Air Foxx FR-1000a User manual

Brand: Air Foxx

Model: FR-1000a

Type: User manual

Air Foxx FR-1000a is a powerful air blower specifically designed for inflating advertising puppets up to 20 feet tall. With its durable roto-molded polyethylene housing, four lockable wheels for easy maneuverability, and a long 25-foot power cord, it's ideal for local businesses seeking visual advertising solutions.

FR-1000a Advertising Puppet Air Blower

User Guide and Care Manual

Please read and save these instructions

Air Foxx Inc.

13221 Arctic Cir

Santa Fe Springs, CA 90670

Tel: (562) 802-3003

afx@jaydengroup.com

Contents

Introduction …………………………………………………... 3

Operation / Instructions ……………………………………... 4

Safety Precautions …………………………………………… 5

Maintenance / Troubleshooting …………………………….. 6

Specifications ………………………………………………… 7

Warranty / Service ……………………………………………. 8

Warranty Registration Form …………………………………. 9

Introduction

The Air Foxx FR-1000a is a special air blower designed and made for

Advertising Air Puppets. With up to 5,300 CFM of air flow, it can inflate

air puppets up to 20 feet in height.

The FR-1000a is made with high impact roto molded polyethylene for

durability, and 4 lockable wheels for easy maneuverability. This blower

is ideal for local businesses where visual advertising is needed.

Features of the FR-1000a include:

• 3/4 HP motor

• 18" diameter

• 4 lockable rolling caster wheels

• Two speeds for dierent air flow generation

• Sturdy li handles for easy maneuverability

• Extra long 25 foot power cord

Operations / Instructions

The FR-1000a is primarily used to inflate advertising puppets.

Please follow these instructions when operating the unit.

1. The FR-1000a is shipped ready-to-use. Before plugging the unit into

the power source, inspect it completely for any shipping damage.

2. Snugly attach the inflatable advertisement around the Velcro strap

on the blower housing.

3. Carefully place the blower unit on a stable, flat dry surface. Lock the

wheels to secure the unit.

4. Plug the power cord into a grounded GFCI outlet.

5. Turn the switch to the desired speed. Monitor the unit to ensure that

it operates normally.

Do not allow children to play with or around the unit. Close supervision

is necessary when the unit is used near children.

Safety Precautions

WARNING: IMPORTANT! PLEASE READ BEFORE USING PRODUCT!

Basic safety precautions should always be followed to reduce the risk of fire,

electric shock, and personal injury, including, but not limited to, the following:

1. To reduce the risk of injury, close supervision is necessary when the unit is

used near children . Do not allow children to play with or around the unit.

2. To prevent electric shock, do not operate the unit in standing water. Do not

expose to water. Never plug in or unplug the unit with wet hands or while

standing in water.

3 To reduce the risk of fire or electric shock, do not use unit with any solid-state

speed control device.

4. To avoid risk of injury, do not direct air flow at face or body.

5. Do not allow sand, small rocks and other small objects to enter the blower.

6. Do not operate the blower if cord or plug is damaged. If the power cord is

damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified person.

7. Only use the blower with GFCI protected outlets. Please contact a qualified

electrician for verification and/or installation of a GFCI receptacle if necessary.

8. Do not move or carry the blower while unit is operating.

9. Unplug the blower from the power supply before servicing or cleaning the

unit.

Maintenance Instructions

1. To clean the unit, use a damp cloth to wipe the surface of the

housing. Never clean the blower with water.

2. When not in use, unplug and store the blower in a dry, cool indoor

place.

3. Always disconnect the blower from its power source before

performing any maintenance or cleaning.

Troubleshooting

Issue Possible Cause Solution

Blower causes loud,

scraping noises

1) Obstructions entering

the blower through

intake or exhaust

2) Objects placed against

blower housing

Remove obstructions or

objects causing pressure

against blower housing

Motor does not run

1) Switch is o

2) Faulty switch or cord

Turn switch on

Replace switch or cord

Weak air flow

1) Vents or inlets are

obstructed

Clean vents or inlets

Specifications

Motor Power 3/4 HP

Voltage 110—120V

Frequency 60 HZ

Phase Single

RPM 3250 (Low) / 3450 (High)

Amps 8.3A (Low) / 8.6A (High)

Pressure 2.0 Inch

Max Air Flow 5,300 CFM

Cable 16 Gauge

Speed Control 3 Speeds

Weight 34 lbs (15.4 kgs)

Packing Size

22” x 20” x 18”

55 cm x 50.8 cm x 46.2 cm

Dimension 18” (45.5 cm)

Warranty

1 Year for Motor

5 Years for Plastic Housing

Air Foxx Limited Warranty

Air Foxx’s Limited Warranty covers the unit (excluding power cord) from defects

in material and crasmanship. The Warranty covers normal use for a term of

one year from the original date of purchase including parts, labor, and one way

shipping. Non-contiguous states must pay for return shipping.

This Warranty does not cover or apply to defects due directly or indirectly to

misuse, abuse, disassembly, alteration, corrosive chemicals, improper voltage,

fire, flood, negligence, accident, improperly or incorrectly performed

maintenance or repair, or failure to perform necessary maintenance or repair, or

if the use of this product is not in compliance with the instructions and

specifications for its use.

Service

For Warranty service and parts replacement (US users only), you must:

A. Call 1-562-802-3003 for a Return Merchandise Authorization (RMA) number.

B. Provide original proof of purchase.

C. Use either the original packaging or a certified packaging method.

Buyer will be responsible for shipping the unit (with RMA Number showing on

the shipping label) to the Air Foxx Service Department. Air Foxx will inspect,

assess and advise the buyer as to the repairs needed and the applicable cost, if

any.

For users outside the US, please contact an Air Foxx Distributor in your country

or region for Warranty service and parts replacement.

Warranty Registration

For U.S. Buyers Only

To ensure your product has the appropriate warranty coverage, please complete and mail

this form to Air Foxx, 13221 Arctic Cir, Santa Fe Springs, CA 90670. Tel: (562) 802-3303

You can also email this form as a PDF to afx@jaydengroup.com

Company Name:

Contact Person:

Title:

Address:

City:

State: Zip: Country:

Phone:

E-mail Address:

Model #:

Date of Purchase: Purchased From:

Air Foxx FR-1000a User manual

Air Foxx FR-1000a User manual

Air Foxx FR-1000a User manual

Related papers

Other documents