PAC BKMAZK855 User manual

PAC
Brand
PAC
Model
BKMAZK855
Type
User manual

This manual is also suitable for

PAC BKMAZK855

The PAC BKMAZK855 is a mounting kit for aftermarket radios in Mazda vehicles. It allows you to install a new radio while retaining the factory look and feel of your dashboard. The kit includes everything you need to install a single or double DIN radio, including the mounting brackets, trim pieces, and hardware.

Here are some of the features and benefits of the PAC BKMAZK855:

  • Designed specifically for Mazda vehicles
  • Allows you to install a single or double DIN aftermarket radio
  • Retains the factory look and feel of your dashboard
  • Includes all necessary mounting brackets, trim pieces, and hardware

PAC BKMAZK855

The PAC BKMAZK855 is a mounting kit for aftermarket radios in Mazda vehicles. It allows you to install a new radio while retaining the factory look and feel of your dashboard. The kit includes everything you need to install a single or double DIN radio, including the mounting brackets, trim pieces, and hardware.

Here are some of the features and benefits of the PAC BKMAZK855:

  • Designed specifically for Mazda vehicles
  • Allows you to install a single or double DIN aftermarket radio
  • Retains the factory look and feel of your dashboard
  • Includes all necessary mounting brackets, trim pieces, and hardware
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 01/17 PRINT Ver. 6/12
MAZK855 Mounting Kit
VEHICLE APPLICATION
Mazda
2013-2016 CX5
2014-2015 MAZDA6
iMAZK855
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
Single ISO Mounting Applications
DASH DISASSEMBLY & RADIO REMOVAL INSTRUCTIONS
1. Using a soft tool, carefully unclip center dash trim from above glove box to below
the radio, working right to left.
2. Unplug hazard switch and remove panel.
3. Remove radio trim panel.
4. Remove (1) bolt from the bottom and (2) screws from the sides of the OEM Radio.
5. Unclip the OEM radio and remove. Unplug harness.
KIT ASSEMBLY INSTRUCTIONS
1. This kit is an (ISO) mounting kit only. The mounting sleeve of your new radio and trim
ring cannot be used when ISO mounting an aftermarket radio. Your radio must have a
removeable trim ring.
2. Snap & screw the side trim pieces to the IMB855 L&R as shown in Figure A.
DO NOT attach the (4) metal clips included with the kit yet.
3. Insert pocket into lower section of kit from rear & lock into slots of mounting brackets.
4. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or screws supplied with kit.
5. Slide radio forward or backward for desired look and tighten screws.
6. Test t kit/radio by mounting it using the (2) OEM screws, and making sure the main
frame of the MAZK855 aligns correctly and does not leave any gaps when installed.
If everything looks correct go to step #7. If not, go back to step # 5.
7. Attach the metal panel fastener clips (included with kit) (4) to each mounting tab on
the back side of the MAZK855 panel.
8. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio.
2
3
Double DIN Mounting Applications
KIT ASSEMBLY INSTRUCTIONS
1. Snap & screw the side trim pieces to the IMB855 L&R as shown Figure B.
DO NOT attach the (4) metal clips included with the kit yet.
2. Insert radio between ISO mount brackets and loosely attach to sides of radio
using screws provided with radio when possible or hardware included with kit.
3. Slide radio component forward or backward for desired look and tighten screws.
4. Test t kit/radio by mounting it using the (2) OEM screws, and making sure the
main frame of the MAZK855 aligns correctly and does not leave any gaps when
installed. If everything looks correct go to step #5. If not, go back to step # 3.
5. Attach the metal panel fastener clips (included with kit) (4) to each mounting tab
on the back side of the MAZK855 panel.
6. Attach a rear support bracket to the rear of the new radio and adjust as necessary
to support the weight of the radio.
Fig. A
Fig. B
IMB855 Left
IMB855 Right
IMB855 Left
IMB855 Right
Remove shaded tabs
on left and right sides
of the brackets
(Right side not shown)
  • Page 1 1
  • Page 2 2

PAC BKMAZK855 User manual

PAC
Brand
PAC
Model
BKMAZK855
Type
User manual
This manual is also suitable for

PAC BKMAZK855

The PAC BKMAZK855 is a mounting kit for aftermarket radios in Mazda vehicles. It allows you to install a new radio while retaining the factory look and feel of your dashboard. The kit includes everything you need to install a single or double DIN radio, including the mounting brackets, trim pieces, and hardware.

Here are some of the features and benefits of the PAC BKMAZK855:

  • Designed specifically for Mazda vehicles
  • Allows you to install a single or double DIN aftermarket radio
  • Retains the factory look and feel of your dashboard
  • Includes all necessary mounting brackets, trim pieces, and hardware
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents