Insert one or more receivers into the charging compartments of the charger to be paired with the transmitter. You

can also connect another receiver to the charger using the USB port. Remove all receivers that should not be

paired. If there is no receiver in the charging compartments, the pairing information is stored in the charger. This is

used for later pairing without connecting the transmitter to the charger.

4. In order to transfer the pairing information from the transmitter to the receivers in the slots and to the charger itself

for future pairing, press and hold the “Pair/Reset” button  on the charger for more than 2 seconds. The status

indicator  will flash yellow for several seconds if the pairing is successful. The status indicator will then remain

yellow because the pairing information is now also stored in the charger.

5. If you want to pair other receivers, remove the transmitter and all receivers from the charger, set the switch 

to “Pair & Charge” and insert the unpaired receivers into the charger. The pairing information will be stored

immediately in the unpaired receivers. The status indicator on the receiver will flash yellow rapidly while this

happens.

6. Set the switch  back to “Charge only” when the pairing is finished, so that the charger can only be used for

recharging.

7. Switch on the transmitter and one receiver to check that they have both been paired successfully.

After a few seconds, the status indicator on the receiver should light up green and the display should show the

channel name of the transmitter.

8. If you want to clear the stored pairing information, hold down the “Pair/Reset” button  for more than five seconds.

The status indicator  will then remain permanently green.

Unite CC – Cockpit Case

Indicator light Operating status

Off Device is switched off

Green • Device is ready to use

• No pairing information saved

Flashing yellow Pairing information is being copied to the charger or receiver

Yellow Pairing information has been stored in the charger

Flashing green/yellow Device is being localised

Flashes red 5 times • No transmitter

• Too many transmitters

Flashing red rapidly • Operating error

• Charging error

When in the pairing mode (switch set to “Pair & Charge”) the status indicator  on the charger shows the

following information:

english

Unite CC – Cockpit Case

6.3 Charging

1. Set the switch  to “Charge only”.

2. Insert the bodypack receivers / transmitters into the charging compartments so that the charging contact of the

transmitters / receivers have contact with those in the charging unit.

3. Charging will start automatically.

4. The state of charge of the batteries is indicated by the LED of the appropriate device:

Indicator light Charging status

Off Device is switched off

Flashing green slowly Charging 0 - 100%

Green Battery is charged

Flashing yellow slowly Pairing information is being copied from the transmitter

Yellow for 10 seconds Device information is copied successfully to charger/devices

Flashes red slowly for 10 seconds • Too many transmitters in the charger when pairing is initiated

• Other pairing error

Flashing green/yellow rapidly Device is being localised

Flashing red rapidly Charging error

Unite CC – Cockpit Case

6.4 Automatic Firmware Update

• By using the Unite Cockpit Case you can upload firmware updates to Unite transmitters/receivers.

• With the current factory setting the Unite Cockpit Case will automatically update the firmware of the Unite

transmitters/receivers during the first charging process. Just insert the transmitters/receivers into the charging

compartments.

During the firmware update the status indicator light of the Unite transmitters/receivers will illuminate red. This

process will take approx. 5 minutes. Should the process take longer than 10 minutes, turn the Unite Cockpit Case off

and on again. The update process will then restart.

Attention:

Please note that after a successful update to a new firmware version, the Unite transmitters/receivers are no longer

compatible with older firmware versions.

6.5 Conditioning the battery

• In order to achieve the maximum capacity of the battery, we recommend discharging the transmitters/receivers

completely to carry out a complete charging cycle afterwards.

• This also increases the accuracy of the battery indicator on the display of the Unite transmitters/receivers.

6.6 Service mode

• For maximum operational reliability, the Unite Cockpit Case features a so-called service mode.

• If the device is disconnected from the mains within 45 seconds after being switched on (e.g. by accidental

switching off), the device will boot in a safety mode and check itself.

• If this service mode is activated automatically (after booting unsuccessfully), the system will return to its usual

operating mode after approx. 3 minutes.

english

Unite CC – Cockpit Case

7. Technical specifications

AC input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 - 240 V AC, 50-60 Hz

Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 3.15 A (time-lag)

Nominal current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 A @115 V AC, 1.1 A @230 V

Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . 150 W with 24 charging compartments

225 W with 36 charging compartments

Max. charging time . . . . . . . . . . . . . . . . . . . . . . . . . . 4 hours

Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ethernet

USB type C

Temperature range

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +28 °C

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20 to +50 °C

Relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 90%

Dimensions incl. handle, base (L x W x H). . . . . 530 x 445 x 180 mm

[20.7" x 17.5" x 7.1"]

Weight

Unite CC-24P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 kg [27.78 lbs]

Unite CC-36P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.0 kg [28.66 lbs]

Charging compartments

Unite CC-24P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . max. 24 for bodypack transmitters / bodypack receivers

Unite CC-36P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . max. 36 for bodypack transmitters / bodypack receivers

Unite CC – Cockpit Case

Unite

Operating instructions

Unite

Landing page

8. QR Codes

english

Unite CC – Cockpit Case

Unite CC – Cockpit-Ladegerät

Das Cockpit-Ladegerät Unite CC ist für das Drahtlos-System Unite von beyerdynamic vorgesehen. Detaillierte Beschrei-

bungen zum Gebrauch entnehmen Sie bitte der Bedienungsanleitung des Gesamtsystems, welche Sie im Internet unter

www.beyerdynamic.com/unite herunterladen können.

1. Sicherheitsinformationen

Allgemein

• LESEN Sie die Bedienungsanleitung

• BEWAHREN Sie diese Bedienungsanleitung auf.

• BEFOLGEN Sie die aufgeführten Bedienungs- und Sicherheitshinweise.

Haftungsausschluss

• Die Firma beyerdynamic GmbH & Co. KG übernimmt keine Haftung für Schäden am Produkt oder Verletzungen

von Personen aufgrund unachtsamer, unsachgemäßer, falscher oder nicht dem vom Hersteller angegebenen Zweck

entsprechender Verwendung des Produkts.

1. Bitte lesen Sie diese Anweisungen.

2. Bitte bewahren Sie diese Anweisungen auf.

3. Bitte beachten Sie alle Warnhinweise.

4. Folgen Sie allen Anweisungen.

5. Verwenden Sie dieses Gerät nicht in der Nähe von Wasser.

6. Reinigen Sie das Gerät nur mit einem trockenen Tuch.

Das Blitzsymbol in einem gleichschenkligen Dreieck wei den Anwender auf eine nicht isoliee und potenziell

gefährliche Berührungsspannung innerhalb des Gerätes hin, die ark genug sein kann, um bei Anwendern

einen Stromschlag auszulösen.

Ein Ausrufezeichen in einem gleichschenkligen Dreieck wei den Anwender auf wichtige Anweisungen zum

Betrieb und Inandhaltung des Produktes in den begleitenden Unterlagen hin.

Page is loading ...

Beyerdynamic Unite CC-24P User manual

Brand: Beyerdynamic

Model: Unite CC-24P

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

Deutsch: Beyerdynamic Unite CC-24P Benutzerhandbuch

Beyerdynamic Unite CC-24P User manual

This manual is also suitable for

Beyerdynamic Unite CC-24P User manual

in other languages

Related papers

Other documents