Loxit 8016 Datasheet

Category
Projector accessories
Type
Datasheet
Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, SK12 1YJ
t: +44 (0) 845 519 5191 or +44 (0) 1625 856 801 f: +44 (0) 845 519 5192 e: sales@loxit.com w: www.loxit.com
N-Cage
®
Universal Projector Security Clamps
Retro-fit to ceiling drop pole system
Universal N-Cage Projector Locking Clamp
The N-CAGE engages all four sides of the projector.
The clamp is designed to give maximum protection
and minimum inconvenience.
Custom models can be manufactured to protect any
projector. Please contact our design office to see if
your model has been protected before.
N-Circle and N-Square
Universal Projector
Locking Clamps
The N-CIRCLE and N-SQUARE adjustable steel
clamps entrap almost all models of modern overhead
digital projector. The multi hole adjustable chassis
allows the soft edged rings to closely grip the projector
by its diagonally opposite corners whist the locking
mechanism is shielded from attack by the chassis
itself.
1.5m Heavy Duty
Cable Kit
An 11mm diameter multi strand steel cable 1500mm
long with vinyl covering and stainless steel end stops is
secured by a shielded heavy duty lock at the clamp
end. At the structure a range of anchor fixings to
concrete, timber and steelwork is provided with each
kit.
Longer cables available.
120dB Alarm
The 120dB motion sensing alarm with microchip
intelligence. The alarm is located within and protected
by the clamp chassis. The alarm gives warning chirps
to prevent accidental activation. Electronic key over
ride while is standard. When coupled to the physical
integrity of the heavy cable system maximum
protection is achieved.
  • Page 1 1

Loxit 8016 Datasheet

Category
Projector accessories
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI