2. Air Foxx
  3. FR-1000a
FR-1000a

Air Foxx FR-1000a User manual

  • Hello! I am an AI chatbot trained to assist you with the Air Foxx FR-1000a User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FR-1000a Advertising Puppet Air Blower
User Guide and Care Manual
Please read and save these instructions
Air Foxx Inc.
13221 Arctic Cir
Santa Fe Springs, CA 90670
Tel: (562) 802-3003
afx@jaydengroup.com
2
Contents
Introduction …………………………………………………... 3
Operation / Instructions ……………………………………... 4
Safety Precautions …………………………………………… 5
Maintenance / Troubleshooting …………………………….. 6
Specifications ………………………………………………… 7
Warranty / Service ……………………………………………. 8
Warranty Registration Form …………………………………. 9
3
Introduction
The Air Foxx FR-1000a is a special air blower designed and made for
Advertising Air Puppets. With up to 5,300 CFM of air flow, it can inflate
air puppets up to 20 feet in height.
The FR-1000a is made with high impact roto molded polyethylene for
durability, and 4 lockable wheels for easy maneuverability. This blower
is ideal for local businesses where visual advertising is needed.
Features of the FR-1000a include:
• 3/4 HP motor
• 18" diameter
• 4 lockable rolling caster wheels
• Two speeds for dierent air flow generation
• Sturdy li handles for easy maneuverability
• Extra long 25 foot power cord
4
Operations / Instructions
The FR-1000a is primarily used to inflate advertising puppets.
Please follow these instructions when operating the unit.
1. The FR-1000a is shipped ready-to-use. Before plugging the unit into
the power source, inspect it completely for any shipping damage.
2. Snugly attach the inflatable advertisement around the Velcro strap
on the blower housing.
3. Carefully place the blower unit on a stable, flat dry surface. Lock the
wheels to secure the unit.
4. Plug the power cord into a grounded GFCI outlet.
5. Turn the switch to the desired speed. Monitor the unit to ensure that
it operates normally.
Do not allow children to play with or around the unit. Close supervision
is necessary when the unit is used near children.
5
Safety Precautions
WARNING: IMPORTANT! PLEASE READ BEFORE USING PRODUCT!
Basic safety precautions should always be followed to reduce the risk of fire,
electric shock, and personal injury, including, but not limited to, the following:
1. To reduce the risk of injury, close supervision is necessary when the unit is
used near children . Do not allow children to play with or around the unit.
2. To prevent electric shock, do not operate the unit in standing water. Do not
expose to water. Never plug in or unplug the unit with wet hands or while
standing in water.
3 To reduce the risk of fire or electric shock, do not use unit with any solid-state
speed control device.
4. To avoid risk of injury, do not direct air flow at face or body.
5. Do not allow sand, small rocks and other small objects to enter the blower.
6. Do not operate the blower if cord or plug is damaged. If the power cord is
damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person.
7. Only use the blower with GFCI protected outlets. Please contact a qualified
electrician for verification and/or installation of a GFCI receptacle if necessary.
8. Do not move or carry the blower while unit is operating.
9. Unplug the blower from the power supply before servicing or cleaning the
unit.
6
Maintenance Instructions
1. To clean the unit, use a damp cloth to wipe the surface of the
housing. Never clean the blower with water.
2. When not in use, unplug and store the blower in a dry, cool indoor
place.
3. Always disconnect the blower from its power source before
performing any maintenance or cleaning.
Troubleshooting
Issue Possible Cause Solution
Blower causes loud,
scraping noises
1) Obstructions entering
the blower through
intake or exhaust
2) Objects placed against
blower housing
Remove obstructions or
objects causing pressure
against blower housing
Motor does not run
1) Switch is o
2) Faulty switch or cord
Turn switch on
Replace switch or cord
Weak air flow
1) Vents or inlets are
obstructed
Clean vents or inlets
7
Specifications
Motor Power 3/4 HP
Voltage 110—120V
Frequency 60 HZ
Phase Single
RPM 3250 (Low) / 3450 (High)
Amps 8.3A (Low) / 8.6A (High)
Pressure 2.0 Inch
Max Air Flow 5,300 CFM
Cable 16 Gauge
Speed Control 3 Speeds
Weight 34 lbs (15.4 kgs)
Packing Size
22” x 20” x 18”
55 cm x 50.8 cm x 46.2 cm
Dimension 18” (45.5 cm)
Warranty
1 Year for Motor
5 Years for Plastic Housing
8
Air Foxx Limited Warranty
Air Foxx’s Limited Warranty covers the unit (excluding power cord) from defects
in material and crasmanship. The Warranty covers normal use for a term of
one year from the original date of purchase including parts, labor, and one way
shipping. Non-contiguous states must pay for return shipping.
This Warranty does not cover or apply to defects due directly or indirectly to
misuse, abuse, disassembly, alteration, corrosive chemicals, improper voltage,
fire, flood, negligence, accident, improperly or incorrectly performed
maintenance or repair, or failure to perform necessary maintenance or repair, or
if the use of this product is not in compliance with the instructions and
specifications for its use.
Service
For Warranty service and parts replacement (US users only), you must:
A. Call 1-562-802-3003 for a Return Merchandise Authorization (RMA) number.
B. Provide original proof of purchase.
C. Use either the original packaging or a certified packaging method.
Buyer will be responsible for shipping the unit (with RMA Number showing on
the shipping label) to the Air Foxx Service Department. Air Foxx will inspect,
assess and advise the buyer as to the repairs needed and the applicable cost, if
any.
For users outside the US, please contact an Air Foxx Distributor in your country
or region for Warranty service and parts replacement.
9
Warranty Registration
For U.S. Buyers Only
To ensure your product has the appropriate warranty coverage, please complete and mail
this form to Air Foxx, 13221 Arctic Cir, Santa Fe Springs, CA 90670. Tel: (562) 802-3303
You can also email this form as a PDF to afx@jaydengroup.com
Company Name:
Contact Person:
Title:
Address:
City:
State: Zip: Country:
Phone:
E-mail Address:
Model #:
Date of Purchase: Purchased From:
/