2. Computers & electronics
  3. Audio & home theatre
  4. Remote controls
  5. ADB
  6. Remote Control

ADB Remote Control Programming Manual

  • Hello! I am an AI chatbot trained to assist you with the ADB Remote Control Programming Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Programming Your Remote Control
Programming with Automatic Search:
• StartwiththeTVturnedon.
• Press&releasetheTVbutton.
• Press&holdtheRCUSETUPbutton
untiltheTVbuttonblinkstwice.
•Enter9-9-1.TheTVbutton will
blinktwice.(9-9-1shouldNOTappear
ontheTVscreen)
• AimtheremoteattheTV,thenPress
&releasethePOWERbutton.
• Press & release the CH+ or CH-
(Channel) buttoncontinuouslyuntil
theTVturnso.
• PressthePOWERbutton toturn
theTVbackon.
• PresstheRCUSETUPbutton to
storethecodefor the TV. The TV
buttonwillblinktwice.
Notes: If either the CH (Channel) or VOL
(Volume) buttons don’t function correctly you
may need to go through the steps above again
until the remote nds another code for the TV.
By default the TV channel should be set to
Channel 3. Please make a note if the MHTC
technician states otherwise.
Volume Lock:
Control the volume on your TV regardless
of what “device” is selected (TV, STB, etc):
• Press&releasetheTVbutton.
• Press&holdtheRCUSETUPbutton
untiltheTVbuttonblinkstwice.
• Enter9-9-3.
• Press&releasetheTVbutton.e
TVbuttonwillblinktwice.
Programming One Touch Power:
Control the power to the TV without
turning o the Set-Top Box. (2 Steps)
Step 1 - Clearing One-Touch Power:
• Press&releasetheSTBbutton.
• Press&holdtheRCUSETUPbutton
untiltheSTBbuttonblinkstwice.
• Enter 9-8-0. e STB button will
blinkseveraltimes.
Step 2 - Setting One-Touch Power:
• Press&releasetheSTBbutton.
• Press&holdtheRCUSETUPbutton
untiltheSTBbuttonblinkstwice.
• Enter9-9-5.
• Press&releasethePOWERbutton.
• Press&releasetheTVbutton.
• Press&releasethePOWERbutton.
• Press&releasetheSTBButton.
• Press&holdtheRCUSETUPbutton
untiltheSTBbuttonblinkstwice.
• PressPOWER totestif successful
(TVshouldturnowhileSet-topbox
remains on); if not you must repeat
bothStep1andStep2.
e Learning Feature:
Transfer functions from a FACTORY
remote control to the MHTC remote.
ese instructions are available on our
website,www.mhtc.net.
Mount Horeb Oce 437-5551
Dodgeville Oce 930-9985
Tech Support: 1-800-843-5827
TVButton
RCUSETUP
Button
POWER
Button
CH(Channel)
+/-Button
STBButton
Programming Your Remote Control
Programming with Automatic Search:
• StartwiththeTVturnedon.
• Press&releasetheTVbutton.
• Press&holdtheRCUSETUPbutton
untiltheTVbuttonblinkstwice.
•Enter9-9-1.TheTVbutton will
blinktwice.(9-9-1shouldNOTappear
ontheTVscreen)
• AimtheremoteattheTV,thenPress
&releasethePOWERbutton.
• Press & release the CH+ or CH-
(Channel) buttoncontinuouslyuntil
theTVturnso.
• PressthePOWERbutton toturn
theTVbackon.
• PresstheRCUSETUPbutton to
storethecodefor the TV. The TV
buttonwillblinktwice.
Notes: If either the CH (Channel) or VOL
(Volume) buttons don’t function correctly you
may need to go through the steps above again
until the remote nds another code for the TV.
By default the TV channel should be set to
Channel 3. Please make a note if the MHTC
technician states otherwise.
Volume Lock:
Control the volume on your TV regardless
of what “device” is selected (TV, STB, etc):
• Press&releasetheTVbutton.
• Press&holdtheRCUSETUPbutton
untiltheTVbuttonblinkstwice.
• Enter9-9-3.
• Press&releasetheTVbutton.e
TVbuttonwillblinktwice.
Programming One Touch Power:
Control the power to the TV without
turning o the Set-Top Box. (2 Steps)
Step 1 - Clearing One-Touch Power:
• Press&releasetheSTBbutton.
• Press&holdtheRCUSETUPbutton
untiltheSTBbuttonblinkstwice.
• Enter 9-8-0. e STB button will
blinkseveraltimes.
Step 2 - Setting One-Touch Power:
• Press&releasetheSTBbutton.
• Press&holdtheRCUSETUPbutton
untiltheSTBbuttonblinkstwice.
• Enter9-9-5.
• Press&releasethePOWERbutton.
• Press&releasetheTVbutton.
• Press&releasethePOWERbutton.
• Press&releasetheSTBButton.
• Press&holdtheRCUSETUPbutton
untiltheSTBbuttonblinkstwice.
• PressPOWER totestif successful
(TVshouldturnowhileSet-topbox
remains on); if not you must repeat
bothStep1andStep2.
e Learning Feature:
Transfer functions from a FACTORY
remote control to the MHTC remote.
ese instructions are available on our
website,www.mhtc.net.
Mount Horeb Oce 437-5551
Dodgeville Oce 930-9985
Tech Support: 1-800-843-5827
TVButton
RCUSETUP
Button
POWER
Button
CH(Channel)
+/-Button
STBButton
Remote Control Quick Reference Guide
Equipment Controls
(Mode Buttons)
TV & Volume Controls Navigation Controls
DVR / PVR
Controls
* Speed increases each time you
press the button (up to four times).
May also be used to control VCR/DVD.
Fast Forward*
Play
Record
** Only available on STB Model #3800.
Pause
Stop
Rewind*
Menu Press to display the
Settings Menu.
OK Used to select a program
or highlighted object.
PG (Page) +/- Scrolls a full
page within the Guide.**
Guide Press to view the
on-screen program guide.
Arrows Used to move the
highlighted area on screen.
Info - Press to display
program information.
Exit - Press to exit the guide
and menu.
Last Press to return to the
last channel viewed.**
CH (Channel) +/- Changes
TV channels. Scrolls a full
page in the Guide.
Day +/- Press to scroll side
to side within the guide.**
Number Pad Used to
enter channel numbers,
passwords or text.
CC (Closed Captioning)
Press to turn CC on or off.
Vol (Volume) +/- Press to
increase/decrease volume.
Mute Press to turn sound
on or off.
Delete Press to delete a
single character in text boxes.
STB (Set Top Box)
Controls STB functions.
AUX (VCR, Stereo, Etc)
Controls AUX funtions.
DVD
Controls DVD funtions.
Power
Turn components On/Off.
TV
Controls TV functions.
AUD (Audio)
Controls AUD functions.
Revised 6/5/2009
Remote Control Quick Reference Guide
Equipment Controls
(Mode Buttons)
TV & Volume Controls Navigation Controls
DVR / PVR
Controls
* Speed increases each time you
press the button (up to four times).
May also be used to control VCR/DVD.
Fast Forward*
Play
Record
** Only available on STB Model #3800.
Pause
Stop
Rewind*
Menu Press to display the
Settings Menu.
OK Used to select a program
or highlighted object.
PG (Page) +/- Scrolls a full
page within the Guide.**
Guide Press to view the
on-screen program guide.
Arrows Used to move the
highlighted area on screen.
Info - Press to display
program information.
Exit - Press to exit the guide
and menu.
Last Press to return to the
last channel viewed.**
CH (Channel) +/- Changes
TV channels. Scrolls a full
page in the Guide.
Day +/- Press to scroll side
to side within the guide.**
Number Pad Used to
enter channel numbers,
passwords or text.
CC (Closed Captioning)
Press to turn CC on or off.
Vol (Volume) +/- Press to
increase/decrease volume.
Mute Press to turn sound
on or off.
Delete Press to delete a
single character in text boxes.
STB (Set Top Box)
Controls STB functions.
AUX (VCR, Stereo, Etc)
Controls AUX funtions.
DVD
Controls DVD funtions.
Power
Turn components On/Off.
TV
Controls TV functions.
AUD (Audio)
Controls AUD functions.
Revised 6/5/2009
/