Elinchrom Hooded Diffusers User manual

Type
User manual

This manual is also suitable for

Hooded Diffusers Operation Manual
English / Deutsch / Français / Italiano / Español / РУССКИЙ / 中文
Hooded Diffusers 04.2010 (N° 73006)
OPERATION MANUAL
GEBRAUCHSANLEITUNG
MANUEL D’UTILISATION
MANUALE D’USO
MANUAL DE FUNCIONAMIENTO
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Fitting of Hooded Front Diusers for Rotalux Softboxes
1. Assemble the softbox
without the front Diuser and
place it on a oor or table.
2. Lay the Hooded Diuser
over the softbox.
3. Pull the capped end of the
rod from the corner pocket of
the softbox.
4. Locate the Velcro™ strip in the corner of the
cover and push the capped end of the rod all
the way through.
5. Replace the capped end of the rod
into the corner pocket and fold the
cover over the corner of the softbox.
Please Note: The same technique is used to t the Square, Rectangular,
Octagonal and the Rotagrid Diuser.
English
©2010 Elinchrom S.A. (LTD) switzerland www.elinchrom.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Elinchrom Hooded Diffusers User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI