PAC TOYK951MG User manual

Type
User manual

This manual is also suitable for

PAC TOYK951MG is a mounting kit for installing an aftermarket radio into a 2014-15 Toyota Corolla. It includes all the necessary hardware and instructions to easily and securely mount your new radio in place. With this kit, you can enjoy your favorite music, podcasts, and audiobooks on the go without having to worry about a loose or poorly installed radio.

PAC TOYK951MG is a mounting kit for installing an aftermarket radio into a 2014-15 Toyota Corolla. It includes all the necessary hardware and instructions to easily and securely mount your new radio in place. With this kit, you can enjoy your favorite music, podcasts, and audiobooks on the go without having to worry about a loose or poorly installed radio.

CUSTOMER HELP LINE
USA 800-323-4329 Canada 800-245-8777
Toyota
2014-15 COROLLA
VEHICLE APPLICATIONS
TOYK951MG Mounting Kit
iTOYK951MG
©2015 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 1/15 PRINT Ver.1/15
WWW.AIUS.NET
2500 East Francis Street Ontario, CA 91761, U.S.A.
USA Sales (800) 336-6500
Canada Sales (888) 922-3006
For information about other American International automotive
accessories visit our website at:
http://www.aius.net
FIG.A
1. Using a soft tool, carefully unclip and remove the top dash trim that surrounds the clock
from the right to the left.
2. Using a soft tool, carefully unclip and remove the trim around the factory radio that
includes the hazard button and airbag light display.
3. Unplug the hazard button, move panel aside. Do not unplug airbag light.
4. Remove (4) 10mm bolts from the bottom and top of the OEM Radio brackets.
5. Loosen the OEM radio and unplug all harness. Remove.
6. Remove (2) OEM plastic retainer clips from the OEM radio and save for
the kit assembly.
DASH DISASSEMBLY AND RADIO REMOVAL
KIT ASSEMBLY INSTRUCTIONS
Single ISO Mount Applications
1. Reinstall the (2) OEM plastic retainer clips onto the TOYK951MG posts.
2. Insert pocket into lower section of the mounting brackets, snap into slots.
3. Install brackets to rear of main frame using the (6) screws provided.
(Do Not Over tighten).
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
5. Slide radio forward or backward for desired look and tighten screws.
6. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio (optional).
2 3
FIG.B
D
ouble DIN Mount Applications
1. Reinstall the (2) OEM plastic retainer clips onto the TOYK951MG posts.
2. Install brackets to rear of main frame using the (6) screws provided.
(Do Not Over tighten).
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
4. Slide radio forward or backward for desired look and tighten screws.
5. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio (optional).
  • Page 1 1
  • Page 2 2

PAC TOYK951MG User manual

Type
User manual
This manual is also suitable for

PAC TOYK951MG is a mounting kit for installing an aftermarket radio into a 2014-15 Toyota Corolla. It includes all the necessary hardware and instructions to easily and securely mount your new radio in place. With this kit, you can enjoy your favorite music, podcasts, and audiobooks on the go without having to worry about a loose or poorly installed radio.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI